ALARD EQUIPMENT CORP.
6483 Lake Avenue
PO Box 57
Williamson, NY  14589-0057  U.S.A.
315-589-4511 (voice),  315-589-3871 (fax)

Fresh Cut Equipment Listings

We have chosen for display here, a sampling of the used food processing machinery & equipment items we have available for sale which best apply to FRESH CUT vegetable and fruit process applications: for companies that prepare pre-cut fresh salads, precut fresh vegetable, or prepared fresh fruit products, and/or "wet salads". We may from time to time show items we have listed available for sale elsewhere, but most, if not all of what you will see here is available from our on-site inventory.

The listing of items you will find (below) is just a small portion of the equipment we have in stock and/or available for sale elsewhere. If you NEED to buy an item you cannot find here, PLEASE CALL us at 315-589-4511, or Email us; we may have it in stock, or be able to find it for you!

A - Accumulation, Air Blowers, Air Cleaners, Air Compressors, Air Dryers, Air Fans, Apple, Augers
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .

ACCUM/FEED- Accumulation disk, 48" dia, SS disk, MS shrouds & support frame, 2.5"H rails, underside rollers to support full containers. (Y0954)
ACCUM/FEED- Accumulation Disk, 48" dia, SS disk, SS shrouds, painted steel support frame, w/underside rollers, HAUSER. (Y0743)

ACCUM/FEED- Bi-directional Accumulation Table, 4'W x 24'L line surge conveyor, SS frame, MS wire woven belt. (Z7040)
ACCUM/FEED- Bi-directional Accumulation Table, 5'W x 18'L line surge conveyor, SS chain, 1/2 HP varispeed. (C0832 )

ACCUM/FEED- Unscrambler / single filer conveyor, 16"W x 12'L, (2) side-by-side belts with converging guide rails, reject device at infeed, SS const. (Y0934)

AIR COMPRESSOR- 075 HP, screw, 100/110psig, air cooled, SULLAIR, Model 16BS-75L ACAC.  (Z8834)
AIR COMPRESSOR- 100 HP, screw, 110 psi, in acoustic cabinet w/165psi surge tank, JOY, TWIST-AIR III. (Z8992)

AIR FAN- 24" dia, all SS, (2) blade propeller, 1/4 HP, adj angle stand, AEROVENT, Model PU-243, (Z3476 )

APPLE SLICER- PEASE, 1 head, Model GE40-1, SS frame & top, 36"W x 27"D work table, excellent, ready to go condition! (Y0167)
APPLE SLICER- PEASE, 2 head, Model GE120-2, SS table, with extra feed chute, trim table, and peeler stand . (Z9564)
APPLE SLICER- PEASE, 4 station, wedge slicing line, SS tabletop 28"L x 10'W x 43" high, painted steel frame, good cond. (Z9605)
APPLE SLICER- PEASE, 5 station, SS table, 9'8"W x 28.5"D x 38" high, MS frame; with dip tank.. (Z8592)
APPLE SLICER- ring, rotary, set for 1/2" thickness, all SS, 6' dia. top with diverts. (Z7275)

ASEPTIC- clean room  / aseptic process enclosure, 16'L x 10'W x 8'H, plus air shower and vestibule. (Z8810)
 

B - Bag Inserters, Bag Sealers, Baskets, Bean Graders, (Unsnipped) Bean Remover,
Bean Snippers, Blanchers, Boilers, Bottle, Braising Pans, Breaders, etc.

This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .

BAG SEALER- band, DOBOY, Model CBS-CH. SS enclosure, painted steel stand, 15"L seal bars. (Z8396)
BAG SEALER- band, DOBOY, Model CBS-CH. SS enclosure, SS stand, 15"L seal bars. (Z8397)
BAG SEALER- band, PACKRITE, Model 6000, available w/coder, trimmer, SS adjust height stand, etc. NEW! (Z4387)
BAG SEALER- band, PACKRITE, Model 6000, w/SS stand, SS btm plates, flat seal, on casters, R to L. NEW IN STOCK! (Y0878)
BAG SEALER- band, PACKRITE/CMI Model CBS-S delicate product bag squeezer / band sealer. (Z9384)

BAG SEALER- chamber type, single, vac, HENKOVAC, Model H2000, 19"L seal bars, SS case, very good operational condit! (Z7558)
BAG SEALER- chamber type, single, vac only, MINIPACK, dual bars 17.5" L, chamber 18" x 18" x 4.5"deep, SS cabinet. (Y0109)
BAG SEALER- chamber type, dual, vac/gas, KOCH MULTIVAC, Model AG800, 31"L x 25"W,x 3.25"D chambers ea w/dual 24" seal bars. (Y0320)
BAG SEALER- chamber type, dual, vac, NANTONG, Model DZ 500 2SB. NEW! ( Z6128 )

BAG SEALER- jaw, atmos, VERTROD, Model "Technaseal", all MS, pneumatic op seal bar 15"W set for 1/4" seal. (Z8282)
BAG SEALER- jaw, vac, gas, CVP Model A600, 32" seal bar, bag stretcher, all SS, twin snorkel, SS frame, PLC. (Z9523)
BAG SEALER- jaw, vac, gas, VERTROD, Model 54PCVS-SP, 50" seal bar. ( Z5083 )

BAG SEALER- other, GAS BLENDER, (2) gas, 700 scfh (330 lpm), CO2/O2 only proportional blender, SS shrouded, SMITH EQUIPMENT, Model 299040F. (Y0697)
BAG SEALER- other, GAS BLENDER, (2) gas, 700 scfh (330 lpm), CO2/O2 only proportional blender, SS shrouded, SMITH EQUIPMENT, Model 299040F. (Y0698)

BEAN SNIPPER- CRCO Model BST, plastic pockets, painted frame. (Z7568)
BEAN SNIPPER- Hughes Model 441146-51, all SS, mid-size / 2,500 lbs/hr, in stock, good condition. (Y1095)
 
 

C - Case Erectors, Case Packers, Case Sealers, Checkweighers,  Coders, Conveyors, Cookers,  Corers, Corn Huskers, Cutters, etc...

This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .

CASE ERECTOR- automatic, erector/sealer,  PEARSON, Model R211, hot glue btm seal, mfg rates <>30cpm, in VERY good condition. (Z9876)
CASE ERECTOR- auto/semi auto, erector/presenter,  SALWASSER, Mod E-43, Mfg rated up to 20 cases/min. ( Z4332 )

CASE SEALER- tape, automatic, top only, ELLIOTT, Model HMT-Mini, w/indexing & flap handling. (Z6246)
CASE SEALER- tape, automatic, top only, ELLIOTT, Model HMT-Mini, w/indexing & flap handling. (Z6247)
CASE SEALER- tape, automatic, top/bottom, random, 3M, Model 700R,  powered top & btm belt transfer, 2" tape heads. (Z9294)
CASE SEALER- tape, automatic, top/bottom, random, 3M, Model 700R,  powered top & btm belt transfer, 2" tape heads. (Z9295)

CASE SEALER- tape, semiautomatic, top/bottom, 3M Model 12A, powered side belt transfer, 2" tape heads. (Z9673)

CASE TURNER- belt type, KAYAT, Model T-100-LH, dual belts each w/varispeed controls. (Z9780)

CENTRIFUGAL SEPARATOR - ALFA LAVAL, Model BRPX513-SFD-31-CGL-60, centrifuge clarifier, 40HP, SS contacts. (Y0435)

CHECKWEIGHER- belt, CINTEX, Model CS4000 IQC, TWO-LANE, ea w/2 chain xfer cnvyrs, 3.5"W x 13" weighcells, all SS construction. (Y0864)
CHECKWEIGHER- belt, ISHIDA/PISCES, Model MS7000, SS & aluminum const, belt transfer, 10" x 19" weigh section. (Z9674)

CHEESE SHREDDER- HALLDE, Model FC-300 "Magnum", SS & alum const, mfg rated to 7,700 lb/hr. NEW. (Z9049)

CODER- container, inkjet, VIDEOJET, Model EXCEL, single head, SS cabinet. (Z8107)
CODER- container, inkjet, VIDEOJET, Mod  Excel 20, twin head, SS cabinet, with stand. (Z3149 )
CODER- container, inkjet, VIDEOJET, Mod 178i, single head, SS cabinet w/stand. (Z8836)
CODER- container, inkjet, WILLETT/LABELJET, Mod 3840, single head, bar code suitable. ( Z1981 )

CONVEYOR- belt, 12"W x 12'L, all SS, rabbit ear (trough belt), w/3ph drive, belt used o/w very good condition. (Z7783)
CONVEYOR- belt, 16"W x 32'4"'L, SS frame, rubber food grade belt, 2"H sides, with gates for distribution / feed conveyor use. (Z9408)
CONVEYOR- belt, 18"W x 12'L, all SS, rubber food grade belt, SS drive/idler rollers, we have new belt & varispeed control to install, will be excellent. (Y0110)

CONVEYOR- belt, elevating, 11"W x 7'L, SS contacts, MS frame, food grade belt w/1.5"cleats on 8" centers. (Z9855)
CONVEYOR- belt, elevating, 11"W x 10'L, all SS, rubber ribbed belt, 5" high infeed, 61" high discharge height. (Y0911)
CONVEYOR- belt, elevating, 11.5"W x 22'L, all SS, food grade belt w/2" H cleats on 15" centers, 5"H SS sides. (Z9357)
CONVEYOR- belt, elevating, 12"W x 10'L, all SS, Z-SHAPED / gooseneck config, 58"L horz inf sect, 56"L incline, SS frame & bed. (Y0856)
CONVEYOR- belt, elevating, 12"W x 11'L, all SS, 3"H cleats on 16" ctrs, small infeed HOPPER, 37" infeed/68"H dischg, 1HP drive. (Y1096)
CONVEYOR- belt, elevating, 12"W x 12'L SS conveyor, 2"H cleats, 6"H sides, MS pulleys, MS legs. (Z9633)
CONVEYOR- belt, elevating, 12"W x 17'L all SS, 2"H cleats, 7"H sides, full underpan, partial hinged top covers. (Z9768)
CONVEYOR- belt, elevating, 14"W x 15'6"L, 45-degree right angle, all SS, 8'L inf sect, then turn onto 6'6"L incline. (Y0936)
CONVEYOR- belt, elevating, 15"W x 16'L intralox type belt, all SS, w/HOPPER, 8' discharge ht, 7"H hand-removable sides. (Y1046)
CONVEYOR- belt, elevating, 18"W x 5'L, all SS, galvanized Laporte belt, 7/8" max openings, 3.5"H sides, with drive. (Z9181)
CONVEYOR- belt, elevating, 18"W x 14'L, SS contacts, rubber belt, 2"H cleats on 12"ctrs, 6"H SS conveyor sides. (Z9871)
CONVEYOR- belt, elevating, 18"W x 12'6"L rubber belt, 2"cleats on 12"centers, SS frame which is (oddly enough) painted. (Z9844)
CONVEYOR- belt, elevating, 18"W X 18'L, intralox type, cleated, all SS GOOSENECK / Z conveyor,. 3"H cleats on 9" centers. (Y1091)
CONVEYOR- belt, elevating, 36"W x 11'L, all SS, rubber belt, removable 30"W x 54"L x 10"D tapered infeed hopper, shallow incline. (Y0862)
CONVEYOR- belt, elevating, 38"W x 13'L, cleated black rubber belt, MS frame w/SS paint, .5"cleats on 8" ctrs, 4"H sides. (Z8595)

CONVEYOR- case, gravity, 9.5"W X 40'L, (4) sections 10' each, galvanized construction w/ 1.5"dia alum rollers. (Z9907)
CONVEYOR- case, power, belt, 18"W x 22'8"L belt, for up to 26" wide case, painted steel const.. (Z8924)
CONVEYOR- case, power, roller, 15.5"W x 10'L, Hytrol. 1/3 HP 3ph motor. (Z8331)
CONVEYOR- case, power, roller, 21"W x 25'L,  rubber band drive for low-pressure accumulation, ACS Model LS-190. (Z9906)

CONVEYOR- tabletop, 3.25"W, 90 DEGREE turn, plastic delrin chain, all SS. (Z8688)
CONVEYOR- tabletop, 6"W x 39'L, aluminum body w/MS drive mount, 6"W plastic chain. (Z8699)

CONVEYOR- vibrating, -- See VIBRATING CONVEYOR (below).

COOLER- conveyor, 48"W x 25'L food grade belt under SS gable top, 30" clearance, for ambient air cooling, on painted steel frame. ( Z5951 )

COOLER- spray cooler, 24"W x 12'L belt, all SS, SS wire belt w/1/4" openings, USDA sanitary  / washdown, MBC Model MA7. (Y0058)
COOLER- spray cooler, 36"W X 15'L belt, all SS, Laporte belt w/1/2"x 1/2"openings, air knife on dischg, VG condition! (Z8946)

CUTTER- carrot stick maker, GRIFFIN, tabletop/semi auto, safety cover actuated, 110v 1ph. (Z9496)
CUTTER- carrot stick maker, GRIFFIN, continuous, hand-place onto step feed, also for celery. (Z9385)
CUTTER- carrot stick maker, GRIFFIN, continuous, hand-place onto step-feed, also for celery. (Z9482)

CUTTER- HAMMERMILL, 26" x 18" throat, 60 HP, SS, swinging hammers on disk type rotor. (Z6551)

CUTTER- length/increment/segment cutter, set 7/8" cuts, SS circ knives, MAGNUSON, SHUFFLO, w/step feeder, all SS. (Y0402)

CUTTER- melon, WEIGH RIGHT, melon DICER, all SS, wedge / slice, 25-30 cycles/min. In stock, VG condition. (Z8075)
CUTTER- melon, BOCK, Model AMD-LH, all SS, w/inf conveyor, wedge & dice cuts, melon, pineapple. (Y0330)
CUTTER- melon, halver, 3 lane, all SS, ea infeed lane 22"L x 9"W x 5"deep, 3 or 6 melons per cycle, pneumatic. (Z9346)

CUTTER- shredder, plastic bottle shredder, ALLEGHENY, Model BC-13 "Leeter Eeter" for shredding PET beverage bottles. (Z8437)

CUTTER- slicer, A.K. ROBINS STRIP CUTTER, 1" cuts, (19) 18"dia blades, prev used leafy vegetables. (Z7103)
CUTTER- slicer, EILLERT, Model G-3300, all SS, 9"Wx110"L belt w/powered top hold down. (Z6603)
CUTTER- slicer, HOLAC, Model VS-14, all SS, 6"W x 58"L flat inf belt w/14" powered hold down belt, 4"H sides. (Z9392)
CUTTER- slicer/dicer, HALLDE, Model FC-300 "Magnum", SS & alum const, mfg rated to 7,700 lb/hr. NEW!! (Z9049)
CUTTER- slicer/dicer/shredder, DITO DEAN, Model TR-250, general purpose vegetable cutter, w/stand or as countertop, NEW. (Z2341 )

CUTTER - URSCHEL -- see below under "U" for URSCHEL slicers, dicers, Comitrols, cutters...

D - Destoners, Detectors, Dryers, Dumpers
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .

DESTARCHER- REKO, Model CYCLOON 300ZA, 47"L x 31"W SS tank, 4" in/out. (Z6629)

DESTONER- hydrolift, ALLEN, vertical, 16" dia screw, approx discharge ht 120", painted steel const. (Z4711 )

DETECTOR- dud, plastic bottle inspection sys, White Cap - Silgan Model 51R42, fits over conveyor, all SS, pwr ht adj. (Z9961)
DETECTOR- label, ACE, Model 600, 7.25"dia x 12"H max container size, 600cpm, detects/rejects loose/bad labels . (Z1729)

DETECTOR- metal, 1.25"H x 36"W aperture, digital, GORING KERR DSP w/34"W by 6' L belt-conveyor, pull-bk reject. (Z7550)
DETECTOR- metal, 3"H x 36"W aperture, GORING KERR TEK2, head only, VG operational ready to go!. (Z9934)
DETECTOR- metal, 2 5/8"H x 10"W aperture, GORING KERR w/SS belt-conveyor w/reject. (Z5976)
DETECTOR- metal, 3.25"H x 8.5"W aperture, digital, all SS, CINTEX/LOMA, SENTRY, 8"W x 52"L SS conveyor belt. (Y0863)
DETECTOR- metal, 3.75"H x 7"W aperture, digital, RAMSEY, Metal Scout II, SS head, w/6"W x 5'L belt-conveyor. (Z8087)
DETECTOR- metal, 4"H x 16"W aperture, head only, ERIEZ EZ TEC3, stainless steel, ready to go! (Z7966)
DETECTOR- metal, 10.5"H x 19.75"W aperture, digital, LOCK Met 30+IP69, 3-frequency, 17"W by 6'L conveyor, all SS, washdown, in-stock NEW. (Y1104)
DETECTOR- metal, 15"H x 56"W aperture, HEAD ONLY, GORING KERR TEK21, excellent condition, ready to go!. (Z9471)

DETECTOR- metal, drop-thru, 4"dia x 9"L aperture, digital, FORTRESS PHANTOM, SS, like new condition. (Y0739)
DETECTOR- metal, drop-thru, 6"dia x 6" aperture, digital, GORING KERR TEK21 DSP, SS head and frame w/pneumatic reject. (Z9933)
DETECTOR- metal, drop-thru, 12"dia x 15"L aperture, digital, LOMA IQ, SS, w/SS control box, touchpad controls, horn-alarm reject. (Y0753)

DRYER- spin, BOCK, Model FP-90, 7.36 cu ft, removable basket, SS contacts SS base. (Z9638)
DRYER- spin, BOCK, Model FP90A, 7.36 cu ft, removable basket, SS contacts, SS base, USDA sanitary model. (Y1044)

DUMPER- bin, all SS, 44.5"W x 48"L, 2500 lb cap., NEW w/on board hydraulic pump and operator controls. NEW! (Z2993 )
DUMPER- bin, all SS, 45"W x 48"L, 4,000 lb cap., REFURBISHED w/new cylinders, on-bd hydraulic pump, control valve. (Y0789)

E - Extractors, Extructors

EXTRACTOR - also see "PRESS "

F - Feeders, Fillers, Filters
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .
 

FEEDER- belt, weigh, MERRICK, Model 950, 20"W x 48"L food grade belt, all SS, USDA listed. (Z3038)
FEEDER- belt, weigh, MERRICK, Model 950, 20"W x 48"L food grade belt, all SS. (Z4212 )

FEEDER- conveyor belt, with or without hopper: Also see CONVEYOR- BELT (above).
FEEDER- hopper-feeder: Also see HOPPER- FEEDER (below).

FEEDER- vane type, PRATER VALVE, all SS, 8"x8" infeed, 5"x8" discharge. (C0562)

FEEDER - vibratory:  See VIBRATING CONVEYOR (below).

FILLER- bag, automatic, vacuum, gas flush, for premade wicketed bags, all SS, GATES Model WW2K-EZ "Wicket Wizard", like new. (Z9644)

FILLER- bag, manual / hand-pack BAGGING TABLE, 1 bag packing station, all SS. (Y1097)
FILLER- bag, manual / hand-pack  BAGGING TABLE, 1 bag packing station, w/scale, bag holders, etc, all SS, NEW! (Y0500)
FILLER- bag, manual / hand-pack BAGGING TABLE, 2 bag packing stations, all SS. (Y1098)
FILLER- bag, manual / hand-pack  BAGGING TABLE, 2 bag packing stations, w/scales, bag holders, etc, all SS, NEW!. (Z4912 )

FILLER- bag, semiautomatic, leafy greens / spinach filler, PREPACK, adj in 1/4 oz increments to 1lb per stroke, all SS. (Z4369)
FILLER- bag, semiautomatic, leafy greens / spinach filler, PREPACK, adj in 1/4 oz increments to 1lb per stroke, all SS.. (Z4370)
FILLER- bag, semiautomatic, leafy greens / spinach filler, PREPACK, adj in 1/4 oz increments to 1lb per stroke, all SS. (Z6461)

FILLER- cup/tray/tub, rotary hand-packing table, SS & UHMW USDA washdown construction, PALCON SYSTEMS; like new. (Z9922)

FILLER- auger, ALL FILL, Model SHA-300, 1 head, automatic w/thru-conveyor, Cerebus II controls, in VERY good condition!. (Z7503)
FILLER- auger, ALL FILL, Model THA, 2 head, automatic w/thru-conveyor, bulk/dribble, control panel w/Digicount timers. (Z8055)
FILLER- auger, MATEER, Model 33A, 1 head, automatic, w/thru-conveyor, Digicount controls. (Z7128)

FILLER- netweigh, semiautomatic, LOGICAL MACHINE, Model S-4, single lane linear scale, bulk & dribble netweigher, digital scale, NEW. ( Z5538 )
FILLER- netweigh, semiautomatic, POWELL, Model AWCS125, single lane linear scale, SS contacts, foot pedal, digital scale. (Z5960)

FILLER- Form/Fill/Seal, vertical (VFFS), weigh, ILAPAK Vegetronic 300 , single tube. (Z6872)
FILLER- Form/Fill/Seal, vertical (VFFS), weigh, TRIANGLE Model SB95C, single tube, w/10 bucket radial combination scale. (Z9703)
FILLER- Form/Fill/Seal, vertical (VFFS), weigh, WRIGHT, Model 601, single tube, linear scale fills 6 oz to 2 lb, POLY bags. (Z7563)

FILLER- piston, 01 piston, 016oz max fill per stroke, inline, semiauto, pneumatic, w/cone infeed hopper, SS contacts, w/cut-off valve on disch, Autoprod. (Z8157)

FILLER- tray, weigh, NEWTEC Model NBM31F/2009PC, FOR CLAMSHELL TRAYS, w/9 lane linear scale, all SS. (Z9103)

FILLER- tumble, SOLBERN, Mod TPTF-DP, portion control, change parts available, all SS.( Z1837 )

FILTER- vertical tank / horizontal plate, 340 sq ft plate surface area, pressure 80psi, DURCO by Ascension Model VH. (Y0433)
FILTER -reverse osmosis, LAPIERRE TURBO 2000, mfg rated for 250 gallons per hour on maple syrup. (Y1146)

G -  Grader,Grading Reel

GRADER - also see BEAN GRADER, above.
GRADER- size, vibrating, 22'L x 42"W, SS grader, MS catwalks, 5 grades 2 decks, COMMERCIAL, in stock. (Z7617)

 

H - Heat Exchangers, Homogenizers,  Hoppers, Heaters
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .

HEAT EXCHANGER- plate & frame, (34) 16"W x 60"L plates, MS frame, SS plates, APV, Model R56. (Z6209)
HEAT EXCHANGER- plate & frame, (52) 8"W x 24"L plates, MS frame, 316T plates, TRANTER. (Z6176)
HEAT EXCHANGER- plate & frame, (84) 17"W x 48"L SS plates, MS frame APV Model SR6G-0. (Z6284)
HEAT EXCHANGER- plate & frame, (90) 10"W x 42"L plates, all SS, (2) zone, APV PARAFLOW. (Z6215)

HEAT EXCHANGER- shell & tube, 316 stainless steel, 65' product travel, with low pressure shells, for cooling. (Z8125)

HOPPER, FEEDER- screw, horizontal, 16" dia auger,  5'W x 8'L x 28"D 4,000# cap hopper, STARR, Model 305, painted steel. (Z9873)

HOPPER- sifter, 2'square x 18" deep hopper over static sifter screen, all tubular stainless steel construction. (Z8312)
 
 

I - Inspection Tables / Inspection Conveyors / Trim Lines / Pick Tables
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .
 

INSPECTION TABLE- belt, 6"W x 5'L, all SS, small "trim table" / pick conveyor with plastic Intralox type belt. (Z4885)
INSPECTION TABLE, belt, 18"W x 19'L, all SS, pick and trim conveyor with food grade rubber belt, (6) UHMW cutting board work stations. (Y1077)

INSPECTION TABLE- belt, 36"W x 11'L, all SS, rubber belt, 2.5"H UHMW siderails, w/ or w/o mobilizer. (Y0902)
INSPECTION TABLE- belt, 89"W x 26'L, 5 belts, all SS, grading /coring/ trim line setup w/good prod tkaway, waste tkaway. (Z9646)

INSPECTION TABLE- roller, 4'W x 17.5'L, PVC Rollers, 2.5"dia rolls, SS const, roller inspection conveyor. (Y0612)

L -Labeler, Label Printers
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .

LABELER- pressure sensitive, spot, LABELAIRE, Model 2111-ST, micro processor controls. (Z7038)
LABELER- pressure sensitive, spot, LABELAIRE, Model 2115CD, wipe on labeler, 1000 linear inches/min. (Z7566)
LABELER- pressure sensitive, spot, LABELAIRE, Model 2138 w/Sato thermo printer Mod 8400. (Z7153)

M -Mills, Mixers
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .

MILL- lump breaker, with takeaway conveyor, 36"W x 31"L SS feed pan w/6"H sides, pin delumper w/.5"H nubs, 19"W x 13.5'L conveyor. (Z8683)
MILL- lump breaker, with takeaway conveyor, 36"W x 31"L SS feed pan w/6"H sides, pin delumper w/.5"H nubs, 19"W x 13.5'L conveyor. (Z8637)

MIXER- bar, 25 cu ft, 40"L x 32"W x 39" deep vessel, jacketed, all SS. (Z5313 )
MIXER- bar, 120 cu ft, RIETZ/GRACE, Model 60, all SS. (Z1659 )

MIXER- coating, continuous, all SS, 36"dia x 8'L, solid reel, SS tubular frame, plexiglass shrouds, seasoning drum. (Y0202)

MIXER- dough, double sigma arm, 4 cu ft, AUTO-BAKER, Model Z90-S, MS & SS contacts. (Z8239)

MIXER- paddle, continuous, 15" wide x 12'L trough, SS contacts. (Z6562)
MIXER- paddle, 020 cu ft, LITTLEFORD, plow type paddles, all SS vessel, 32" dia x 42"L cylindrical mixer body, 25 HP drive. ( Z5266 )
MIXER- paddle, 100 cu ft, OHARA, Model 5000, SS contacts, 55"W x 8'L x 36"D, twin 8" dia shafts, SS covers, steam injection. (Z9031)
MIXER- paddle, 100 cu ft, OHARA, Model 5000, SS contacts, 55"W x 8'L x 36"D, twin 8" dia shafts, SS covers, steam injection. (Z9032)

MIXER- ribbon, single, 20 cu ft / 150 gallon, all SS, 26" x 72" x 30"D vessel w/(3) 3" Triclamp outlets, 5HP, A & M PROCESS, Model RB200. (Y0861)
MIXER- ribbon, single, 100 cu ft / 750 gallon, all SS, 36"W x 168"L x 33"D, 3"W x 1/4" thick ribbon on .5" spindles on 3.5" ctr shaft. (Y0304)
MIXER- ribbon, twin single, 54 cu ft (3000 lb), large end-bottom discharge doors, 2 x 20HP drives, all SS, RIETZ, Model RS-28K-5405. (Z7955)
MIXER- ribbon, double, 50 cu ft / 375 gallon, SS w/MS low-pressure JACKET, 33"W x 84"L x 36"D w/6" dia slide-gate discharge, J.H. DAY. (Y0922)
MIXER- ribbon, double, 100 cu ft, all SS, 48" W x 72" L x 53" deep vessel, 6" offset bottom outlet w/butterfly valve. (Z8892)
MIXER- ribbon, double, 100 cu ft, all SS, 48" W x 72" L x 53" deep vessel, 6" offset bottom outlet w/butterfly valve. (Z8893)
MIXER- ribbon, double, 200 cu ft, all SS vessel, 120"L x 60"W x 65" deep vessel, 15" square flanged CBO w/pneumatic slide gate, 50HP. (Z8931)
MIXER- ribbon, double, 200 cu ft, all SS vessel, 120"L x 60"W x 65" deep vessel, 15" square flanged CBO w/pneumatic slide gate, 50HP. (Z8932)
MIXER- ribbon, twin double, 60 cu ft / 450 gallon, 2 x 10HP,  4" dia Tclamp outlets, all SS, A & M PROCESS Model DRB600. (Y0850)
MIXER- ribbon, twin double, 60 cu ft / 450 gallon, 2 x 7.5HP, 3" dia Tclamp outlets, all SS, A & M PROCESS, Model DRB600. (Y0852)
MIXER- ribbon, twin double, 60 cu ft / 450 gallon, 2 x 7.5HP, 3" dia Tclamp outlets, all SS, A & M PROCESS, Model DRB600. (Y0853)
MIXER- ribbon, twin double, 60 cu ft, all SS, A & M PROCESS, Model DRB600. (Y0888)

MIXER- tumble, cone type, 003 cu ft, PATTERSON KELLY, Quad-Cone, SS vessel on painted MS frame. (Z8640)

O -Onion
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .

ONION- peeler, CMI, automatic slitter-scorer, trimmer, blower (section, tipper-tailer w/clamps, all SS. (Y0454)

ONION- slicer, SS & aluminum construction. Ring slicer, accepts onions fm tip/butt cutter Z7735 [below].  (Z7736)

ONION- topper, Tip & butt cutter set to feed Z7736 onion ring slicer [above]. (Z7735)

P -Parts, Palletizer, Pea, Peeler-Washer, Peeler-Batch, Pepper, Pumps
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .

PALLETIZER- case palletizer, semi-auto, MERIDIAN, pallet dispenser, power sweep, power dischg. ( Z2144 )

PARTS- HALLDE, for Model RG400 cutter: 3/32" (2.5 mm) JULIENNE SHREDDER/CUTTER, Mfg. Part #62520. (Z8018)
PARTS- HALLDE, for Model RG400 cutter: 3/16" (4.5 mm) JULIENNE SHREDDER/CUTTER, Mfg. Part #62524. (Z8019)

PASTEURIZER - also see HEAT EXCHANGER under "H" above...

PEELER- batch, 20 lb, 14"dia x 12"D chamber, 6.25"W x 5"H side disch chute w/locking dischg gate.. (Z7587)
PEELER- batch, 33 lb, w/knive peeler disk and abrasive peeler disk, stainless steel, 110 v 1ph. (Y1114)
PEELER- knife, SORMAC Model MS1T, DRY peeling, all SS, mfg rates 2,200-3,300lb/hr. (Z9069)

PEELER/WASHER- 4 roll, SS, belt drive, any combo of (4) abrasive and/or brush rolls, 3 HP, 1,500 - 2,500 lb/hr potatoes, NEW!. (A0001 )
PEELER/WASHER- 4 roll, SS, belt drive, (4) abrasive rolls, 3HP, 1500- 2500 lbs/hr potatoes.  (Y0079)
PEELER/WASHER- 6 roll, SS, direct drive, now has all abrasive, but avail w/any combo abrasive or brush rolls, 3 HP. (Y1074)
PEELER/WASHER- 8 roll, SS, hydraulic, (8) abrasive rolls, MAGNUSON, Model WSP2086. (Z8522)
PEELER/WASHER- 8 roll, SS, 8 rolls, 7 brush & 1 abrasive, 20HP hydr pwr pack, VANMARK, Model 27. (Y0481)

POTATO FORMER, Formit model ProX Profiler for 23mm Parisienne & Chateu Style potatoes, carrots, root crops. (Y0788)

PRESS- plate, BUCHER Model HPL14, lab size, SS contacts. (Z8808)

PRESS- screw, horizontal, 12" dia, SS contacts, 20"x 20"x 16"D feed hopper, VETTER Model DVV21. (Z9037)
PRESS- screw, horizontal, 12" dia, SS contacts, 20"x 20"x 16"D feed hopper, VETTER Model DVV21. (Z9087)
PRESS- screw, horizontal, 12" dia TWIN screw; GAULD / VETTER,  all SS contacts, dual 25HP drives, very good cond! (Z9887)

PROCESS TANK(s) - See TANK- processor... (below)

PULPER- paddle, FMC, Model 50, SS & bronze contacts, bronze paddles, SS screen w/ .060" screen perfs, 10HP. (Z8523)
PULPER- paddle, FMC, Mod 100, SS pulper, 30HP, mfg rated to 20 ton/hr pulper or 100 gal/min as finisher. (Z5543 )

PUMP- centrifugal, size to order, 316T stainless steel, THOMSEN,; we're authorized dealers & WE STOCK NEW Models 5 & 6, and can order built-to-spec.... (DETAILS )
PUMP- centrifugal, 2" inlet /1.5" outlet, TRI-CLOVER Model C218ND 25T-S-15-36, w/15HP motor. ( C0434 )
PUMP- centrifugal, 2" inlet / 2" outlet, T316 SS, flanged connections, DURCO FLOWSERVE, MARK II, size 2K 2x2R-10.  (Y0436)
PUMP- centrifugal, 3" in/ 2" out Triclamp, SS pump, MS base, 5 HP 208/230/460v 3 ph washdown motor. (Z9806)
PUMP- centrifugal, 4" inlet / 3" outlet, T316 SS, brine pump, FLOWSERVE DURCO Mark 3, 10"dia impeller, with or without 125HP motor. (Z9510)
PUMP- centrifugal, 5" inlet / outlet, aluminum w/steel 3 blade impeller, flanged connections, CORNELL, Model 5FF-F5. (Z9954)

PUMP- diaphragm, .5" in/out, PLASTIC, ARO, Model 666053-388, 100 psi, 13 GPM max. (Z7006)

PUMP- food, 4", 6", 8", CORNELL, w/vortex tanks, NEW. We are authorized dealers & can build to spec. (MORE INFO )
PUMP -food, 4" CORNELL, Mod 4NMP-F5K, w/SS vortex tank 24"L x 19"W x 19"D, 5 hp, NEW! ( Z1719 )
PUMP -food, 4" CORNELL, Mod 4NMPP-F5K, w/5HP drive & SS feed tank, expanded volute for gentler product handling, NEW! (Z2796 )
PUMP -food, 6" CORNELL, Mod 6NHP-F16K, w/7.5HP drive & SS surge/balance/vortex feed tank. NEW! (Z1718 )
PUMP- food, 6" CORNELL, Mod 6NHPP-F16K, w/7.5HP drive & SS surge/balance/vortex feed tank, expanded volute for gentler product handling., NEW! (Z2795 )
PUMP- food,  PIPE FLUME DISCHARGE CHUTE to feed a 24"W dewatering shaker, 4" dia pipe flange connection, water recovery screen feed chute, all SS. (Z9993)

PUMP- hydraulic power pack, VICKERS, 260 psi, 10HP, 2'W x 3'L x 18" deep reservoir tank (Z7027)

PUMP- lobe, WAUKESHA, Model 220U2, Universal II Series, 4" in/out, Tclamp, 316 SS contacts, 15HP, SS base. (Y0855)
PUMP- lobe, WAUKESHA, Model 220U2, Universal II Series, 4" in/out, Tclamp, 316 SS contacts, 15HP, SS base. (Y0917)

PUMP- piston / transfer pump, 2.5" in/out, threaded, 4.75" dia piston x 7.5"L stroke, all SS, hydraulic operated, AUTOPROD. ( Z0646)
PUMP- piston / transfer pump, twin piston, MARLEN Model 670 "Vacuumizer" all stainless USDA sanitary for meat & viscous. (Z8690)

PUMP- screw / progressive cavity, 2" Tclamp in/out, MOYNO SSQF4, up to 20gph dep on drive. (Z7065)
PUMP- screw / progressive cavity, 4" Triclamp in/out, MOYNO type 2FF-10H-SSE, on base w/15HP varispeed drive. (Z9343)

PUMP- SINE, Model MR135NNTC, 3" in/out, Tri-clamp, SS, on SS frame w/5HP 3ph drive. (Y0912)
PUMP- SINE, Model MR135NNTC, 3" in/out, Tri-clamp, SS, on SS frame w/5HP 3ph drive. (Y0915)
PUMP- SINE, Model MR135NNTC, 3" in/out, Tri-clamp, SS, on SS frame w/5 HP 3ph drive. (Y0916)
PUMP- SINE, Model MR135NNTC, 3" in/out, Tri-clamp, SS, on SS frame w/5 HP 3ph drive. (Y0928)
PUMP- SINE, Model MR135NNTC, 3" in/out, Tri-clamp, SS contacts, mounted on SS base w/5HP 3ph drive. (Y0944)
PUMP- SINE, Model MR135NNTC, 3" in/out, Tri-clamp, SS contacts, mounted on SS base w/5HP 3ph drive. (Y0945)
PUMP- SINE, Model MR150NNTC, 4" in/out, Tri-clamp, SS, mounted on SS frame w/7.5 HP 3ph drive. (Y0927)
PUMP- SINE, Model MR150NNTC, 4" in/out, Tri-clamp, SS,  mounted on SS base w/7.5 HP 3ph drive. (Y0942)
PUMP- SINE, Model MR150NNTC, 4" in/out, Tri-clamp, SS,  mounted on SS base w/7.5 HP 3ph drive. (Y0943)

PUMP- vacuum, INSERSOLL RAND, size 10 X 5 (10" bore/5" stroke), 7.5 HP. (Z5234)
PUMP- vacuum, INGERSOLL RAND, size 12 X 6 (12" bore/6" stroke), 10 HP. (Z3679 )
PUMP- vacuum, INGERSOLL RAND, size 12 X 6 (12" bore/6" stroke), 10 HP. ( Z4969 )
PUMP- vacuum, REITSCHLE, Model VC200, rotary vane, 5/ 7.5 HP, 3 phase, mfg rated up to 240 cubic meters / 8,475 cubic feet / hour. (Z9668)

R -Retort, Refrigeration
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .
 

RETORT- baskets, horizontal, 45"L x 41"W x 33"D, all MS, Busse style, square/rectangular for horizontal retorts. (Z5533)

RETORT- basket dividers, square, poly, qty (67), 32.5" x 38" w/3/8" perfs on 9/16" centers, NEW. (Z4769)

RETORT- horizontal, 3 basket, 54"dia x 11'L, CMI, single quick opening door, New 1998. (Z7298)
RETORT- horizontal, 4 basket, 45" dia x 12'L, rotary agitation, single quick opening door, 85 psi @ 392 deg F, FMC LogTech controls. (Z9255)
RETORT- horizontal, 5 basket, 60"dia x 18'L, REID / FMC, 30psi, single quick opening door, National Board Coded. (Z9027)
RETORT- horizontal, 5 basket, 60"dia x 18'L, REID / FMC, 30psi, single quick opening door, National Board Coded. (Z9028)

RETORT- vertical, 3 basket, 42" dia x 72" deep, 9 lug, 30 psi, dome top. (Z8717)
RETORT- vertical, 3 basket, 42" dia x 72" deep, 9 lug, 30 psi, dome top. (Z8718)
RETORT- vertical, 3 basket, 42" dia x 72" deep, 9 lug, 30 psi, dome top. (Z8719)
RETORT- vertical, 4 basket, 40" x 96" straight side,  hinged dome lid, 15psi. ( Z5019 )
 
 

S -Scales, Separators, etc...
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .

SCALE- platform type, 10 lb, all SS, DORAN, Model 4100, countertop, over/under, 8" x 10" platform. (Z9498)
SCALE- platform type, 10 lb, all SS, DORAN, Model 4100, countertop, over/under, 8" x 10" platform. (Z9499)
SCALE- platform type, up to 75 lb capacity, all SS, HOBART. ( Z4822 )
SCALE- platform type, bar, up to 900 lbs, HOBART, Model 7214, painted steel, operable condition. (Z7383)

SCALE- linear, 1 lane, LOGICAL MACHINE, Model S-4, bulk & dribble netweigher, SS contacts, foot pedal, NEW. ( Z5538 )
SCALE- linear, 1 lane, POWELL, Model AWCS125, bulk & dribble netweigher, SS contacts, foot pedal. (Z5960)
SCALE- linear, 1 lane, WEIGHPACK, Model AEF-9, 9kg /<>20lb, SS contacts/MS base, now set for foot pedal activation. (Y0737)
SCALE- linear, 2 lane, KELLY-PERRY, Model DUAL-TFA, linear bulk/dribble, 1-48 oz, w/ctrls, unused, lk new. (Z4951 )
SCALE- linear, 2 lane, KEY-PAK, Model NW200, with hopper, in like new condition. (Y0815)
SCALE- linear, 3 lane, WEIGHPACK, Model AEF-1, 1/2oz - 5 lb fills, Multitrix control sys, w/or w/o integrated Fortress drop-thru METAL DETECTOR. (Y0738)

SCALE- radial, 12 head, ran 13.5 oz, WOODMAN, Model CMDR2000N06956-92 COMMANDER 2, smooth SS  contacts. (Z8867)
SCALE- radial, 14 head 5 lb - 10 lb range, ISHIDA, Model CCW-S-215, all SS contacts. (Y0207)
SCALE- radial, 14 head, 14gr-1000gr (.5oz-2lb), YAMATO, Model ADW323R4, New 1988. (Z8492)
SCALE- radial, 14 head, 20gr-3000gr, 1oz-6.6lb, YAMATO Dataweigh ADW-714-MWH, multihead weigher, w/memory buckets, new 2001. (Y0674)

SPRAY COOLER- BELT, 2'W x 12'L, all SS, SS wire belt w/1/4" openings, USDA sanitary  / washdown, MBC Model MA7. (Y0058)
SPRAY COOLER- belt, 3'W x 15'L, all SS, Laporte belt w/1/2"x 1/2"openings, air knife on dischg, VG condition! (Z8946)

 

T - Tanks, Tank Processor, Tray Sealers,
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .

TANK- 7500 gallon, horizontal, 114"dia x 14'8"L, SS interior, MS exterior, insulated, 2" btm end outlet. (Y0272)

TANK- 0200 gallon, vertical, 36" dia x 48" deep, Plastic, flat bottom, no legs, 2" threaded bottom side disch 1.5" from bottom. (Z8917)
TANK- 0300 gallon, vertical, 48" dia x 48" deep, dish bottom, SS contacts, INSULATED, dish btm w/4" CBO, covered w/mixer mount & manway, steel legs. (Y1138)
TANK- 0300 gallon, vertical, 48" dia x 48" deep dish bottom, SS tank, dish btm w/4" CBO, covered w/mixer mount & manway, on steel legs. (Y1139)
TANK- 0300 gallon, vertical, 48" dia x 48" deep dish bottom, SS tank, dish btm w/4" CBO, covered w/agitator slot & manway, on steel legs. (Y1140)
TANK- 0300 gallon, vertical, 48" dia x 48" deep dish bottom, SS tank, dish btm w/4" CBO, covered w/agitator slot & manway, on steel legs. (Y1141)
TANK- 0400 gallon, vertical, 84" dia x 40" deep cone bottom (16"sides/24"conical),  w/side & btm sweep agitator, all SS, CHESTER JENSEN. (Y0901)
TANK- 0500 gallon, vertical, 66" dia x 70"H deep cone bottom, w/side & btm sweep agitator, all SS. (Y0925)
TANK- 0700 gallon, vertical, 60" dia x 68" deep, all SS, dome top, w/sweep agitator, APV. (Y0848)
TANK- 0700 gallon, vertical, 60" dia x 68" deep, all SS, dome top, w/sweep agitator, APV. (Y0849)
TANK- 0700 gallon, vertical, 66" dia x 79" deep cone bottom, w/side & btm sweep agitator, all SS, APV. (Y0893)
TANK- 1600 gallon, vertical, 70" dia x 96" deep, SS tank, shallow cone bottom, SS contacts w/MS bands & legs. (Z9371)
TANK- 1950 gallon, vertical, 76" dia x 96" deep, shallow cone bottom, SS contacts w/MS bands & legs, PERRY. (Z6492)

TANK- dip tank, 18"W x 16'6"L x 9" deep horz trough w/three paddle wheels, PEASE slice and wedge washer, all SS. (Z9632)
TANK- dip tank, 37"W x 41"L x 23" deep, all SS,  w/ LaPorte type SS belt. ( Z4724 )

TANK-  other, HOT BREAK TANK, 200 gal, rotary coil, 10 psi, jacket. ( Z3513 )

TANK- processor, 0300 gallon, vertical, 150 psi jacket, 50" dia x 54" deep w/2.75"dia CBO, dome top, all SS, WALKER. (Z8857)
TANK- processor, 0700 gallon, vertical, 50 psi jacket, 60" dia x 54" deep w/3"threaded CBO, hinged cover, SS tank / MS legs, Willflow. (Y0683)
TANK- processor, 1200 gallon, vertical, 55 psi 2-zone jacket, SINGLE-MOTION side & btm SCRAPER-AGITATOR, cone bottom 3"CBO. (Y0865)

TRAY SEALER, vac/gas, ORICS, VGF-1000, complete system, w/infeed & takeaway conveyors, unused. (Z8285)
 
 

U - URSCHEL slicers dicers slicers shredders cutters Comitrols, unloaders, etc...
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .
 

UNLOADER - truck, potato, vegetable, fruit unloader, Spudnik Model 9999-97, hydraulic driven, with 8' wide scoop. (Z7233)

URSCHEL - We specialize in URSCHEL CUTTING MACHINES! (More URSCHEL info)

URSCHEL- dicer, Model B, SS hopper/chutes/guards, Urschalloy slice shell, for dices, strip cuts, slices. (Y0528)
URSCHEL- dicer, Model G, GA, GK, GKA - CALL for current availability. (See sample )
URSCHEL- dicer, Model G, SS shell, 7" shell opening, MS castings, SS frame, 3/4" crosscut & 1/2" circ, very good condition. (Z9352)
URSCHEL- dicer, Model GK, SS shell, 7" shell opening, SS frame, shrouds, hopper, dischg chute, painted main casting. (Y0711)
URSCHEL- dicer, Model H, SS shell w/large product impeller & hopper for 14" slice shell opening. (Z9426)
URSCHEL- dicer, Model H, SS shell w/large product impeller & hopper for 14" slice shell opening. (Z9429)

URSCHEL- dicer, Model CD, SS contacts, two-dimensional cutter for dices and strip cuts, nuts, clams, & etc. (Y0981)
URSCHEL- dicer, Model HT, SS contacts, for dicing tomatoes & retaining the juice. ( Z4601 )
URSCHEL- dicer, Model L, SS contacts, set 3/8" dice, all  SS, 2HP 3ph. (Z8891)
URSCHEL- dicer, Model RA, SS shell, 9" opening, set for 1/8 dices, 5HP drive. (Y1116)

URSCHEL- slicer, Model 30C length cutter, 1/2" knife slots, MS outer bowl, MS inner bowl, MS fingers, std SS hopper, MS frame. (Z9252)
URSCHEL- slicer, Model W, French style slicer, w/SS centrifugal feeder & oscillating aligning lanes, set 3/16".  (Z9013)
 
 

V - Vibrating Conveyors, Vibrating Screens, Vibrating Shakers/Graders
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .
 

VALVE- pneumatic, 2" REMOTE CONTROLLED SHUTOFF VALVE w/Tri-clamp fittings, SS USDA/3A sanitary, w/Thinktop control top, ALFA-LAVAL. (Y0239)
VALVE- pneumatic, 2" REMOTE CONTROLLED SHUTOFF VALVE w/Tri-clamp fittings, SS USDA/3A sanitary, w/Thinktop control top, ALFA-LAVAL. (Y0240)

VIBRATING CONVEYOR- 18"W x 82"L, all SS, end or side load with one side 8"H / other 4"H, 12"L x 18"W fines screener w/3/16" perfs, KEY ISO FLO Model 435505-1. (Y1129)

VIBRATING SHAKER- FEED CHUTE for/from PIPE FLUME, sized for a 24"W (or wider) dewatering shaker, 4" dia flange (pipe) connection, all SS. (Z9993)
 
 

W - Washers, Water Recovery, Wrappers,
This is only a PARTIAL listing of our stock, CALL 315-589-4511 if you need something we don't show here .
 

WASHER- dip tank, 72"L x 49"W x 22"D tank, all SS, 48"W x 55"L incline discharge conveyor, preservative soak rinse wash. (Y1079)

WASHER- immersion, 21"L x 53"W x 35"D tank, Solbern "Feed Reel", SS, ferris-wheel reel w/11"Lx6"Lx5"D buckets on 12.5"centers. (Y1089)
WASHER- immersion, 144"L x 48"W x 30"D tank, all SS, 24"W Intralox type belt w/2"H cleats on16"ctrs, 7' horz travel in water. (Y0563)
WASHER- immersion, 156"L x 39"W x 29" deep, all SS, air bubbler agitation, ovrhd sprays, paddle wheel dischg, w/filtration reel. (Y1088)
 
WASHER- reel, 29.5" dia x 69"L, all SS, rod reel, 3/16" dia rods, 7/16" sieves, 1HP drive. (Y0935)
WASHER- reel, 30" dia x 68"L, A.K. Robins, SS rod reel, 60"L rod section, SS catch pan, steel frame and shrouds. (Y0867)

WASHER- roller, HAMACHEK, 48"W x 13'L, all SS, overhead sprays, prev used as corn washer. (Z3393)

WATER RECOVERY, destarcher- REKO, Model CYCLOON 300ZA, cyclone type over 47"L x 31"W SS tank, 4" in/out. (Z6629)

WATER RECOVERY- screen, 24"W x 36"L, ALARDSIEVE. sieve size per customer spec, all SS, NEW!( Z3200 )
WATER RECOVERY- screen, 72"W x 50"L, ALARDSIEVE, sieve size per customer spec, all SS, NEW! ( Z5697 )

WASTEWATER- dewatering screw press, all SS, 6"dia x 48"L screw, SWECO Model ISP. (Y1136)

WASTEWATER RECOVERY EQUIPMENT - Click HERE for more info!!!

WRAPPER- shrink, tray, automatic, to 28tpm, ANDERSON, Model 464-2 bundler w/model 480-4 heat shrink tunnel. (Y1128)

WRAPPER- shrink, tunnel only, RBS DESIGN, MS const, 48"L heat tunnel w/24"W x 10"H opening, 20"W x 6'L conveyor. (Y0751)
WRAPPER- shrink, tunnel only, RBS DESIGN, SS const, 48"L heat tunnel w/ 25"W x 10.5"H opening, 6'L x 25"W roller belt thru 48"L tunnel. (Y0913)

Home

Email

Equipment items on our listings page are in alphabetical order (Accumulating thru Wrapper), scroll the listings page until you see what you want,
--OR--
Look for the "alphabet" (see below) and click on the letter of the alphabet to jump to the part of the list you want to see...
 
 

--OR-- click "SEARCH " to use our search feature....
 
 

Each listing has a "reference number" at the far right at the end of the line, the reference number is underlined and in blue, click on that reference number to see a picture and detailed description of the item.