|ALARD EQUIPMENT CORPORATION
6483 Lake Avenue
Williamson, NY 14589 U.S.A.
VIBRATING ONION GRADER /
VIBRATORY ONION RING SEPARATOR ...
Click on picture(s) to enlarge!
*PLEASE NOTE that our PICTURES SHOW the above-described onion ring grading table with OPTIONAL stainless steel
TWO-STATION SEMIAUTOMATIC BAG FILLING SYSTEM, Alard item Y1218 available separately (at extra cost).
SEE BELOW FOR MORE and ask your Alard Sales Representative for current availability...
wide by 8 feet 6 inches long screen area, currently fitted with single
replacable screen with 1.25 inch diameter perforations to grade the
center onion cores out of onion slabs to produce onion rings. The
screen is held in by quick-release clamp-hooks allowing for quick
change to another screen configuration / perforation sides. The screen
deck runs between 2" high stainless steel sides.
Complete with bottom-side air-headers to gently separate the onion slabs into onion rings, with center mounted 21 inch long top-side 1/4 inch perforated screen-hood over the shaker, to keep product / pieces from being blown off the conveyor. Rings go off the end of the screen at the 39.5" working / discharge height. Fines, cores, and small particulates drop through the screen into the vibrating pan and are discharged onto a 10 inch wide by 40" long cross-conveyor takeaway discharging at a right angle perpendicular to the main conveyor, at a 22 inch discharge height.
Fractional horsepower 230/460 volt 3 phase drives for both the vibratory eccentric, and the takeaway belt.
This vibrating onion ring slab separator is IN stock* in GOOD condition, All stainless steel construction.
*PLEASE NOTE that our PICTURES SHOW the above-described
onion ring grading table with OPTIONAL stainless steel TWO-STATION
SEMIAUTOMATIC BAG FILLING SYSTEM, Alard item Y1218 available separately
(at extra cost). SEE BELOW FOR MORE and ask your Alard Sales Representative for current availability...
...STAINLESS STEEL TWO-STATION SEMIAUTOMATIC BAG FILLER / BAG FILLING SYSTEM...
...consisting of a single stainless steel top infeed hopper 24 inches wide (left to right) by 6 inches long (front to back) with a tapering center divider, and two 7 inch wide by 6" long discharge openings with slide gates. Beneath each top hopper discharge is a separate stainless steel bag fill funnels which tapers from 10 inches square at the top to a 6 inch square discharge outlet, each with pneumatic bag holders complete with operator control buttons. The bag fill funnels are positioned over adjustable stainiless steel pneumatic bag support platforms each 10 inches wide by 9 inches long, on 50 lb weigh cells, each with remote digital control /readout panels. The bag holding setup is adjustable for bags up to 17 inches tall.
In stock in good condition, available for timely shipment (shown in picture with vibratory onion grading table NOT included, but available separately).
Alard item reference #:Y1218
stated, volume, speed, and/or capacity estimates given are those of the
manufacturer(s) of the equipment. All offers are subject to prior sales
and owner's confirmations. Unless otherwise specified, any prices shown
do not include skidding, crating, or freight.