A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

May 2012 Archives

z9933

GORING KERR TEK 21 DSP STAINLESS STEEL, DIGITAL, DROP-THROUGH METAL DETECTOR with REJECT DIVERTER / VALVE...

...5" diameter by 24" long plastic drop-thru tube through a stainless steel detection head enclosure with 6" diameter aperture. The drop-thru tube leads to a Goring Kerr model 402 stainless steel pneumatically actuated reject system. 3' drop from infeed to product discharge. 5" square product and reject discharge openings, with reject discharge facing to the right (as perceived by someone standing at the control panel position). Digital operator controls, in gasketed stainless steel control box. Stainless steel power supply enclosure. Head, controls, power supply box, and reject system all mounted on a stainless steel frame. 110 volt single phase electrical input.

Note: The head comes mounted in a stainless steel frame, but the stainless steel angle leg floor stand shown in the pictures is something we use to set these on for display purposes, and is not included unless otherwise negotiated.

In stock in EXCELLENT operational, electrical, mechanical, and cosmetic condition, ready to go and available for immediate shipment.

Alard item reference #:Z9933


y1415

y1415c_email.jpgERIEZ EZ-TEC Model DSP12x10HI, STAINLESS STEEL DIGITAL METAL DETECTOR with 12 inch high by 10 inch wide aperture opening. Food grade stainless steel head enclosure, manufacturer tagged for NEMA 4 IP66 washdown applications in food grade sanitary environments.

Complete with touchscreen operator controls. 110 volt single phase electrical input.

As of this writing, this metal detection system is still in stock, in good condition, available for timely service and shipment.
Alard item reference #:Y1415

y1328

y1328c_email.jpgWAUKESHA Model 60 STAINLESS STEEL POSITIVE DISPLACEMENT LOBE PUMP with 3 HORSEPOWER DRIVE. 2.25 inch diameter inlet and outlet, with Tri-clamp fittings; mounted  on a stainless steel base coupled with a 3HP 208/230/460 volt 3 phase drive.

This food grade Waukesha USDA sanitary stainless steel pump is in stock in good condition available for timely service and shipment.
Alard item reference #:Y1328

y1361

y1361c_email.jpgWAUKESHA Model 60U1 STAINLESS STEEL POSITIVE DISPLACEMENT LOBE PUMP with 2HP DRIVE. 2.5 inch diameter inlet and outlet, with Tri-clamp fittings, mounted in a top-and-bottom inlet/discharge configuration.

The Waukesha U60 is mounted on a stainless steel base coupled to a 2HP 208/230/460 volt 3 phase fixed speed Eurodrive, with a protective dome cover.


This food grade Waukesha USDA sanitary stainless steel pump is in stock in good
condition, available for timely service and shipment.
Alard item reference #:Y1361

y1011

y1011h_email.jpgWAUKESHA Universal 30 STAINLESS STEEL POSITIVE DISPLACEMENT LOBE PUMP with 5HP MOTOR / DRIVE. 1.5 inch diameter inlet and outlet with I-line sanitary connections; mounted on a stainless steel base coupled with a 5HP 208  / 230 / 460 volt 3 phase constant speed drive motor. The food grade Waukesha U30 USDA sanitary stainless steel pump has NEW impellers and seals, and it's inner surfaces are in excellent condition with no scoring.

This positive displacement pump needs very minor cosmetic cleanup, but is otherwise in stock in excellent operational and mechanical condition, available for timely shipment.
Alard item reference #:Y1011

y0870

y0870i_email.jpgWAUKESHA UNIVERSAL 15 JACKETED STAINLESS STEEL POSITIVE DISPLACEMENT LOBE PUMP with 1.5 inch diameter inlet / outlet ports with with Tri-clamp sanitary connections.

This Waukesha U15 pump has a JACKETED PUMP HEAD
for heating or cooling, and is manufacturer rated for approximately 10 gallons per minute. Top drive shaft configuration, with all food grade stainless steel product contact surfaces.

Pump only, no drive included unless otherwise specified.


In stock in excellent operational, mechanical, and cosmetic condition, ready to go and available for timely shipment.
Alard item reference #:Y0870

Y1193

JUST REFURBISHED, and
READY FOR IMMEDIATE SHIPMENT!

y1193g_email.jpgGROEN Model AE1-40 SELF-CONTAINED ELECTRIC-FIRED STAINLESS STEEL 40 GALLON KETTLE. 26" inside diameter x 22" deep hemispherical bottom vessel with hinged top cover, and 1.25" front bottom outlet with valve. 36 inch infeed height, 11.5 inch discharge height from valve. Manufacturer stamped, National Board coded, U-stamped and NSF tagged; 30 psi @ 300 degrees Fahrenheit.

Thermostatically controlled electric heat; 208/230 volt 3 phase electrical input.

In stock in EXCELLENT operational, electrical, mechanical and cosmetic condition, ready to go and available for immediate shipment.

Alard item reference #:Y1193

y0863

JUST REFURBISHED, and
READY FOR IMMEDIATE SHIPMENT!


y0863h_email.jpgCINTEX SENTRY STAINLESS STEEL DIGITAL METAL DETECTOR w/ THROUGH CONVEYOR.

3.25" high by 8.5" wide usable aperture dimension in an all stainless steel search head enclosure with digital touch screen operator controls. The search head is mounted on and integrated with a 8" wide by 52" long stainless steel thru-conveyor, with a food grade rubber belt running in a left to right product flow (from the perspective of the control position), at a 38" working height on height-adjustable legs.

Complete with BELT-STOP-ALARM REJECT system. 110 volt single phase (standard household current) electrcial input for both the search head and conveyor drive.

In stock in EXCELLENT operational, electrical, mechanical, and cosmetic condition, ready to go and available for immediate shipment.

Alard item reference #:Y0863

y1272



ASEECO Model ALS-0-15CP Z-shaped BUCKET ELEVATOR CONVEYOR, with 7 foot long horizontal infeed section at a 21" infeed height, a 9.5 foot vertical rise, and a 5 foot horizontal (top) discharge section at a 10 foot 4 inch discharge height.

White plastic buckets 4.5 inches long (front to back) by 15 inches wide by 2.5 inches deep.

Painted steel frame, previously used in a  dry bakery application. Currently fitted with a 575 volt 3 phase drive (motor could be rewound to US voltage or run via a transformer), otherwise this elevating bucket / feed conveyor is IN stock in EXCELLENT operational, mechanical, and cosmetic condition, ready to go and available for immediate shipment.
Alard item reference #:Y1272

y1307

y1307_email.jpgWATSON MARLOW MASOSINE Model SPS025-NNTC STAINLESS STEEL POSITIVE DISPLACEMENT SINE PUMP with 1HP drive. 2.5 inch inlet / outlet ports with Tri-clamp connections. This food grade sanitary stainless steel Sine pump is mounted on a stainless steel based coupled to a 1 HP 110/220 volt single phase mechanical VARIABLE SPEED DRIVE geared for and adjustable for 40 to 275 RPM.

Manufacturer rates this model pump for USDA sanitary food grade applications, up to  15 gallons per minute at 275 RPM, up to 150 psi pressure, temperature up to 250 degrees Fahrenheit, and as able to pass particulate sizes up to .87 inch.

In stock complete and in EXCELLENT operational, mechanical, electrical and cosmetic condition, ready to go and available for immediate shipment.
Alard item reference #:Y1307

y1340

y1340i_email.jpgKEY ISO-FLO stainless steel VIBRATING CONVEYOR / VIBRATORY FEEDER, 12 inches wide by 14 feet long with a solid flat bottom pan with 5 inch high sides.

The all stainless steel vibratory
conveyor sits on a stainless steel base with isolation spring mounts (can be set on legs or suspended from a ceiling), complete with 1HP 208/230/460 volt 3 phase vibrator drive. All food grade stainless steel construction. Key Iso-Flo model 4305501.

Lexan covers shown in pictures were a home-hewn add on by the prior owner, and we'd remove them if / when we service this piece.

IN stock in good condition, available for timely shipment.

Alard item reference  #:Y1340

y1327

y1327_email.jpgOLNEY STAINLESS STEEL VIBRATING DEWATERING SHAKER / VIBRATORY GRADER.

26.5 inches wide by 87.5 inches long, consisting of an 18 inch long solid infeed
  section leading to a to 65.5 inch long screen section with side walls over the screen edges narrowing the usable screen width to 24 inches. Straight-through discharge section tapered in 5 inches on either side for an 18 inch discharge width, with a 4 inch long bottom chute declining 3 inches.

This shaker-grader-scavenger screen comes with a rod bed screen covered with a fine stainless steel mesh. Beneath the fine mesh, the rod bed has 1/8" rods running perpendicular to the product flow, with 1/8" long by 4.5" wide openings.

36 inch infeed height, 28 inch discharge height, with 3.5 inch high stainless steel sides around the screen bed, with quick-release screen clamps for fast screen changeover. Beneath the shaker bed is a tapered underside stainless steel dewatering / fines collection pan with a 6 inch center bottom outlet tapered down to 4".

All food grade stainle
ss steel construction including 2"x 4" tubular support frame. 1 HP 230/460 volt 3 phase belt drive with Ajax eccentric.

In stock in good solid condition, available for timely shipment.

Alard item reference #:Y1327

y1330

y1330f_email.jpgGORING KERR MODEL TEK-21 METAL DETECTOR with STAINLESS STEEL BELT-CONVEYOR, 4.25" high by 20" wide usable aperture opening in the epoxy painted aluminum search head enclosure.

The metal detection head is mounted on a Schneider stainless steel CONVEYOR with a 7.75" wide by 48" long conveyor belt, running at a 55" working height on adjustable feet. Right to left product flow. Currently configured for a compressed-air blow-off reject with compressed air tank, but can be easily converted to a belt-stop-alarm or push-off reject. Conveyor geared for approximately 210 fpm belt speed.

110 volt single phase (standard household current) electrical inputs for both the head and conveyor drive.

In stock in good operational condition and available for timely shipment.
Alard item reference Y1330

y1024

y1024c_email.jpgLomax Model SBA300, 300 GALLON STAINLESS STEEL VERTICAL TANK, 44 inch diameter by 46 inch deep straight sided dish bottom single wall vessel with 2.25" center bottom outlet with Triclamp discharge fitting. 2.75 inch side (near top) stainless steel overflow pipe with Tri-clamp fitting. Two-piece stainless steel removable hinged cover. Food grade stainless steel construction, including stainless steel legs set for 70 inch infeed (top lip) height, 14 inch discharge height.

In stock in good condition, available for immediate shipment.
Alard item reference #:Y1024

y1336

y1336f_email.jpgSTAINLESS STEEL TABLETOP CHAIN CONVEYOR 90 DEGREE CONVEYOR CURVE, LEFT-HAND with  10 inch wide Delrin chain. 24 inch long straight infeed section to left-angle curve, then after the bend, a 30 inch long discharge section. UHMW plastic outside rail only, 3 inches high. With stainless steel legs currently set for a 52" working height.

3/4 HP 208/230/460 volt 3 phase washdown moto
r with gear drive for 380 feet per minute belt speed. 5 foot long by 4 1/2 feet wide by 55 inches overall height as configured.

In stock in good operable condition, available for immediate shipment.

Alard item reference #:Y1336

y1334

y1334a_email.jpgSTAINLESS STEEL TABLETOP CHAIN CONVEYOR 90 DEGREE CONVEYOR CURVE, LEFT-HAND with  10 inch wide Delrin chain. 24 inch long straight infeed section to left-angle curve, then after the bend, a 30 inch long discharge section. UHMW plastic outside rail only, 3 inches high. With stainless steel legs currently set for a 52" working height.

3/4 HP 208/230/460 volt 3 phase washdown motor with gear drive for 380 feet per minute belt speed. 5 foot long by 4 1/2 feet wide by 55 inches overall height as configured.

In stock in good operable condition, available for immediate shipment.

Alard item reference #:Y1334

y0955

y0955_email.jpg250 GALLON SINGLE WALL HEMISPHERICAL BOTTOM STAINLESS STEEL TANK, 52 inch diameter by 42 inch deep round-bottomed vessel with 2-inch center bottom outlet with threaded discharge fitting. ON a stanless steel support frame providing for a 5 inch discharge height.
y0955d_email.jpg
In stock in good condition available for immediate shipment.
Alard item reference #:Y0955

About this Archive

This page is an archive of entries from May 2012 listed from newest to oldest.

April 2012 is the previous archive.

June 2012 is the next archive.

Find recent content on the main index or look in the archives to find all content.


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)