RECENTLY ACQUIRED at Alard Equipment Corp: July 2012 Archives

y1374

By Michael C. Shults, Alard Equipment Corp on July 23, 2012 3:46 PM

STAINLESS STEEL HOT WATER ROTARY BLANCHER, LAB SIZE / PILOT LINE BLANCHER with 20 inch diameter by 65 inch long reel, with spiral screw auger totally enclosed in a perforated screen; --with 1/8" perforations in the outer screen. 6.5 inch square infeed hopper at a 65 inch infeed height, and an 8 inch wide discharge chute at a 48 inch discharge height.

Complete with hinged stainless steel side covers, steam injection sparge, vent port, cleanouts,water ports and drains. All food grade stainless steel product contacts, reel and tank; a stainless steel blancher on a painted steelsupport frame. 1/2 HP US Drive mechanical variable speed drive.

Previous owner reports last run on green peas at 2 tons per hour nominal through
put.

In stock in good condition, available for timely shipment.
Alard item reference #:Y1374

y1458

By Michael C. Shults, Alard Equipment Corp on July 12, 2012 12:20 PM

MAGNUSON Model WSP-2046 STAINLESS STEEL HYDRAULICALLY POWERED 4 ROLL PEELER / BRUSH-WASHER.

12" by 18" flared infeed hopper leads to peeling chamber currently fitted with (4) stiff brush rolls; --but can be used with any combination of abrasive and/or brush rolls. Water spray bar over peeling / scrubber rolls to lubricate product and wash away peels and debris, which drop to a stainless steel water & peel catch pan with 8.5" center bottom outlet beneath. At the end of the peeling chamber, an adjustable product discharge gate regulates product retention time. Food grade stainless steel body and frame construction, including hinged cover. 64 inch infeed height, with 44 inch discharge height on height-adjustable feet. Hydraulically driven with an onboard hydraulic power pack, with variable speed control.

As of this writing, this continuous peeling machine is in stock in VERY GOOD CONDITION and available for timely shipment.
Alard item referenced #: Y1458

y1337

By Michael C. Shults, Alard Equipment Corp on July 3, 2012 2:55 PM

GORING KERR MODEL TEK-21 METAL DETECTOR with STAINLESS STEEL Z-shaped "GOOSE-NECK" ELEVATING BELT-CONVEYOR.

(Also see video below)...

3.25 inch high by 7 and 7/8 inch wide usable aperture opening in the epoxy painted aluminum search head enclosure. Z-shaped / goose-neck Schneider stainless steel ELEVATING CONVEYOR with a 8 inch wide by 44 inch long cleated interlocking plastic chain type belt, wiht a 16 inch long horizontal infeed section, a 44 inch long incline section, and a 28 inch long horizontal discharge section. 15" infeed height, 45 inch discharge height on adjustable-height
mounted casters. Right to left product flow from the control panel position.

Configured with a compressed-air blow-off reject system, which could be easily converted to a belt-stop-alarm or push-off reject (as appropriate for product / package characteristics). 110 volt single phase (standard household current) electrical inputs for both the head and conveyor drive.

As of this writing, this food grade industrial metal detection system is in stock in good operational condition and available for timely shipment.

Alard item reference Y1337

y1338

By Michael C. Shults, Alard Equipment Corp on July 3, 2012 2:36 PM

GORING KERR MODEL TEK-21 METAL DETECTOR with STAINLESS STEEL BELT-CONVEYOR.

3 3/8" high by 8" wide usable aperture opening in the epoxy painted aluminum search head enclosure. Schneider stainless steel CONVEYOR with a 6" wide by 46" long conveyor belt, running at a 34" working height on adjustable feet. Left to right product flow.

Configured with a compressed-air blow-off reject system, which could be easily converted to a belt-stop-alarm or push-off reject (as appropriate for product / package characteristics). Conveyor geared for approximately 150 fpm belt speed. 110 volt single phase (standard household current) electrical inputs for both the head and conveyor drive.

As of this writing, this food grade industrial metal detection system is in stock in good operational condition and available for timely shipment.
Alard item reference Y1338

y1297

By Michael C. Shults, Alard Equipment Corp on July 3, 2012 12:10 PM

MAGNUSON Model WSP-2000 STAINLESS STEEL FOUR ROLL ABRASIVE PEELER / BRUSH WASHER/ VEGETABLE SCRUBBER.

Currently configured with (2) abrasive rolls and (2) brush rolls, each approximately 6" diameter by 6' long. Rolls can be changed out to facilitate any combination of abrasive and brush rolls. 23 inch long by 24 inch wide infeed hopper tapers to 15 inch square infeed opening to the peeling chamber. A full-length water spray manifold is mounted over the rolls in the peeling chamber, to provide lubrication and wash peels away through a 12" wide open slot bottom. Belt driven, with 208/230/460 volt 3 horsepower 3 phase motor.

In stock in good, operable condition, available for immediate shipment.
Alard item reference #:Y1297

y1009

By Michael C. Shults, Alard Equipment Corp on July 3, 2012 11:31 AM

SAFELINE POWERPHASE DIGITAL METAL DETECTOR with 11.5 inch high by 5.75 inch wide aperture opening in an epoxy painted aluminum search head enclosure. Complete with side-mounted digital touchpad operator control panel, and separate power supply box. Overall dimensions of 25" wide x 21" high x 12" deep.

As of this writing, this reconditioned Safeline metal detector is IN stock in EXCELLENT operational, electrical, mechanical, and cosmetic condition, available for immediate shipment.
Alard item reference #:Y1009

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

July 2012 Archives

y1374

y1458

y1337

y1338

y1297

y1009

About this Archive

Monthly Archives

Links