A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

September 2012 Archives

y1536

y1536k_email.jpgURSCHEL COMITROL Model 3600 SLANT, 10HP, with 3 inch .210" cutting head, with dog-leg impeller. Other cutting setups are available. Factory electrical panel with safety Interlock system. 8 by 12 inch infeed hopper with safety baffles at a 60 inch infeed height, on a factory tubular stainless steel work table 2 feet wide by 3 feet long by 21.5 inches high. 208/ 230 / 460 volt 3 phase electrical input, with Stearns brakemotor drive.

Manufacturer offers a wide range of cutting parts for particle size reduction from coarse grinds to fine emulsions.

As of this writing, this reconditioned Urschel model 3600 slant Comitrol grinder is in stock refurbished to EXCELLENT operational, mechanical, electrical, and cosmetic condition, ready to go and available for immediate shipment.
Alard item reference #Y1536

y1485

y1485_email.jpgSASIB OXE QUASAR ADHESIVE STAINLESS STEEL PRESSURE SENSITIVE LABELER, 12 station rotary labeling  machine, with 4 labeling heads, complete with 3.5 inch wide by 8 foot 6 inch long through-conveyor with timing-worm infeed, straight-through product flow, counter-clockwise rotation.

All food grade sanitary corrosion-resistant stainless steel surfaces and shrouding,
with plexiglass safety door panels with safety interlock system, and touchscreen control panel.

In stock in very good condition, available for timely shipment.

Alard item reference #:Y1485

y1435


y1435_email.jpgGROEN Model AH-1/40, 40 GALLON GAS FIRED SELF-CONTAINED STAINLESS STEEL KETTLE.

26 inch diameter by 22 inch deep hemispherical bottom steam jacketed stainless s
teel vessel with 3 inch diameter front bottom discharge,  40 inch infeed height. Complete with manual plug valve with Tri-clamp connection on the discharge, hinged top cover, and operator controls with thermostat.

Food grade sanitary stainless steel constru
ction. Manufacturer tagged, National Board coded and NSF tagged for for 30 psi steam jacket pressure. Can be set for natural gas or propane. 110 volt single phase (standard household current) electrical input for control circuit.

As of this writing, this gas heated cooking kettle is in stock in good condition, available for timely shipment.
Alard item reference #:Y1435

y1452

y1452m_email.jpg
ODENBERG 150 LITER MULTIFLASH BATCH STEAM PEELER, with 250 psi STAINLESS STEEL VESSEL.

Includes a 15 inch wide by 13' long cleated elevating belt infeed conveyor with a 36 inch by 36 inch by 26 inch deep infeed hopper at the base, powered by a 1HP 3-phase Eurodrive motor. The feed conveyor delivers product to a top mounted infeed hopper with a pneumatic slide gate, which in turn drops product into the 150 liter 304 type stainless steel flash steam vessel via a pneumatic powered lid. The steam vessel is manufacturer tagged and National Board coded for 250 psi at 500 degrees fareheit. The flash peel vessel discharges to a bottom discharge chute, which feeds to a 12 inch diameter by 9 foot long stainless steel screw / auger elevating discharge conveyor powered by a fractional horsepower Eurodrive.

Complete with wet expansion (blow-off) tank for steam discharge, fractional horsepower 3 phase Eurodrive on vessel pneumatic and stainless steel electrical operator control panels with Allen Bradley SLC 500 PLC controller.  All stainless steel construction include peeling vessel, frame and shrouds. System requires 300 psi steam supply and 85 psi air supply. Operator's manual included.

Due to the nature of this machine (e.g. requires high pressure steam) we cannot test run it here, but it was new in 1998 and used on a limited basis in an R & D facility, and by all appearances it is a beautiful, excellent-condition piece as-is. We encourage you to come here to inspect it and judge for yourself. As of this writing, this stainless steel product contact batch steam peeling system is in stock available for immediate shipment.
Alard item reference #:Y1452


y1450

y1450_email.jpgABCO TWO-STAGE (HEAT & HOLD) BELT STEAM BLANCHER-COOKER, 18 inch wide by 8 foot six inch long (product travel).

All stainless steel with fully insulated enclosure with (5) hinged / gasketed inspection doors on each side and (2) hinged inspection doors on each end. Rotary valve infeed and discharge, with CIP balls and plumbing for sanitation.

Each belt section (heat and hold) is in it's own chamber, with each stainless steel woven wire belt with 2/36 inch by 3/8 inch clear openings, 18 inches wide by 5 feet (60 inches) long overall, mounted in an overlapping configuration (see below). Each (belt) is independently driven.

Beneath the steam cooker / blancher is a full-length bottom pan with a 3 inch diameter bottom discharge at the infeed end, with a Tri-clamp discharge connection. Comes complete with an Allen Bradley Nema4 stainless steel electrical control panel, with A-B Panelview 550 touchpad controller, with A-B
SSC VFD (variable speed) controls.


HEAT STAGE

  • Top infeed hopper/chute with 14 inch wide x 9 inch long infeed opening.
  • Four (4) vane rotary infeed valve.
  • Usable belt length of 48".
  • Under-belt live steam injection headers.
  • Belt runs between 8 inch high sides.
  • Product level sensor with (drive) controller.
  • Product drops 12 inches in passing to HOLD stage.
  • Plumbing and Taylor steam controller intact.

HOLD STAGE

  • 54 inch long usable (product-exposed) belt length.
  • Product level indicator.
  • Belt runs between 14-inch high sides.
  • Four (4) vane rotary discharge valve.
  • 9.5 inch by 27.5 inch bottom discharge opening @ 36" discharge height.

OVERALL DIMENSIONS

  • 52 inch overall width
  • 142 inch overall length
  • 89 inch overall height.

As of this writing, this ABCO STEAM BLANCHER is in stock in EXCELLENT/ LIKE NEW condition, available for immediate shipment.
Alard item reference #:Y1450

y1117

y1117c_email.jpg
WASTEWATER RECLAIM REEL / SCAVENGER REEL, 18 inch diameter by 34 inches long with 1/16 inch (1.5mm) perforations, with an internal spiral to auger solids to an end discharge. The water recovery drum is covered by a stainless steel top shroud, and is mounted over a stainless steel water catch tank measuring 47 inches wide by 60 inches long x 42 inches deep; --this tank sits on stainless steel legs. Numerous inlet/discharge ports in the water tank include a 5 inch diamater main discharge port at a 23" discharge height.

The water sieve reel extends beyond the edge of the water catch tank so that solids separation is achieved by removing the solids from the water flow, augering them to discharge next to the tank, while the process water is reclaimed and returned to the flow.

All stainless steel construction.

Comes complete with a 5 HP 3 phase drive motor.

In stock in good condition, available for timely shipment.
Alard item reference #:Y1117

y1304

y1304_email.jpgBUCKET ELEVATOR / BUCKET ELEVATING CONVEYOR, Aseeco Model ALS-76P, STAINLESS STEEL bucket feeder, with plastic buckets measuring 4 inch long by 6 inch wide by 2.5" deep.

Z-shaped / gooseneck configuration, with a 5 foot long horizontal infeed section, an 11 foot 3 inch vertical incline, and a 42 inch long horizontal discharge section. 19 inch infeed height, 12 foot 10" discharge height.

Food grade tubular stainless steel frame construction, currently configured with a top-mounted single phase drive.

As of this writing, this bucket feed conveyor is in stock (still disassembled from shipping) in good condition, available for timely shipment.
Alard item reference #:Y1304

y1488

y1488b_email.jpg
Acrison Model 105X METERING AUGER, STAINLESS STEEL DRY SOLIDS VOLUMETRIC FEEDER with dissimilar speed couble concentric auger metering mechanism, variable speed drive, and three sets of change parts (see below).

12" x 18" x 20" deep product infeed hopper leads to a 9" x 13" x 9" deep U-trough feed chamber with a conditioning sweep-auger surrounding the main feed spiral. This specially designed double concentric "intromitter" type pre-auger contiuously even-feeds and meters incoming product to the smaller (main) metering auger.

Includes four (4) bolt-on feed tubes and spirals for...

  •   1.0  inch diameter by 13.5 inches long.
  •   1.5  inch diameter by 13.5 inches long.
  •   1.75 inch diameter by 15.5 inches long.
  •   3.50 inch diameter by 36 inches long.

A food grade all stainless steel dry solids feeder, mounted on a painted steel base plate on a tubular stainless steel stand, on casters, currently configured for an 87 inch infeed height and a 60 inch (5 foot) discharge height.

Complete with an Acrison control panel with variable speed control, feed rate indicator, and a single motor runs both the sweep-feed auger and the main metering auger.

This volumetric feeder is in stock in very good condition, available for timely shipment.
Alard item reference #:Y1488

About this Archive

This page is an archive of entries from September 2012 listed from newest to oldest.

August 2012 is the previous archive.

October 2012 is the next archive.

Find recent content on the main index or look in the archives to find all content.


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)