A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

October 2012 Archives

y1609

y1609a.jpgELECTRIC STEAM BOILER, 4 HP, 100psi, Electro-Steam Model LB Series 40 electric powered automatic package steam boiler system, including controls valves, regulators; --requires only city water,electric line service, and drain line connections. Operates with
single on/off switch.


SEE VIDEO BELOW!

The LB-40 is manufacturer rated for  40 Kw, 138 lbs/hr steam (using 212 degree Fahrenheit feed water, figure roughly 110 lb/hr with ambient water), 133,900 BTU output. 230 volt 3 phase 112 amp electrical input (boiler), 1/3 HP 110 volt single phase 8.5 amp water feed pump.

ASME compliant, UL certified, CRN (Canadian), and National Board coded.

As of this writing, this electric steam boiler is in stock EXCELLENT operational and mechanical condition, ready to go and available for immediate shipment.
SEE VIDEO BELOW!
Alard item Reference #:Y1609

 

y1646


y1646_email.jpgLIBERTY LSG202M OMNIVORE SUBMERSIBLE GRINDER PUMP, 2HP,  with 1.25 inch top  side (horizontal) outlet with female threaded (NPT) and flanged connection.

An open volute centrifugal pump / sewage pump, submersible, with a hardened stainless steel cutter on the bottom inlet for shearing solids into small particles prior to being passed through the stainless steel impeller. Manufacturer rated as specially designed for more than 300,000 cuts per minute to shred solids including jeans, shop rags, diapers, sanitary napkins, and other difficult materials into a fine slurry.

Heavy duty 2HP oil-filled thermally protected 220 volt single phase 15 amp motor, with internal capacitors (does not require a separate control panel), and quick-connect power cord. 10 inch diameter by 20 inch high pump dimensions, 85 lb net weight.

The Omnivore LSG202M pump is a "manual" model, meaning it is turned on and off manually / externally, and does not include a float sensor for automatic activation.

As of this writing, this Liberty LSG200-series pump is in stock in EXCELLENT operational, mechanical, electrical, and cosmetic condition, ready to go and available for immediate shipment.
Alard item reference Y1646

y0847

y0847_email.jpgNORMAN 200 GALLON LIQUIFIER, 20HP, stainless steel, single wall, square body.

42 inch by 42 inch by 26 inch deep vessel, with 2 inch diameter bottom side outlet, with Tri-clamp connection at a 31 inch discharge height. 31 inch by 31 inch square top manway with safety/pour grid and hinged cover. CIP coil. 20 HP 3 phase belt drive motor.

As of this writing, this high-shear liquid emulsifier Likwifier is in stock in good condition, available for timely shipment.
Alard item reference #:Y0847

y0006

y0006a_email.jpgTHOMSEN SANITARY CENTRIFUGAL PUMP, Model 6. 316T food grade 3A sanitary stainless steel centrifugal pump with 5 7/8" impeller, 2" (inner) diameter inlet / 1.5" (inner) diameter outlet, each with Tri-clamp fittings, and internal BUNA seals. 5/8" diameter drive shaft for 56C frame motor (motor not included, though available at extra cost).

Manufacturer rated for 120 gallons per minute at 30' of head with a 1,750 RPM motor, or 250 gallons per minute at 100'of head with a 3,450 RPM motor  - see mfg pump curves for specifics such as HP requirements.


As of this writing, we have this T316 sanitary food grade stainless steel pump IN stock NEW, and available for immediate shipment.

PUMP ONLY (unless specifically quoted with motor).
Alard item reference #:Y0006

y1320

y1320c_email.jpg300 GALLON COVERED STAINLESS STEEL TANK.

Heavily built 48" diameter by 48" deep dish bottom vessel with 4" center bottom outlet with flange connection. Heavy bolted-on stainless steel top cover with a 16 inch manway, various inlets, clamp mixer mount and agitator slot.

A stainless
steel single wall vertical covered tank, on a three leg steel frame painted with "steel-it" metallic paint.

As of this writing, this vertical single-wall food grade stainless steel mix tank is in stock in VERY good condition, available for immediate shipment.
Alard item reference #:Y1320

y1434

y1434b_email.jpgKUSEL MAGNETIC CAN PALLETIZER, SINGLE HIGH, with 42 inch by 50 inch magnetic head on a swiveling mast. Complete with 48 inch wide by 7 foot 6 inch long can accumulation conveyor with metal slatted belt and grid forming rails. Includes 42 inch wide by 9 foot long powered pallet conveyor, and 208/230/460 volt 3 phase hydraulic power pack, with pump and reservoir.

Previously used as a palletizer for bright-stacked bright cans in a bright-stacking can line.


In stock in good condition, available for timely shipment.
Alard item reference #:Y1434

z8502

z8502_email.jpgCENTRIFUGAL PUMP, 2 inch inlet and 1.5 inch outlet, with motor-drive.

Steel body pump with threaded inlet and outlet connections. Pump direct coupled to a 3 phase motor (approximately7.5 HP), on a stainless steel base frame.

As of this writing, this centrifugal pump is in stock, in operational condition,available for timely shipment.

Alard item reference #:Z8502

y1441

y1441_y1440b_email.jpgELECTRIC STEAM BOILER, 7.5 HP, 100psi Electro-Steam Model LB Series 80 electric powered automatic package steam boiler system, including controls valves, regulators; --requires only city water,electric line service, and drain line connections. Operates with single on/off switch.

The LB-80 is manufacturer rated for  75 Kw, 258 lbs/hr steam (using 212 degree
Fahrenheit feed water, figure roughly 210 lb/hr with ambient water), 251,250 BTU output. 230 volt 3 phase 189 amp electrical input. ASME compliant, UL certified, and National Board coded.

NEW - call for current availability.
Alard item Reference #:Y1441

y1492

y1492i_email.jpg60 GALLON STAINLESS STEEL STEAM JACKETED KETTLE with INCLINED SCRAPER AGITATOR, GROEN Model INA/2-60.

30" diamter by 30" deep hemispherical bottom T316 stainless  steel vessel with 3" center bottom outlet complete with Cherry Burrell air actuated valve.

Stainless steel steam jacket manufacturer tagged and National Board coded for 100psi. Inclined single motion scrape-surface agitation with mechanical  1HP 230/460 volt 3 phase Eurodrive variable speed drive on a stainless steel mount.

Complete with split top covers, temperature probe port, on-off control switch for drive. 56" infeed height on a stainless steel tripod frame with casters.

Previously used as a pasta cooker kettle, this kettle shipped from the factory with bottom direct injection ports around the discharge, which can be used to inject live steam directly into the kettle to boil water, and/or to inject cooling water to rapidly cool the pasta prior to discharge.

As of this writing, this Groen 60 gallon steam jacketed kettle just recently arrived into stock and has not yet been test run, but appears to be in excellent condition, and is thus available for timely shipment.
Alard item reference #:Y1492

y1479

y1479a_email.jpgBELL & GOSSETT SHELL & TUBE HEAT EXCHANGER / HOT WATER SET.

  • 6 inch diameter by 36 inch long shell with .75 inch diameter tubes in a two pass configuration.

  • Manufacturer tagged, U-stamped and National Board coded for a temperature range from -20 to 375 degrees Fahrenheit at 150psi, for both the shell side and tube side.

  • Cast iron head, copper tubes. Complete with a 2HP centrifigual pump, all on a painted steel frame on casters. Includes miscellaneous steam valves, gauges, etc.

As of this writing, this In stock in good condition, available for immediate shipment.
Alard item reference #:Y1479

y1273

y1273_email.jpgGORING KERR Model TEK 21 DSP DIGITAL METAL DETECTOR with CONVEYOR BELT, configured for PULL-BACK REJECT. 2 inch high by 54" wide usable aperture opening in the  epoxy painted aluminum search head enclosure.

50 inch wide by 94 inch long stain
less steel and aluminum CONVEYOR, with food grade rubber belt running on a Micarda bed. Pneumatic "Pull back" reject system with stainless steel deflector plate.

32.5" (conveyor belt) working height on adjustable feet. .75HP 230/460 volt 3 p
hase drive.

As of this writing, this metal detection system is in stock in good operational,
electrical, and mechanical condiiton, available for timely shipment.
Alard item reference #:Y1273

y1596

y1596d_email.jpgGROEN model TDB/6-10 SELF-CONTAINED ELECTRIC-FIRED TILT-DISCHARGE STAINLESS STEEL 2.5 GALLON KETTLE.

12 inch diameter by 9 inch deep hemispherical bottom stainless steel vessel, with a manual tilt-to-dump pouring-lip discharge, at a 34 inch infeed height on a tubular stainless steel floor-stand. Complete with an all stainless steel two-piece roll-away dump table / catch pan / cleanout basin on casters.

Complete with thermostatic operator control and steam-jacket-water-level sight glass. 220 volt single phase electrical input.

Manufacturer tagged, U-stamped and national Board coded for 50psi jacket pressure, with a rated temperature range from 32 degrees to 300 degrees Fahrenheit.

As of this writing, this LIKE NEW electric-heated 10 quart (two and a half gallon) jacketed cooking and cooling KETTLE is in stock, in EXCELLENT operational, electrical, mechanical, and cosmetic condition, ready to go and available for immediate shipment.
Alard item reference #:Y1596

y1597

y1597d_email.jpgGROEN model TDB/7-20 SELF-CONTAINED ELECTRIC FIRED TILT-DISCHARGE STAINLESS STEEL 5 GALLON KETTLE.

14 inch diameter by 11 inch deep hemispherical bottom stainle
ss steel vessel, with a manual tilt-to-dump pouring-lip discharge, on an all stainless steel shrouded base. Tabletop configuration, with a 20 inch infeed height. Complete with thermostatic operator control, and steam-jacket-water-level sight glass. 220 volt single phase electrical input.

Manufacturer tagged, U-stamped and National Board coded for 50psi jacket pressure, with a temperature range from 32 degrees Fahrenheit to 300 degrees Fahrenheit.

As of this writing, this electrically-heated five-gallon (20 quart) steam jacketed cooking and cooling KETTLE is IN stock in good operational condition, available for timely shipment.

Alard item refrence #: Y1597

y1598

y1598d_email.jpgGROEN Model TDB/7-40 SELF-CONTAINED ELECTRIC-FIRED TILT-DISCHARGE STAINLESS STEEL 10 GALLON COOKING KETTLE.

16.5 inch diameter by 14 inch deep hemispherical bot
tom stainless steel vessel, with a manual tilt-to-dump pouring-lip discharge, on an all stainless steel shrouded base. Tabletop configuration, with a 23 inch infeed height.

Complete with thermostatic operator control, and jacket-water-level s
ight glass. 208/230 volt 3 phase electrical input.

Manufacturer tagged, National Board coded and U-stamped for 50psi steam jacket pressure.

As of this writing, this electrically-heated ten-gallon (40 quart) KETTLE is IN stock in go
od operational condition, available for timely shipment.
Alard item reference #:Y1598

About this Archive

This page is an archive of entries from October 2012 listed from newest to oldest.

September 2012 is the previous archive.

November 2012 is the next archive.

Find recent content on the main index or look in the archives to find all content.


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)