A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

November 2012 Archives

y1399

y1399b_email.jpgT316 STAINLESS STEEL DIAPHRAGM PUMP, Wilden Model M8 Food Pump, with 2 inch diameter inlet and outlet, with female threaded connections. Pneumatically powered.

Manufacturer data indicates "180 grit finish", and rates this model for throughput capacity up to a maximum of 150gpm, 1/4" solid particle size, and product temperature up to 220 degrees Fahrenheit. Pump curve available upon request.

As of this writing, this food grade diaphragm pump is in stock in good operational condition, available for immediate shipment.
Alard item reference #:Y1399

y1270

y1270m_email.jpgLEE STAINLESS STEEL VERTICAL RETORT, with racks for pouches, 18 inch diameter by 35 inch deep bottom-jacketed vessel with 6 lug hinged dome cover, and dish bottom. Manufacturer tagged, and UM stamped for 30psi internal working pressure, and 50psi steam jacket pressure. Hinged top cover with temperature gauge, pop-off valve and (6) lug bolts. 1.5" diameter threaded center bottom vessel outlet.

Complete with (2) removable stainless steel racks. One rack has 10 removable trays measuring measure 16" diameter with 1.5" high sides and 1/8" bottom perforations. The second rack has 8 trays.

Gasketed along top vessel flange. 53" infeed height on painted steel legs.

Previously used to sterilize pouches, but is a good size for use as a lab retort for cans or jars (with suitable racking).

As of this writing, this small stainless steel autoclave is in stock in VERY GOOD to excellent condition, available for timely shipment.
Alard item reference #:Y1270

y1632

y1632b_email.jpgNEW LOCK MET 30+ UNIVERSAL TRIPLE-FREQUENCY STAINLESS STEEL DIGITAL METAL DETECTOR with THROUGH-CONVEYOR...

8.5 inch high by 19.75 wide usable aperture opening in the Lock Model Met30+IP65-3F all stainless steel search head enclosure, mounted on a 6 foot long by 18 inch wide stainless steel conveyor. The through-conveyor features an interlocking  plastic chain type belt running over an anti-static bed, and beneath 4.5 inch high adjustable anti-static guide rails.

Working height is 34 inches, with the tubular stainless steel conveyor frame on + / - 2 inches thraded rod feet. The metal detector and conveyor are integrated with a belt-stop alarm reject system with a beacon. The product flow runs from left to right from the perspective of the operator controls position. 1/3 HP motor, 110 volt (standard household current) single phase electrical input.

NEMA4 / IP65 sealed search head enclosure with digital operator controls with 100 product presets, and switchable among three-frequency levels (low frequency, medium, and high), allowing for fine tuning and optimal sensitivity across an exceptionally wide range of products / product types (wet, dry, salty, etc). Sensitivity varies depending on product run, especially where wet, salty, or acidic products that are electrically conductive introduce "product effect" into the equation, however the manufacturer rates dry sensitivity for this head, with no product in the aperture, at a maximum sensitivity of 1.8mm ferrous, 2mm non ferrous, and 2.7mm stainless steel at 300 kHz.

Includes 1 year manufacturer limited warranty.


As of this writing, this metal detection system is in stock NEW, ready to go and available for immediate shipment.
Alard item reference #:Y1632

y1631

y1631a_email.jpgNEW LOCK MET 30+ UNIVERSAL TRIPLE-FREQUENCY Stainless Steel DIGITAL METAL DETECTOR with  THRU-CONVEYOR.

8.5 inch high by 19.75 wide usable aperture opening in the Lock Model Met30+IP65-3F all stainless steel search head enclosure, mounted on a 6 foot long by 18 inch wide stainless steel conveyor. The through-conveyor features an interlocking plastic chain type belt running over a washdown anti-static bed, and beneath 4.5 inch high adjustable anti-static guide rails.

Working height is 34 inches with the tubular stainless steel conveyor frame on +/-  2 inches-height-adjustable threaded rod feet. The metal detector and conveyor are integrated with a belt-stop alarm reject sestem with a beacon. The product flow runs from left to right from the perspective of the operator controls position. 1/2 HP washdown motor. 110 volt (standard household current) single phase electrical input for all components.

Washdown system configuration with NEMA4 / IP65 washdown sealed metal detection head enclosure, washdown conveyor body and washdown motor.

Digital operator controls with 100 product presets, and switchable among three-frequency levels (low frequency, medium, and high), allowing for fine tuning and optimal sensitivity across an exceptionally wide range of  products / product types (wet, dry, salty, etc). Sensitivity varies depending on product run, especially where wet, salty, or acidic products that are electrically conductive introduce "product effect" into the equation, however the manufacturer rates dry sensitivity for this head at 1.8mm ferrous, 2mm non ferrous, and 2.7mm stainless steel at 300 kHz.

This NEW 3-frequency metal detection system includes a 1 year manufacturer limited warranty.

As of this writing, this metal detection system is in stock NEW, ready to go and available for immediate shipment.
Alard item reference #:Y1631

y1567

y1567a_email.jpgSTAINLESS STEEL VERTICAL FORM-FILL-SEAL SYSTEM, consisting of a HAYSSEN ULTIMA SERVO VFFS machine with YAMATO 14 HEAD RADIAL COMBINATION SCALE for wet product; with "fastback" even FEEDER and MEZZANINE.

Yamato Dataweigh model ADW-814-SWH stainless steel 14 station multihead weigher with deeply angled dimpled / rigidized surfaces, manufacturer tagged for 40 to 5,000 grams; --complete with stainless steel ceiling-mount Fastback" vibratory feed conveyor. This scale is mounted on a heavy tubular stainless steel and diamond plate mezzanine, over a Hayssen stainless steel VFFS Model 12-22HR bag former, with (2) forming tubes, and Markum Coder. Both components complete with touch-screen operator controls.

Previously used in a pre-cut produce processing operation, packing freshcut
y1567k_email.jpgbagged salad products. Recently removed from service in good operational condition, and expected to arrive into inventory at Alard shortly.
Alard item reference #:Y1567

y1651

y1651a_email.jpgHOT WATER ROTARY BLANCHER, 4 FOOT DIAMETER BY 8 FOOT LONG REEL, ALL STAINLESS
STEEL USDA FOOD-GRADE SANITARY, with STEAM-JACKETED TANK.

A.K. Robins Model AK48-8-USDA blancher with 48 inch diameter by 96 inch long blancher reel, surrounted by perforated screen with 1/8" diameter screen perforations. Counterweight-balanced hinged gable top with stainless steel CIP spray header, with centrifugal pump. 21 inch long by 14 inch wide open hopper
infeed, paddle wheel discharge.

The blancher tank is surrounded by a MUELLER stainless steel dimpled steam jacket manufacturer tagged and National Board coded for 150 psi, and also has steam injector ports for direct steam injection to heat tank water.

An all stainless steel hot water rotary reel blancher, complete with drive, expected to arrive into Alard inventory shortly, and in very good condition, needing only minor cleanup and service. Details and measurements subject to confirmation upon arrival.
Alard item reference #:Y1651

y1333

y1333p_email.jpgGORING KERR MODEL DSP2 DIGITAL METAL DETECTOR with STAINLESS STEEL THRU-CONVEYOR. 4.75 inch high by 14 inch wide usable aperture opening in an aluminum search head enclosure, with digital controls. The detection head is mounted on a 9.75 inch wide by 58 inch long stainless steel conveyor, with plastic interlocking chain type belt; running in a left to right product flow direction (from the perspective of the control panel) at a 32 inch working height.

This reconditioned metal detection system is integrated with a belt-stop-alarm reject system, with a new PVC control box and buzzer. The detection head has integral  digital operator controls with product presets facilitating fine tuning and quick changeover for multiple products. 110 / 220 volt (standard household current) single phase electrical input for both the detection head and conveyor drive.

As of this writing, this refurbished metal detector with conveyor is in stock in EXCELLENT operational, electrical, mechanical, and cosmetic condition, ready to go, and available for immediate shipment.

Alard item reference: Y1333

About this Archive

This page is an archive of entries from November 2012 listed from newest to oldest.

October 2012 is the previous archive.

December 2012 is the next archive.

Find recent content on the main index or look in the archives to find all content.


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)