A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

August 2013 Archives

y1679

y1679g_email.jpgERIEZ DIGITAL STAINLESS STEEL METAL DETECTOR with NEW STAINLESS STEEL THROUGH-CONVEYOR, 8 7/8 inch high by 25 7/8 inch wide usable aperture opening in stainless steel washdown sealed search head enclosure, with integral digital touch-screen  operator controls. Overall aperture opening is 10 inch high, but the conveyor bed and belt take up an inch (and 1/8) of the aperture height.

The stainless steel washdown-sealed reconditioned metal detector head is mounted on an all NEW stainless steel washdown belt conveyor, with a new 24 inch wide by 6 foot long  interlocking plastic chain type belt, running over a UHMW plastic bed. 33 inch belt working height on 2 inch +/- adjustble feet. This tubular stainless steel frame belt conveyor is complete with a new wash-down gasketed PVC control box with a new 110 volt single phase washdown motor; all integrated with the search head to provide for a belt-stop-alarm reject system.

All stainless steel food grade sanitary washdown configuration. 110 volt single phase (standard household current) electrical input, with stainless steel Nema4 power supply box for the detection head.

As of this writing, this refurbished metal detector / new through-conveyor combination is IN stock in LIKE NEW condition, fully operational, ready to go and available for immediate shipment.

Alard item reference #:Y1679

z9540

z9540a_email.jpgSLICING WHEEL FOR URSCHEL Translicer Model TRS-2500 / TRS-2510; --Urschel assembly number 51203.

22 blade slice wheel assembly manufacturer specified for 1/8 inch (3.2mm), and (with 11 blades) 1/4 inch slices (6.4mm). Series 275 on wheel/belt speed chart.

As of this writing this Translicer cutting wheel assembly is in stock in good condition, fitted with (11) blades, and available for timely shipment.

Alard item reference #:Z9540

z9539

z9539_email.jpgJULIENNE SHREDDING WHEEL FOR URSCHEL Translicer Model TRS-2500 / TRS-2510; --Urschel assembly number 51052.

24 blade slice wheel assembly manufacturer specified for 1 3/8 inch (35mm) by 1.5 inch (38mm) julienne cuts.

As of this writing this Translicer cutting wheel assembly is in stock needing new blades, but otherwise in good condition and available for timely shipment.

Alard item reference #:Z9539

z9538

z9538b_email.jpgSLICING WHEEL FOR URSCHEL Translicer Model TRS-2500 / TRS-2510; --Urschel assembly number 51203.

22 blade slice wheel assembly manufacturer specified for 1/8 inch (3.2mm), and (with 11 blades) 1/4 inch slices (6.4mm). Series 275 on wheel/belt speed chart.

AS CURRENTLY CONFIGURED this translicer cutting head is set with (11) standard flat blades interspersed (every other blade) with (11) julienne blades (Urschel part number 51211 - 3 inch by 2 7/8 inch tab).

As of this writing this Translicer cutting wheel assembly is in stock in good condition, available for timely shipment.

Alard item reference #:Z9538

z9537

z9537_email.jpgSLICING WHEEL FOR URSCHEL TRANSLICER MODEL TRS-2500 / TRS-2510; --Urschel part number 51046.

24 blade slice wheel assembly manufacturer primarily specified for 1/16 inch (.8mm) slices; with additional capability (by selectively removing blades and/or varying wheel/belt speed) for 1/8 inch (3.2mm), 3/16 inch (4.8mm), 1/4 inch (6.4mm), 3/8 inch (9.5mm), and 1/2 inch (12/7mm) slices.

As of this writing this Translicer cutting wheel assembly is in stock in good condition, available for timely shipment.

Alard item reference #:Z9537

z9536

z9536_email.jpgSLICING WHEEL FOR URSCHEL Translicer Model TRS-2500 / TRS-2510; --Urschel assembly number 51203.

22 blade slice wheel assembly manufacturer specified for 1/8 inch (3.2mm), and (with 11 blades) 1/4 inch slices (6.4mm). Series 275 on wheel/belt speed chart.

As of this writing this Translicer cutting wheel assembly is in stock in good condition, available for timely shipment.

Alard item reference #:Z9536

y1667

y1667g_email.jpgTWIN SHAFT RIBBON BLENDER, STAINLESS STEEL, approximately 30 cubic foot capacity.

37 inch wide by 60 inch long by 27 inch deep mixer vessel, with (2) 7 inch by 11  inch bottom end pneumatically operated discharge gates. Agitator ribbons are 1/2" thick by 1.5 inch wide, and run outside 2.5 inch diameter shafts.
y1667c_email.jpg
Complete with hinged top dumping grid, and (2) 3HP 208/230/460 volt 3 phase drive motors.


As of this writing, this twin ribbon mixer is in stock in good condition, available for timely shipment.

Alard item reference #:Y1667

y1846

y1846b_email.jpgSTEAM JACKETED PADDLE BLENDER, TWIN SHAFT, STAINLESS STEEL, with end bottom outlets; Rietz Model RS15-K5603-6.

30 inch wide by 42 inch long by 20 inch deep (approximately 14 cubic foot) vessel manufacturer rated for 500 lb capacity. (2) 7 inch high by 12 inch wide spade shaped pneumatically operated end discharges. The vessel bottom is externally covered with a stainless steel steam jacket manufacturer tagged and National Board coded for 60 psi at 308 degrees Fahrenheit.

Complete with a removable top cover with a 24
y1846k_email.jpg inch square feed hopper which tapers to 12 inch by 24 inch. (2) 3 HP 3 phase 1750 RPM drive motors with gear reduction.

All food grade sanitary stainless steel construction. As of this writing, this 500 lb paddle blender / paddle mixer is in stock in good operational condition, available for timely shipment.

Alard item reference #:Y1846

y1889

y1889a_email.jpgNEW ALARDSIEVE HYDRO-SIEVE TYPE STAINLESS STEEL  WASTE WATER RECLAIM RECOVERY RECYCLING SCREEN, 48 inch wide by 36 inch long (12 square foot) active screen size.

Currently assembled with a .040 inch sieve opening wedgewire screen; other standard sieve size openings run from .010 to .100, as well as special sieve sizes are available to be priced upon request. With the existing .040" sieve screen throughput capacity for this hydro sieve approximately 70 gpm per cubic foot/ or 840 gallons per minute total.

The sieve screen is mounted in stainless steel cabinet withy1889e_email.jpg integral headbox. Water is fed through a 6 inch inlet port with an 11 inch flange connection, and builds in the headbox until it overflows the weir and acclerates down the screen. At the top of the screen is a hinged, swing-up (for cleaning) dispersion baffle to help assure even, laminar water flow. As the solids and liquid travel down the screen surface, liquid is stripped away from the solids, flowing through the sieve screen and back into the catch chamber of the cabinet, where the screened water is discharged from the an 8 inch discharge outlet with a 13.5 inch flange connection, at the bottom back of the cabinet. Solids continue down the screen due to the developed inertia, dropping off the bottom edge of the screen.

This type of water screener is usually mounted such that a bin or tote can be placed beneath the screen to catch the solids for removal (Alard can price a stand, available separately, to your height specification).

The headbox is open and easily cleaned of debris such as stones or other such "heavies" while there are 5.5" cleanout ports on each side of the cabinet to allow access for cleaning behind the screen. There are 1 inch drains with
threaded female connections for washing / rinsing the headbox and recovered water tank.

Static screen / stationary screen water recovery sieve has no moving parts, making it a low cost, low maintenance and long-lived dewatering system.

All NEW T304 stainless steel construction.

As of this writing, this waste water reclaim screen is in stock NEW, ready to go and available for immediate shipment.

Alard item reference #:Y1889

Lock_ADC_display

VIDEO DEMONSTRATION

Tuning and Phasing a LOCK MET 30+ 3 frequency METAL DETECTOR using Lock Inspection Systems graphical display via their ADC software running on a connected PC. This approach shows what contaminant or product effect is causing the reject, allowing for immediate diagnosis of false rejects,QUICK tuning for changing conditions, to minimize downtime and maximize production.


Trouble viewing the video? Click HERE.



y1726

y1726f_email.jpgSANITARY ROTARY PUMP APV R-Series, STAINLESS STEEL POSITIVE DISPLACEMENT LOBE PUMP, with 2 inch sanitary threaded inlet and discharge outlet ports in the side inlet/outlet position basic to the R-series. An APV model 6R6 food grade stainless steel twin lobe pump, configured with (2) 4-lobe stainless steel impellers, mounted on a tubular stainless steel support base with a 3HP 208/230/460 volt 3 phase 1715 RPM drive motor with a 7:1 gearbox ratio. Nominal capacity of 50 gpm.

Manufacturer recommended for applications such as meat processing, where product  characteristics require strip cleaning, so this pump is specifically designed for fast cleanup, where all parts can be removed for cleaning in minutes without removing the pump from the line; while also providing high efficiency and rugged  reliability.

This APV rotary pump is in stock ready to go, in EXCELLENT operational, mechanical, and cosmetic condition, available for immediate shipment.

Alard item reference #:Y1726

y1867

y1867a_email.jpgURSCHEL Model M DICER / STRIP CUTTER / SHREDDER.

A two-dimensinal cutter manufacturer rated for dicing, strip cutting, or shredding a variety of products no more than one inch (25.4mm) in thickness, including bread, beef, pork, poultry or fish, bacon, fruit leather, bread, eggs, pork skins, etc, through a wide temperature range from fresh chilled to hot cooked.

High volume throughput in the tons per hour range depending on product, for example, manufacturer rates for approximately 6,500 lbs per hour cutting "poultry" (i.e. chicken). Manufacturer cutting specifications are identical to the Urschel Model M3 and Urschel Model M6, with cutting parts available in a range of cut sizes, for circular knife cuts from 3/16 to 1.5 inches (4.8mm to 38mm), and crosscut knife cuts from 1/8 inch to 3 inches (3.2mm to 76.2mm). The  manufacturer also offers special special gearing for crosscuts up to 5.66 inches (144mm).

This Urschel M cutter is presently set for 3/4 inch dices, with 3/4 inch crosscut spindle, circular knife spindle, and stripper plate. The existing 1/4 inch feed drum and feed roll accommodate the current 3/4 inch setup, as well as other sizes divisible by 1/4 inch.

y1867h_email.jpg
Included with this cutting machine are additional cutting parts including...

  • 1/4 inch and 1 inch stripper plates.
  • An additional crosscut spindle for 3" cuts.
  • Circular knife spindles for 1/4 inch, 1/2 inch and 1 inch.
9.5 inch wide by 36 inch long infeed belt at a 29.5" infeed height. A factory electrical control panel with safety interlock system controls the 3HP 230/460 volt 3 phase drive.

As of this writing, this strip cutter / shredder / dicer is in stock in good operable condition, and available for immediate shipment as-is.

Alard item reference #:Y1864

y1309

y1309b_email.jpgSTAINLESS STEEL ROLL-THRU GRAVITY TRANSFER CAN WASHER set up with can twists for #10 cans (603 x 700 cans).

5 foot long tunnel with 11 inch wide by  12 inch high twist opening, full length hinged top cover over twist. 1 inch diameter bottom angled side spray pipe with 6 nozzles, 1.5 inch bottom end drain. Cans enter / exit in horizontal rolling position.y1309c_email.jpg All food grade stainless steel.

As of this writing, this empty can rinser / can cleaner is in stock, in good condition, available for immediate shipment.
Alard item reference #:Y1309

About this Archive

This page is an archive of entries from August 2013 listed from newest to oldest.

July 2013 is the previous archive.

September 2013 is the next archive.

Find recent content on the main index or look in the archives to find all content.


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)