A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

April 2014 Archives

y1070

y1070e_crop_email.jpgRECONDITIONED SPIN DRYER, Bock Model FP-90.


Manufacturer rated 130 lb capacity, with a 7.36 cubic foot removable basket which measures 30 inches in diameter by 18" deep; with a 23 inch top opening. Food grade stainless steel construction including base.


Includes operator controls with 10 minute settable timer, safety interlock lid, 5HP 230/460 volt 3 phase motor, and pneumatic brake.


As of this writing, this REFURBISHED BOCK FP90 spinner is in stock in EXCELLENT operational, electrical, mechanical and cosmetic condition, ready to go and available for immediate shipment.


Alard item reference #:Y1070


y1780_y1781

Packrite  Bandrite Model 6000 continuous band
BAG SEALER  with Packrite Conveyormaster BAG CONVEYOR...

y1780_y1781a_crop_email.jpg
Click on picture to enlarge!


Consisting of:

PACKRITE / BANDRITE Model 6000 CONTINUOUS BAND SEALER
,
complete with digital temperature control, variable speed drive (110 volt single phase input). 3/4 inch flat seal width; with left to right product flow. Standard adjustable height steel stand with USDA approved paint. Stainless steel top and side shrouding. Manufacturer rated for up to 550 inches per minute.y1780e_crop_email.jpg


The Model 6000 is designed for food (USDA listed), military, agricultural and many other applications. It seals most types of barrier materials in addition to straight polyethylene up to 12 mil single thickness or 6 mil single thickness on bags with gussets (24 mil total). Change over from one material to another is done with very little or no adjustment required.

The Model 6000 Band Sealer provides a flat seal, or when equipped with the optional crimper it makes a checkered seal impression (it gives a nice cosmetic appearance on clear polypropylene materials). Various seal widths are available.

Maintenance on this machine is designed to be user friendly. Sealing band changecan be made in minutes without tools due to our tilt-away drive system (no tools required band change has been standard at PackRite for more than a decade).   If required, replacement of the temperature controller is snap-in, snap-out, no disconnecting or reconnecting of wiring is necessary.

Additional (NON-included) options available: casters for portability, swivel mount, bag trimmer with or without vacuum, bottom plates, coder (ink or emboss type), Markem coder suitable for up to 3 rows of 1/8" type, crimpers, pressure rollers, bag perforator.

PACKRITE CONVEYORMASTER BELT CONVEYOR, 6 inches wide by 8 feet 8 inches long, with white food grade rubber belt running between adjustable guide rails with nylon coverings. Approximate 31" working height on adjustable feet, running in a left to right product flow configuration.

y1780c_crop_email.jpgPainted mild steel support frame. 110v 1ph DC variable speed, with controls.

Purpose-built to use as a bag conveyor / bag sealer thru-conveyor, with a Packrite 6000 continuous band BAG SEALER.

As of this writing, this combination continuous bag sealer with belt transfer conveyor is available together or separately, IN STOCK NEW at Alard...

Alard item reference #(s): Y1780, Y1781


NOTE: We can also offer NEW made to order, with options, e.g. stainless frames, & etc.

y2188

y2188c_crop_email.jpgWAUKESHA Model 130 POSITIVE DISPLACEMENT LOBE PUMP, WITH DRIVE.

Waukesha Universal 1 series model 130 pump with 3 inch Tri-clamp side inlet and outlet connections. All stainless steel product contacts.

Mounted on a common stainless steel base frame, coupled to a 5HP 208/230/460 volt 3 phase drive.

Unworn smooth interior surfaces including impellers. As of this writing, this Waukesha 3 inch pump is in stock at Alard in EXCELLENT operational, mechanical and cosmetic condition, reaty to go and available for immediate shipment.

Alard item reference #:Y2188

y2197

y2197c_crop_email.jpgROTARY CABBAGE CORING MACHINE, 4-station continuous cabbage corer for sauerkraut, cole slaw, and freshcut processing applications.

Manufacturer rated for up to 28 heads per minute, with manual head placement on a revolving table. All stainless steel product contacts, frame and screen shrouding. Knives available to cut but leave the core (e.g. for sauerkraut), or to remove the core (e.g. for fresh-cut cole-slaw).

1.5HP 208/230/460 volt 3-phase motor (other voltage options available).

As of this writing, this CABBAGE CORER is in stock at Alard in UNUSED / LIKE NEW CONDITION, ready to go and available for immediate shipment.

Alard item reference #: Y2197

y2156

y2156i_crop_email.jpgReconditioned CORNELL 4 inch  EXPANDED VOLUTE FOOD PUMP WITH STAINLESS STEEL VORTEX TANK. Cornell model 4NMPP-F5K 4" diameter inlet/outlet cast iron food pump flange-connected to a new stainless steel tapered vortex infeed tank;  36 inch long by  24 inch wide by 19" deep with 2 inch drain and flanged 4 inch flanged inlet, 4 inch outlet coupled by vibration-isolating flexible hose connection to pump. The  feed tank is surrounded on three sides by 7 inch high stainless steel expanded metal mesh panels (easily removable, but nice).

Cornell's patented "expanded volute" makes for gentler product handling than the "standard volute" model.

Complete with 5 HP 208/230/460 volt 3 phase fixed speed belt and pulley drive with stainless steel belt guard. Pump, tank, and drive all mounted on tubular stainless steel support frames.

Pump manufacturer literature rates this hydro pump and drive combination for approximately 135 gpm at 55 ft head; pump curve data is available for other head and RPM factors.

As of this writing, this refurbished Cornell flume pump configuration is in stock at Alard in excellent operational, mechanical, and cosmetic condition, ready to to and available for immediate shipment

Alard item reference #: Y2156

y1644_video

VIDEO of URSCHEL VSC SLICER-DICER cutting CUCUMBERS into strips.

If you have trouble viewing the VIDEO above, click HERE.

The Urschel VSC slab cutter / segment cutter / strip cutter is manufactuer recommended for cutting carrots, pickles, zucchini, potatoes and other products into segments, slabs, and square or rectangular strips; e.g. pickle spears, potato wedges, etc. Manufacturer rated for maximum product input size of 4 inches in diameter...

As of this post, this Urschel model VSC is in stock at Alard, available for timely shipment. CALL 315-589-4511 for current availability, price, and details...

Alard item reference #: Y1644

y2265

y2265a_email.jpgRECONDITIONED METAL DETECTOR with CONVYEYOR BELT, 6.5 inch high by 19.5" wide usable aperture opening, WASH-DOWN configuration, with DIGITAL controls.

Lock Metalchek 30 CXE, epoxy painted aluminum washdown-sealed search head with integral digital operator controls, mounted on a NEW stainless steel washdown through CONVEYOR with a NEW 16 inch wide by 72 inch long interlocking plastic chain type belt, running over a UHMW antistatic plastic bed. The tubular stainless steel frame belt conveyor is configured with a new washdown gasketed PVC control box with a new 110 volt single phase washdown motor, all integrated with the search head to provide for a horn / stop reject setup.

The conveyor is NEW. The detection head is refurbished. As of this writing, this combined food process metal detection system is in stock at Alard in LIKE NEW operational, electrical, mechanical, and cosmetic condition, available for immediate shipment.

Alard item reference #:Y2265

y2063_video

DICING CUCUMBERS on a ROBOT COUPE Model CL-60D general purpose cutter, our Alard item reference #: Y2063, which is, as of this writing, in stock at Alard, and available in refurbished, ready-to-go condition...

~



If you have trouble viewing the VIDEO above, click HERE.

~

y1562

y1562e_crop_email.jpgSPIN DRYER BASKETS for BOCK FP-90 and/or BOCK FP-95 SPINNERS.

Click on picture to enlarge.

All food grade stainless steel perforated spinner baskets, with side ears for standard Bock lifting yoke.

Quantity (2) available (call for current availability).

As of this writing, in stock in good condition, available for timely shipment.

Alard item reference #:Y1562

About this Archive

This page is an archive of entries from April 2014 listed from newest to oldest.

March 2014 is the previous archive.

May 2014 is the next archive.

Find recent content on the main index or look in the archives to find all content.


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)