A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

October 2015 Archives

y2838

LIQUIFIER, 250 GALLON, STEAM JACKETED 100 psi, Cherry Burrell, all stainless steel, 20 HP...

A Cherry Burrel 250 gallon liquifier, with a 43 inch square by 43 inch deep mixer vessel with 10 inch diameter bottom impeller, and 2 inch bottom outlet with Triclamp connector. Stainless steel steam jacketed / coolant jacketed, manufacturer tagged, U- stamped and national board coded for 100 psi at temperatures from -20 degrees Fahrenheit to 350 degees Fahrenheit.

Closed top with 24 inch diameter manway with hinged y2838d_crop_email.jpg stainless steel cover, with safety grid. Multiple top inlets with Triclamp connections. 66 inch infeed height, 18 inch discharge height on tubular stainless steel frame.

20 HP 208 / 230 / 460 volt 3 phase motor.

As of this writing, this high shear mixer blender, emulsifier, vortex blender for liquid powder blending is in stock at Alard, in EXCELLENT operational, mechanical,and cosmetic condition, available for immediate shipment.

Alard ite reference #:Y2838

y2672

SAFELINE FOOD GRADE METAL DETECTOR with BELT CONVEYOR, all stainless steel, with 8 5/8 inch high by 7 5/8 inch wide usable aperture opening for belt transfer of containers in a vertical orientation.

y2672_almost_done_a_email.jpgA Safeline digital stainless steel dual frequency metal detector, with integral digital operator controls, on a stainless steel body through-conveyor. The conveyor has a 5 inch wide by 7 foot long blue solid plastic interlocking chain type conveyor belt running over a UHMW anti-static plastic bed, at a 38 inch working height on threaded rod adjustable foot pads.

The conveyor belt comes complete with a belt stop alarm y2672_almost_done_email.jpg(buzzer) reject system, full length anti-static UHMW rails adjustable for height, and is powered by a 1/2 HP drive with a 208/230 volt 3 phase electrical input variable speed drive controller (electronic variable frequency drive / VFD), currently geared for up to 70 foot per minute belt speed.

Left to right product flow from the operator / control position. Vertical orientation for standing packages and/or vertical containers (taller than wide) on a conveyor line, such as for bottles, jars, cereal boxes, & etc.

As of this writing, this food process metal detection system is in stock at Alard, in EXCELLENT operational, electrical, mechanical, and cosmetic condition, available for immediate shipment.

Alard item reference #:Y2672

y2056

ROTARY CABBAGE CORING MACHINE, 4-station continuous cabbage corer for sauerkraut, cole slaw, and freshcut processing applications.

y2056_crop_email.jpgManufacturer rated for up to 28 heads per minute, with manual head placement on a revolving table.

All food grade stainless steel construction including product contacts, support frame and screen shrouding.

Knives available to cut but leave the core (e.g. for sauerkraut), or to remove the core (e.g. for fresh-cut cole-slaw).

1.5HP 208/230/460 volt 3-phase motor (other voltage options can be supplied up on request).

As of this writing, this CABBAGE CORER is in stock at Alard in UNUSED / LIKE NEW CONDITION, ready to go and available for immediate shipment.

See below for VIDEO!

Alard reference #:Y2056

y2689

500 GALLON STEAM JACKETED KETTLE WITH DOUBLE-MOTION SCRAPER-AGITATOR, T316 stainless steel, Groen Model DA/2-500.


A 60 inch diameter by 55 inch deep 316T stainless steel hemispherical bottom vessel, with a 4 inch diameter center bottom outlet complete with a ball valve. Stainless steel steam jacket manufacturer tagged, U-stamped, and National Board coded for 100psi working pressure at 338 degrees Fahrenheit.

Double motion scrape surface agitation with stainless steel bridge, with a side-
scrape agitator, counterrotating bar agitator, and two 3 phase drives.

Mounted on (4) stainless steel support legs at a 79 inch infeed height, 16 inch
discharge height from the valve.

This kettle has been fully serviced by our shop including the installation of two new Baldor 3 phase motors, new scrapers etc. and is in excellent operational,
mechanical and cosmetic condition. Available for immediate shipment.

Alard item reference #:Y2689

y2217

FRUIT AND VEGETABLE WASHER / IMMERSION WASHER...

y2217o_crop_email.jpg...all stainless steel construction, 4 feet wide by 21 feet long by 32 inch deep tapered bottom wash tank with a 49 inch infeed height, and (2) elevating discharge conveyors.

  • Full length 48" wide bottom conveyor (for non floating products) at a 64 inch discharge height..

  • 10 foot 9 inch long top incline discharge belt with power lift, for floating products at a 78" discharge height.

  • Both conveyors have interlocking plastic chain type belts with 1/8 inch wide by 3/4 inch long slot perforations.

Product is immersed for 14 feet of linear travel in water, to the 7 foot 6 inch incline discharge section. (2) powered stainless steel paddles over the tank section assure product submersion and impel product toward the discharge.Power conveyor lift for cleaning beneath the top discharge conveyor.

All food grade stainless steel construction, for industrial vegetable and fruit product food processing applications.

(3) stainless steel shrouded horsepower motors, consisting of one each for the paddles and one powering the conveyor belts. Standard fractional HP drive on the conveyor lift mechanism. All drives are 108/230/460 volt 3 phase.

As of this writing, this industrial / commercial continuous vegetable washer / fruit washer is in stock at Alard, in good condition, available of immedite shipment as-is, or can be test run and serviced by our shop to excellent condition, for timely shipment.

Alard item reference #:Y2217

About this Archive

This page is an archive of entries from October 2015 listed from newest to oldest.

September 2015 is the previous archive.

November 2015 is the next archive.

Find recent content on the main index or look in the archives to find all content.


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)