A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

December 2015 Archives

y2945

STEAM BOILER, 60HP 150psi, gas-fired...

y2945o_crop_email.jpgSellers X-series Model 60HP-77COM IMMERSION FIRED STEAM BOILER, a horizontal single pass firetube boiler manufacturer tagged, ASME, UL, and National Board coded for 150 psi working pressure. Currently jetted for LP gas.

Includes a Sellers BOILER FEED SYSTEM, which utilizes the direct injection of live steam into stored water to pre-heat the boiler feed water, both reducing dissolved oxygen by up to 90% (diminishing wear on the boiler) while otherwise increasing boiler efficiency.

As of this writing, this package boiler system is in stock at Alard, with manuals, in UNUSED condition, with minor cosmetic rumples from shipping and handling (see pictures), but otherwise LIKE NEW, ready to go, and available for immediate shipment.

Alard item reference #:Y2945

y2781

HYCOR ROTOSTRAINER RSA-2584 ROTARY DRUM SCREEN for liquid / solids separation...

y2781b_crop_email.jpgAn externally fed rotating drum screener, for separating liquids and solids, such as wastewater recovery, dewatering, and/or solids separation.

The unfiltered liquid is fed via a 12 inch diameter inlet into a head tank which directs the liquid / solid slurry onto the outside of the 25 inch diameter by 84 inch long wedgewire strainer reel which has .010 inch sieve openings. The cylinder rotates so that any solids which stick to the outside of the drum are scraped off by a stainless steel doctor blade, and drop off the edge. Meantime the liquid is filtered through the sieve screen and into a catch tank with a 16 inch diameter discharge below. Additional screen clearing action is provided by a stainless steel spray header running through the center of the wedge-wire cylinder.

Food grade stainless steel constuction, including stainless steel screener drum, cabinet, and support frame. 1/2 HP 208/230 volt 3 phase drive turns the rotary screen.

As of this writing, this rotary drum wastewater screen is in stock at Alard, in EXCELLENT operational condition, available for timely shipment.

Alard item reference #:Y2781

y2714

KAPS-ALL Model E AUTOMATIC 4 SPINDLE CAPPING MACHINE.

y2714b_crop_email.jpgA Kapsall capper manufacturer rated to handle 13mm to 70mm continuous thread caps, including tamper evident and child-resistant cap closures, at up to 80 containers per minute running metal, glass, or plastic bottles, jars, and / or vials.

This screw capper is configured with 4 cap tightener spindles over a 7 foot 6 inch long stainless steel THROUGH-CONVEYOR for straight line inline capping, with 4.5 inch wide Delrin plastic tabletop chain with adjustable container guide rails and dual container side-gripper belts.

Stainless steel cap hopper with vibrator supplies caps to the FEED SYSTEMS ModelFSRF24 CAP SORTER-FEEDER, which supplies caps to the adjustable cap chute which places them on the containers.

Painted main support base with stainless steel upper shrouding. Mounted on adjustable height support legs on casters.

Operator control panel with variable speed drives on the cap tightening quills, conveyor, sorter and container gripper belts, with 110 volt single phase (standard household current).

Painted main support base with stainless steel upper shrouding. Mounted on adjustable height support legs on casters.

As of this writing, this Kapsall bottle capper is in stock at Alard, in good condition, available for timely shipment.

Alard item reference #:Y2714

y2487

BELT STEAM BLANCHER, stainless steel, 15 foot long by 30 inch wide belt...

y2487e_crop_email.jpgContinuous steam belt blancher with a 30 inch wide interlocking plastic chain type belt formulated for high temperatures, with 1/16 inch by 3/4 inch elongated belt perforations.

The tunnel begins with a 22 inch long open infeed area, which feeds into the 15 foot long enclosed steam tunnel with top and bottom steam injection headers, leading on to a 24 inch long open discharge section.

Complete with water sprays on infeed and discharge to help keep steam inside the tunnel. 4.5 inch maximum product clearance under removable top covers. Has a water collection and drain pan on the infeed end.

All food grade stainless steel product contacts, conveyor and tunnel body, and support frame curently set at a 29 inch working height. 21 foot 7 inches long by 48 inches wide, by 43 inches high overall dimensions.

3/4HP 208 / 230 / 460 volt 3 phase stainless steel motor, with fixed speed gear drive set for 45 foot per minute belt speed.

As of this writing, this steam vegetable blancher is in stock at Alard, in LIKE NEW CONDITION, available for immediate shipment.

Alard item reference #:Y2487

y2688

EXTRUCTOR / BLOCK GRINDER, Rietz Model RE-15, 25HP...

y2688e_crop_email.jpg24 inch long by 22 inch wide tapered infeed hopper to 15" diameter auger / breaker rotor diameter, to extrusion plate discharge. All food grade stainless steel product contact surfaces. 95 inch infeed height, 68 inch discharge height on a sturdy painted steel frame.

25 HP 208 / 230 / 460 volt 3 phase drive motor.

As of this writing, this Rietz extructor is in stock in EXCELLENT mechanical, electrical, and cosmetic condition, awaiting arrival of a 12-spoke extrusion plate with 2.5 inch by 3.5 inch tapered openings to be ready for shipment.

Alard item reference #:Y2688

y2831

URSCHEL Model 1700 COMITROL.

y2831a_crop_email.jpgConfigured with slicing head, conical infeed hopper, with open bottom discharge, oil mist lubrication system for high speed operation, and factory electrical control panel with safety interlock system controlling the 15HP 3 phase drive. 51 inch infeed height, 21 inch discharge height.

All food grade stainless steel construction, including tubular support frame, all product contact surfaces, guards and shrouds.

As of this writing, this Urschel 1700 Comitrol comminuting machine is in stock at Alard, in VERY good condition, available for timely shipment.

Alard item reference #:Y2831

y2916

100 GALLON STAINLSS STEEL KETTLE, 150 psi steam jacketed, with DOUBLE MOTION SCRAPER-AGITATOR...

y2916_crop_email.jpg...A reconditioned Cherry Burrell 100 gallon KETTLE, with a 36 inch diameter by 30 inch deep hemispherical bottom stainless steel vessel with a 3 inch diameter center bottom outlet with manual ball valve, all with Tri-clamp connections. Stainless steel bottom steam jacket manufacturer tagged, U-stamped and National Board coded for 150 psi, at temperatures from -20 degrees Fahrenheit to 400 degrees Fahrenheit.

y2916c_crop_email.jpgAdjustable angle agitator settable in six positions from vertical to full INA (inclined agitator) position. Dual motion scrape surface agitation with side and bottom scraper running in one direction, outside a counterrotating center paddle agitator. Each agitator has it's own 2 HP 230/460 volt 3 phase gearmotor drive.

Food grade sanitary stainless steel construction, including agitator support bridge, pipe leg and support frame, configured for a 48 inch infeed height, and 8 inch discharge height. A valve handle rod extending out beyond the support frame allows the bottom valve to be conveniently opened and closed without having to crawl under the kettle to reach the valve.

As of this writing this refurbished jacketed cooking kettle is in stock at Alard, in EXCELLENT operational, mechanical and cosmetic condition, ready for immediate shipment.

Alard item reference #:Y2916

y2190

CONVEYORIZED METAL DETECTOR with BELT CONVEYOR, with RETRACTABLE BELT REJECT. 4 inch high by 24 inch wide usable aperture opening in it's epoxy-painted aluminum search head enclosure.

y2190b_crop_email.jpgThe GORING KERR model DSP2 detection head has integral DIGITAL controls, and comes mounted on an aluminum through-conveyor with a 21.5 inch wide by 68 inch long interlocking plastic chain type belt running over an anti-static UHMW plastic bed.

This conveyor belt has a pneumatic RETRACTING-BELT / pull-back reject system. When contaminated product is detected, pneumatic cylinders pull the end of the belt back 7 inches to allow rejected product to drop beneath the conveyor, the belt is then pushed back to it's full length so the following products can continue passing across the belt without interruption; for continuous operation.

208/230/460 volt three-phase motor, 110 volt single phase electrical input for the search head, with compressed-air/pneumatic powered reject device.

A food grade belt transfer metal detection system for food processing or other industrial process applications.

As of this writing, this metal detection system and is in stock at Alard, in operational condition, needing conveyor legs, and overall cosmetic cleanup.

Alard item reference #:Y2190

y2839

LYCO HOT WATER ROTARY BLANCHER, 48 inch diameter by 8 foot long drum, stainless steel...

y2839_crop_email.jpg4 foot diameter by 96 inch long stainless steel blancher reel with 1/16 inch perforations, under a stainless steel hinged tilt cover with balancing counterweight. Open infeed at 60 inch infeed height, ferris wheel discharge with discharge chute descending to a 48 inch discharge height.

All food grade stainless steel product contacts and supporty2839a_crop_email.jpg frame. Blancher reel screen has clamp secured access doors for cleaning and sanitation.

Trunnion driven drum with 1 HP 230/460 volt 3 phase motor.

As of this writing, this Lyco rotary drum blancher is in stock at Alard, in very good condtion, available for timely shipment.

Alard item reference #:Y2839

y2687

LYCO HOT WATER ROTARY BLANCHER, 60 inch diameter by 8 foot long drum, stainless steel.

y2687c_crop_email.jpg5 foot diameter by 96 inch long stainless steel blancher reel with 1/8" perforations, under a stainless steel gable top cover with 2-way pneumatic power assist cover lift. Open infeed at 44 inch infeed height, ferris wheel discharge with discharge chute descending to a 55 inch discharge height.

All food grade stainless steel product contacts and supporty2687_crop_email.jpg frame.Complete with CIP system consisting of 2 spray bars and stainless steel centrifugal pump.

Trunnion driven drum with 3 HP 230/460 volt 3 phase motor.

As of this writing, this Lyco rotary drum blancher is in stock at Alard, in very good condtion, available for timely shipment.

Alard item reference #:Y2687

y2661

WHALLON MAGNETIC TRAY PALLETIZER...
...for stacking shrink-wrapped trays of cans onto 40 inch by 48 inch pallets.

y2661r_crop_email.jpgTrays are fed from your line onto a roller ball pattern forming table where the operator slides the trays into position. From this forming table, a powered pusher bar moves the trays onto a powered-roller pickup table. The pickup table has additional powered push bars on the other 3 sides to square-up and tighten the grid formation. From there, the 40 inch by 42 inch magnetic head lifts the layer of trays and places them onto the pallet.

Pallets are presented from an automatic pallet dispensery2661o_crop_email.jpg via a 6 foot long powered pallet conveyor, then removed via an 18 foot long powered full pallet discharge conveyor with room to accumulate 3 full pallets plus the one being stacked.

Complete 5 HP 230/460 volt 3 phase hydraulic power pack, with electrical panel box with PLC controls.

As of this writing, this magnetic palletizer for trays is in stock at Alard, in good condition, available for immediate shipment as-is, or can be cleaned and serviced by our shop prior to shipment.

Alard item reference #:Y2661

y2857

VINCENT SCREW PRESS Model VP-12K-K1, 12 inch diameter stainless steel continuous screw press...

y2857zr_crop_email.jpgA horizontal screw press with a 12 inch diameter auger running through the 20 inch long by 11 inch wide infeed hopper, and 40 inch long screen section, to the discharge cone. The screw auger has a graduated pitch, with interrupted flighting to maximize dewatering, and resistor teeth to prevent co-rotation. Press cake moisture is controlled by a pneumatically actuated discharge cone.

All food grade stainless steel product contacts, includingy2857zz_crop_email.jpg the screen frames, which can be readily opened or removed for ease of cleaning and screen maintenance. The screens of the Vincent Press are available in a variety of arrangements and screen perforation sizes, commonly in the 0.023" to 0.095" diameter range. With wedge wire screens, 0.012" to 0.030" slots are commonly used. Selection is determined by the material being pressed and the desired pressing results.This model is manufacturer recommended as, but not limited to, a continuous dewatering press for pulp and paper, corn wet milling, as a citrus oil extractor for citrus peel, spent brewers grain dewatering, as a juice press for fruit and vegetable juicing, cooker crumb / cooking oil recovery, spent coffee, tobacco, pectin, xanthan gum, nutraceuticals, soybean protein concentrate (SPC), bioresin, cellulosic ethanol, wastewater recovery, waste dewatering / compaction.

y2857zl_crop_email.jpg10 HP motor with a heavy duty foot mounted Reeves mechanical variable speed gearbox, 208/230/460 volt 3 phase electrical input.

As of this writing, this 12 inch diameter continuous screw press is in stock at Alard, in very good operational condition, available for immediate shipment as-is, or can be fitted with perforated or wedgewire screens to buyer specification by our shop prior to shipment. CALL your Alard Sales Representative at 315-589-4511 for current availability and details.

Alard item reference #:Y2857

About this Archive

This page is an archive of entries from December 2015 listed from newest to oldest.

November 2015 is the previous archive.

February 2016 is the next archive.

Find recent content on the main index or look in the archives to find all content.


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)