A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

February 2016 Archives

y2985

FOOD METAL DETECTOR WITH NEW CONVEYOR, 26x11 opening...

y2985f_crop_email.jpgA Fortress Phantom belt transfer metal detector with a 10.75 inch high by 26 inch wide USABLE aperture opening, on a NEW stainless steel through conveyor. Aluminum search head enclosure with interference-dampening flanges on each side of chute, complete with integral digital touchpad operator controls.

The new tubular stainless steel frame belt conveyor has an y2985e_crop_email.jpg85 inch long by 22.25 inch wide interlocking plastic chain type belt, with 1/4 inch by 1/8" wedge shaped openings; running in a left to right product flow direction from the operator control position, on threaded rod adjustable foot pads.

Complete / integrated with a belt-stop-alarm REJECT, and a variable frequency drive (VFD) variable-speed controller with a new gasketed PVC electrical / control box. 110 volt single phase (standard household current) electrical input.

As of this writing this late model Fortress big box metal detection system, is in stock at Alard, in EXCELLENT operational, electrical, mechanical, and cosmetic condition, ready to go and available for immediate shipment.

Alard item reference #:Y2985

y2840

TOTE DUMPER / BIN DUMPER, food grade stainless steel for 40 inch by 48 inch bin / tote.

y2840i_crop_email.jpgHydraulic powered tipper / dumper for Gaylord boxes, food bins and totes.

  • Floor-mounted with 4" square tubular stainless steel frame construction.
  • Twin 3" diameter hydraulic lifting cylinders.
  • Stainless steel self contained hydraulic power pack with 230 volt 3 phase stainless steel shrouded drive motor.
  • Inclues operator controls and emergency stop switch.
  • Complete with 33 inch long discharge chute (can be modified to fit buyers application), which allows for a 48 inch dump as configured height.
  • Food grade stainless steel construction for fruit bins, vegetable totes, and other food process applications.

See VIDEO!

As of this writing, this floor-standing box dumper is in stock at Alard, in EXCELLENT operational, mechanical, and cosmetic condition, and available for immediate shipment.

Alard item reference #:Y2840

y2977

RECONDITIONED URSCHEL Model CC SLICER...

y2977d_crop_email.jpg

  • ...with stainless steel slice shell and impeller, stainless steel cone hopper infeed, stainless steel safety shrouding and stainless steel tubular support frame,

  • ...currently set with "flat slice" cutting head (other cutting setups available, please CALL your Alard Sales Rep at 315-589-4511 with your cutting specification).

  • Complete with stainless steel shrouded 2HP 208/230/460 volt 3 phase motor.


Manufacturer rated as a potato chip slicer, as well as for various other food products, such as cheese, nuts, fruit and vegetables such as carrots, cabbage, broccoli, mushrooms, strawberries, etc. A range of of cutting head setups are available for this machine for over a dozen different types of cuts, including flat slices, "V" Slices, "Flat-V" shreds and slices, crinkle cut potato chips, match-stick cuts, strip cuts, full shreds, V-shreds, oval shreds, wide oval shreds, crescent shreds, wide crescent shreds, and various options for grating, on input product up to 3.75 inches in any dimension. Please tell your Alard Sales Representative your cut specification.

NOTE: We have an optional stainless steel riser stand available (not shown or included but can be quoted on request) at extra cost. The stand would raise the Urschel CC slicing machine to a 55 inch infeed height, 29 inch discharge height, and leaves 30 inches wide between the suppurt legs to place a tote or bin to catch cut product.

As of this writing, this refurbished Urschel potato chip slicer is in stock at Alard in EXCELLENT operational, mechanical, electrical, and cosmetic condition available for immediate shipment.

Alard item reference #: Y2977

y2711

CVP Fresh VAC Model A600 JAW TYPE VACUUM / GAS-FLUSH / BAG SEALER with 32 inch seal bar.

y2711a_crop_email.jpgAn advanced food grade modified atmosphere packaging machine, with PLC controls, ergonomic finger start actuation, with variable logic heat seal controls for versatile and user friendly operation. 11 preset programs for fast changeover running mutliple products, running one or two bags per cycle.

  • 32 inch wide seal bar, with single bag stretcher.
  • Dual snorkels for vacuum / gassing, adjustable for spacing and depth.
  • 26 inch wide by 8 inch deep bag support shelf with back plate, adjustable for bag height.
  • Food grade sanitary stainless steel product contacts, corrosion resistant stainless steel and anodized aluminum construction.
  • Pneumatically actuated sealing jaws, with air operated vacuum pump. Air consumption maunfacturer rated at 2cfm per cycle at 80psi.
  • Adjustable angle support frame for horizontal, vertical, or angled sealing orientation, on casters.
  • Operator control panel, with controls for vacuum and / or gas flush operations.
  • 110 volt single phase 15 amp electrical input.
  • Late model, new manufacture date 2013.

As of this writing, this jaw type vacuum bag sealer in in stock at Alard, LIKE NEW and in excellent operational, electrical, mechanical, and cosmetic condition, ready for immediate shipment.

Alard item reference #:Y2711

y2717

COLLOID MILL / EMULSIFIER, Greerco Model W750...

y2717a_crop_email.jpg


A high-shear in-line MIXER manufacturer recommended for emulsification, solids incorporation, homgenous dispersions, solids deagglomeration, rapid blending, particle size reduction, and product refinment.




  • 2 inch Triclamp inlet and outlet connections.

  • Jacketed housing.

  • 7 inch diameter rotor / stator mill head,

  • crank adjustable for rotor / stator gap setting, with indicator dial to insure process repeatability.

  • All food grade stainless steel mill, with T316 staniless steel wetted parts,

  • joined via an aluminum-housed gearbox to a 25 HP 3 phase drive, mounted together on a painted steel base.

Previously used as an emulsifier in mayonnaise and salad dressing production, paired with a Waukesha model 130 pump, not included but presently available separately (call your Alard Sales Representative at 315-589-4511 for current availability).

As of this writing, this high-shear inline blender is in stock at Alard, in EXCELLENT operational, mechanical, and cosmetic condition, available for immediate shipment.

Alard item reference #:Y2717

y2798

STAINLESS STEEL SCREW PRESS with 8 inch diameter screw auger, IPEC Model PPS836.

y2798n_crop_email.jpg

  • A continuous horizontal screw press / dewatering press with an 8 inch diameter by 36 inch long screw auger.

  • 12 inch wide by 15 inch long top infeed to auger, conveyors product to the 24 inch long screen section, which drains to a stainless steel bottom liquid collection pan with a 3 inch center bottom outlet.

  • Pomace / solids end discharge with pneumatic pressure plate gate adjustable to regulate pressure in the pressing chamber.

  • All food grade stainless steel construction.

  • New in 2012, previously used in a biofuel R & D lab.

  • 2 HP 3 phase drive.


As of this writing, this dewatering screw press / juice press is in stock at Alard, in very good operational condition, available for immediate shipment.

Alard item reference #:Y2798

y2773

URSCHEL Model G DICER...

A three dimensional cutting machine, manufacturer rated for products at input up to 5.5 inches (140mm) in any dimension.

y2773e_crop_email.jpgManufacturer recommends for uniform dices, straight french fry strips, and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-our output.

Cutting parts for three dimensions are slice, crosscut, and circular knifes. Manufacturer literature specifies...

  • ...slice thickness (knob adjustable) from 1/8 inch (3.2mm) to 5/8 inch (16mm);
  • crosscut knife spindles (change part) from 9/32 inch (7.1mm) to 3 inches; and...
  • circular knife spindle (spacers and knives determine) from 1/8 inch (3.2mm) to 3 inches (76mm); --sqare cubes / dices up to 3/4 inch.


By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel G can also cut strip cuts (two-dimensional cuts) and slices (single dimensional cut).

We can complete this machine with cutting parts to fit most standard cutting specifications (please tell us your cut size requirement!).

Complete with...

  • stainless steel slice shell with 7 inch slice shell opening, powder coated arms and castings.
  • All stainless steel, cutting spindles, guards, shrouds and tubular stainless steel stand.
  • Standard 2 HP 208/230/460 volt 3 phase drive.


As of this writing, this Urschel dicer is in stock, in good condition, availablefor timely shipment.

Alard item reference #:Y2773

y2396

RECONDITIONED URSCHEL Model J DICER / STRIP CUTTER, with 9" wide feed belt and cutting spindles.

y2396l_crop_email.jpgManufacturer rated for cutting products up to 1/2" (13mm) thick, such as spinach, greens, peppers, citrus peel, celery, broccoli, parsley. Manufacturer literature specifies this model for cutting square or rectangular dices, with circular knives that can be spaced for cuts from 3/16" to 3", and a selection of crosscut spindles available for cuts from 1/4" to 3" (76mm). Strip cuts can be made by removing the crosscut knife spindle from the machine, with the length and thickness of the strips depending on the size of the original product.

Click to see VIDEO!

Food grade stainless steel and Urschalloy product contact surfaces, stainless steel tubular support frame, guards, shrouds and discharge chute. Presently set for 3/8" dices, other cut sizes are available (please CALL us with your cutting specification) to fit your needs.

Complete with 5HP 3 phase drive motor controlled by an Allen Bradley control panel with safety interlock system.

As of this writing, this reconditioned Urschel J dicer / strip cutter / greens chopper is in stock at Alard, in EXCELLENT operational, mechanical, electrical and cosmetic condition, needing only to be fitted with cutting spindles to buyer specification (please tell us your cutting requirements) prior to shipment.

Alard item reference #:Y2396

y2723

Reconditioned SCREW PRESS with 10 inch diameter auger, stainless steel, Vincent Model KP-10.

y2723n_crop_email.jpg

  • A continuous horizontal screw press with 10 inch diameter by 40 inch long decreasing pitch screw auger, with 3 inch high flights.

  • 12 inch square top infeed to auger, conveys product to the 30 inch long screen section, which drains to a stainless steel bottom juice collection pan with a 5.5 inch diameter center bottom outlet.

  • Pomace / solids end discharge with pneumatic pressure plate gate adjustable to regulate pressure in the pressing chamber.

  • All food grade stainless steel wetted / product contact parts. Painted I-beam support frame.

  • 10 HP 3 phase drive motor to be wired to buyer voltage specification.

As of this writing, this continuous screw press is at Alard, having been refurbished to EXCELLENT mechanical and cosmetic condition, with a NEW screw auger, needing only to be completed with drive to be wired to buyer voltage specification, and new press cages to be purchased from the manufacturer (buyer can purchase directly, or Alard can source). Available in stock for timely completion and shipment.

Alard item reference #:Y2723

y2932

URSCHEL MODEL 1700 COMITROL, configured with 3 inch cutting head, and 30HP drive.

y2932c_crop_email.jpg

Complete with conical in-feed hopper, bottom skirt with 9 inch discharge opening, oil mist lubrication system for high-speed operation, and factory electrical control panel with safety interlock system controlling the 30HP 3 phase brakemotor drive. 50 inch infeed height, 12 inch discharge height.

All food grade stainless steel construction, including tubular support frame, all product contact surfaces, guards and shrouds.y2932g_crop_email.jpg

As of this writing, this Urschel 1700 Comitrol comminuting machine is in stock at Alard, in VERY good condition, available for timely shipment.

Alard item reference #:Y2932

About this Archive

This page is an archive of entries from February 2016 listed from newest to oldest.

December 2015 is the previous archive.

March 2016 is the next archive.

Find recent content on the main index or look in the archives to find all content.


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)