A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

March 2016 Archives

y2999

FOOD METAL DETECTOR WITH NEW CONVEYOR, 5x18 opening...

y2999h_crop_email.jpgA Fortress Phantom food grade belt transfer metal detector with...

  • 5 inch high by 17 7/8 inch wide USABLE aperture opening with belt in place.

  • NEW stainless steel through conveyor with 60 inch long by 15.75 inch wide interlocking plastic chain type belt, with 1/4 inch by 18 inch wedge shaped openings.

  • Belt-stop-alarm REJECT system.

  • Variable speed controller.

  • Left to right product flow from operator control position.

  • 34 inch transfer conveyor working height on height-adustable feet.

  • Aluminum search head enclosure with interference-dampening flanges on each side of thru-chute.

  • Complete with integral digital touchpad operator controls.

  • New gasketed PVC reject system / conveyor control box.

  • 110 volt sintle phase electrical input (standard household current).

As of this writing this late Fortress metal detection system, is in stock at Alard, in EXCELLENT operational, electrical, mechanical, and cosmetic condition, ready to go and available for immediate shipment.

Alard item reference #:Y2999

y2790

FOOD GRADE PIPELINE METAL DETECTOR, GORING KERR Tek DSP model IN-LINE/ PIPE METAL DETECTOR with REJECT DIVERT VALVE.

y2790l_crop_email.jpgA pipeline metal detector for pumped liquid, paste, slurry, and pumpable solids applications, consisting of a stainless steel detection head, horizontal through-tube with reject valve, and stainless steel operator control panel, all mounted on an a common stainless steel frame.

  • 2 inch inner diameter by 34.25 inch anti-static UHMW plastic thru-tube for 2 inch pipeline.

  • Lee fluid flow stainless steel reject valve with Tri-clamp connections, with pneumatic actuator.

  • Sanitary Tri-Clamp inlet and outlet connectors.

  • Metal detector, pipe and reject valve all food grade / sanitary.

  • 3 inch diameter overall aperture opening in the metal search head.

  • Stainless steel control panel with digital touchpad operator controls.

  • 110 volt single phase electrical input.

  • Compressed air required for automatic pneumatic reject valve.

y2790p_crop_email.jpgPreviously used for metal detection in a 2 inch pipeline.

As of this writing, this food grade / food process inline pipe metal detection system is in stock at Alard, in EXCELLENT operational, electrical, mechanical, pneumatic, and cosmetic condition, ready to go and available for immediate shipment.

Alard item reference: Y2790

y2566

LIQUID, PASTE AND SLURRY METAL DETECTOR for 3 inch pipeline, Loma IQ2 with reject valve, FOOD GRADE...

y2566g_crop_email.jpgA pipeline metal detector for pumped liquid, paste, slurry, and pumpable solids applications...

  • Loma IQ2 stainless steel metal detector with digital touchpad contols.

  • 3 inch inner diameter by 25.5 inch long anti-static plastic through-tube, with sanitary Tri-clamp connections.

  • Lee Flo-Serv pnumatic reject valve.

  • Complete with pneumatic controls.

  • FOOD GRADE metal detector for food process applications.

  • NEW, UNUSED condition.


As of this writing, this inline metal detection system is in stock at Alard, in LIKE NEW / EXCELLENT operational, electrical, pneumatic, mechanical, and cosmetic condition, available for immediate shipment.

Alard item reference #:Y2566

y2491

SLIVER SIZER REMOVER KEY / FARMCO Model SSR5...

y2491a_crop_email.jpgAn all stainless steel roller size grader / sliver remover, which separates and removes targeted material using a series of precision-machied stainless steel rollers. Targeted products fall through the crank-adjustable-gaps between the rollers, while remaining material moves on to downstream equipment.

  • 60 inch wide by 33 inch long grading and sizing bed area with (7) 12-sided grading rollers.

  • On-the-fly grading size adjustment, 3/16" to 9/16" gap size range.

  • Food grade sanitary stainless steel construction.

  • Sealed roller bearings.

  • Full length stainless steel and UHMW plastic safety guards over the roller ends and drive sprockets along each side.

  • Manufacturer rates nominal capacityof 5 to 7 tons / hour, depending on product characteristics application, at over 95% efficiency.

  • 1 HP 3 phase stainless steel drive motor.

  • NOTE: This fines remover does not come standard with legs, nor a catch pan for dewatering, nor a takeaway conveyor to run beneath to catch the fines. Alard can fabricate legs to your specified height, and a catch pan for dewatering, or offer a conveyor to take the smalls away, at extra charge; --but unless otherwise specifically quoted in writing, none of these are included. CALL your Alard Sales Representative at 315-589-4511 for more details and / or a custom quotation.


Manufacturer recommended for removing slivers, fines, and chips; precision sizingand grading; dejuicing and deseeding; and removing debris. It operates efficiently for both small whole product and pieces such as cubes, dices, slices, wedges, fries, spears, sticks, and julienne strips.

As of this writing this dewatering fines remover grader is in stock at Alard, in very good condition, available for timley shipment.

Alard item reference #:Y2491

y2900

Reconditioned CVP FRESH VAC Model A-300 VACUUM BAG SEALER with GAS FLUSH.

y2900a_crop_email.jpgA food grade jaw type bag sealing machine for modified atmosphere packaging, with...

  • 24" wide seal bars with vacuum / gassing snorkels.

  • Sealing head over adjustable height bag holding platform.

  • Drop shelf bag support (this sealer was used over a conveyor where the "drop shelf" swings away automatically to allow the bag to drop onto the conveyor at the end of the filling cycle; if you need a takeaway conveyor, ask your Alard Sales Rep for availability).

  • The sealer is mounted on a tubular stainless steel frame with swivel adjustment for horizontal, angled, or vertical orientation.

  • High-capacity 3/4 HP single phase electric-motor driven onboard vane type type vacuum pump.

  • Complete with operator controls for sealing, vacuum, and gas flush; includes controls for double-cycling, or seal-only operation without vaccum or gas.

  • Pneumatically powered seal jaws are activated by a two-button safety-switch.

  • All food grade sanitary stainless steel and aluminum construction, manufacturer rated and USDA listed for USDA sanitary inspection standards (e.g. for meat and poultry).

As of this writing, this refurbished food grade industrial vacuum packaging machine is in stock at Alard, in EXCELLENT operational, electrical, mechanical, pneumatic and cosmetic condition, available for immediate shipment.

Alard item reference #:Y2900

y1442

M-TEK "CORR-VAC" MK I VACUUM BAG SEALER.

y1442c_crop_email.jpgA jaw type bag sealer, modified atmosphere packaging machine, with...

  • 28 inch wide seal bars with dual snorkels on 9.25 inch centers.

  • Adjustable height / orientation bag support shelf.

  • 10cfm Gast electric vane type vacuum pump.

  • 3/4 HP 208/230 volt 3 phase vacuum pump motor.

  • Set up for vacuum only, not configured for gas flush.y1442e_crop_email.jpg


  • Complete with operator controls.

  • Food grade stainless steel construction.


As of this writing, this reconditioned bag sealer in in stock at Alard, ready to go and in EXCELLENT operational, mechanical, pneumatic, electrical, and cosmetic condition, available for immediate shipment.

Alard item reference #:Y1442

y2653

CAN SEAMER, Angelus model 60L turret steam can closing machine.

y2653r_crop_email.jpgFor steam flow can closure, with a straight-line infeed conveyor, with in-motion timer. A 6-head can seamer manufacturer rated as capable of a can size range of 200 to 404 diameter, by 111 to 712 high, with proper change parts, at speeds from 175 to 500 cans per minute depending on can size run.

Complete with a 10HP 230 volt 3 phase drive.

As of this writing, this Angelus 60L can closer is in stock at Alard, in very good operational condition, available for timely shipment.

Alard item reference #: Y2653

y2636

FLOATATION WASHER with DESTONER and SCREEN, Olney Model GP-24, all stainless steel.

y2636a_crop_email.jpgOlney model GPW (General Purpose Washer) 24 floation washer-destoner. (3) component system comprised of flotation tank, riffle board destoner section, and vibratory dewatering shaker / screener.

Manufacturer rated for 5000 lbs (2267 kilograms) per hour on dry beans and 10,000 lbs per hour on rehydrated beans. Manufacturer recommended for the elimination of light trash such as skins, hulls, leaves, pods / sticks, and dirt; --as well as heavy impurities such as stones, mud balls, sand, dirt, and glass; on products such as peas, nuts, shrimp. clams, kernel corn, blueberries, dry and soaked beans, kidney beans, black beans, pinto beans, garbanzo beans, check peas, navy beans, lentils, black-eyed peas, & etc.

  • All sanitary food grade stainless steel construction.

  • Complete with Ampco stainless steel centrifugal recirculation pump.

  • 3 phase drive motors on pump and vibratory eccentric.

  • Late model, new 2011, and never installed; AS NEW, NEVER USED condition.


As of this writing this LIKE NEW Olney GP model Floation Washer with stone removal is in stock at Alard, in EXCELLENT operational, mechanical, and cosmetic condition, available for immediate shipment.

Alard item reference #:Y2636

y2508

HOPPER-FEEDER / FRUIT AND VEGETABLE DIP TANK, food grade stainless steel...

y2508a_crop_email.jpg59 inch by 59 inch by 60 inch deep washing / rinsing / immersion feed hopper
with steep incline ELEVATING DISCHARGE CONVEYOR with...

  • 15.5 inch wide by 8 foot long heavy duty white food grade rubberized belt with 2.5 inch high cleats on 8 inch centers.

  • 79 inch infeed height to hopper, 90" discharge height from belt.

  • 8 inch by 10 inch cleanout door in dip tank.

  • All food grade sanitary stainless steel construction.

  • Complete with 3 phase fixed speed incline conveyor drive motor.


As of this writing this wet hopper with feed conveyor is in stock at Alard in
VERY good condition, available for timely shipment.

Alard item reference #:Y2508

y2793

IMMERSION WASHER TANK with ELEVATING DISCHARGE CONVEYOR.

y2793c_crop_email.jpgImmersion wash tank / dip tank, 78 inches long by 24 inches wide by 15 inches deep, with an elevating discharge conveyor has a 4 inch wide plastic perforated interlocking chain type belt with 2 inch high cleats on 10 inch centers, 66 inches long.

  • The discharge conveyor is easily removable for cleaning.

  • 44 inch infeed height to tank, 60 inch discharge height from conveyor belt, on 6 inch casters for portability.

  • Food grade stainless steel construction.

  • Stainless steel pipe plumbing with Tri-clamp connectors, with water spreader at infeed end.


As of thisy2793a_crop_email.jpg writing, this small fruit and vegetable immersion washer in stock at Alard, in good condition, available as-is (missing drive) for immediate shipment, or can be cleaned and completed by our shop prior to shipment with drive installed to buyer specification, for timely shipment.

Alard item refernce #:Y2793

y1977

FOOD GRADE OPTICAL COLOR SORTER, DUNKLEY CYPRO ANDROMAT II.

y1977a_crop_email.jpgAn electronic color sorter manufacturer recommended for wet (or dry) products, such as fresh cherries, brined cheries, sliced apples, diced carrots, diced potatoes, fresh or soaked beans, and seafood products.

Compact, simple, versatile drop-through configuration, uses only 10.5 square feet of floor space, with no exposed moving parts, for low-cost / low-maintenance operation. The Andromat II sorts food products my measuring the amount of light reflected from their outer surface and comparing it to a pre-programmed standard. If any piece of product does not meet this standard, it is rejected. Thus, this product inspection system can be set to sort for overall color, for blemishes, or both.

  • Stainless steel 2 legged hopper separates the cherries to feed two lanes.

  • Each lane has it's own vibratory feeder.

  • Each vibratory feed pan even-feeds product to an "alignment chute, one for each lane.

  • The alignment chutes uniformly accelerate and singulate the product by gravity, so that the pieces can pass thorough the optical inspections zone one piece at a time.

  • The pieces leave the alignment guide in a trajectory that passes them through the inspection zone in free fall, so that they can be inspected from all sides.

  • (3) photo sensors measure the amount of light reflected by the product. ~ Accepted product continues to free fall.

  • Rejected product is deflected to a reject path via a high speed jet of air.

Manufacturer rated for food grade USDA sanitary washdown environment use, stainless steel construction, continuously welded and polished seams, and continuous CIP system in optical zone.

On a tubular stainless steel support frame adjustable for operating angle, complete with operator controls, and continuous CIP in optical zone.

Last used as a cherry color sorter for red sweet cherries and tart cherries, As of this writing, this Dunkley Cypro Andromat II product inspection system in stock at Alard, in very good condition, available for timely shipment.

Alard item reference #:Y1977

y1942

CHERRY PITTER for fresh tart cherries, DUNKLEY Model E...

y1942e_crop_email.jpgA cherry pit remover / cherry stone remover machine manufacturer rated for 1/2 inch (12.7) diameter to 13/16 inch (20.7mm) diameter fresh tart cherries, with capacity for up to 1 ton (907 kilos) per hour at approximately 5,088 cherries per minute.

  • Oscillating aluminum infeed hopper 18 inches wide by 11.5 inches long at an infeed height of 48.5 inches, with an 18 inch wide pocket sweeper brush which helps load fully load one cherry per pocket into the pitting drum.

  • Aluminum alloy stone removal drum with 15/16" diameter (24mm) cherry pockets.

  • 53 stainless, steel stone removal needles.

  • Stainless steel bottom discharge chute with slotted pan.

  • Side pit discharge with water flush and stainless steel discharge chute.

  • Complete with a lubrication cluster and oiler, painted cast iron support frame, and powered by a 1HP 3 phase drive motor.


As of this writing, this Dunkley cherry pitter for fresh sour cherries is in stock at Alard in good operational condition, available for timely shipment.

Alard item reference #:Y1942

About this Archive

This page is an archive of entries from March 2016 listed from newest to oldest.

February 2016 is the previous archive.

April 2016 is the next archive.

Find recent content on the main index or look in the archives to find all content.


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)