A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

July 2016 Archives

y3161 CRAFT BEVERAGE BOTTLING LINE

BEER / CIDER / WINE / CARBONATED BEVERAGE BOTTLING LINE for 2,000 bottles per hour.

y3161b_crop_email.jpgIdeal microbrewery, craft beer, cider or wine bottling line, for still or cabonated beverages, for crown cap or ROPP capped glass bottles.

Featuring...

  • FIMER Model RTI 9-12-1-1 S-C Monoblock Rinser / Filler / Capper which includes:
    • A 9 station rotary inverting BOTTLE RINSE station with no bottle no rinse detection.
    • A 12 valve ROTARY COUNTER-PRESSURE FILLER.
    • A ROTARY CAP TURRET capable of a standard beer bottle crown cap, or a twist-off tamper-evident ROPP cap, complete with cap sorter.

  • STS Model S2/L front and back PRESSURE SENSITIVE LABELER which applies both front and back labels from the same roll.
    • The label applicator also includes a capsule dispenser with a heat shrink section for a wine-bottle hood type finish.

  • 2,000 bottles per hour throughput capacity.

  • All food grade stainless steel product contacts, shrouds and frames.

  • Comes with change parts for running 12 oz (330 ml) and 750 ml bottles.

  • All late model equipment; was new in 2014.

  • Forms the basis of a complete line; --the only items that are needed are bottle unscrambling / infeed conveyors, and accumulation / pack off conveyors.

  • Complete with operator controls, 230 volt 3 phase electrical input.


As of this writing, this craft beverage bottling line is represented by the seller as in excellent operational, mechanical and cosmetic condition, warehoused at a northeastern US location, available for immediate shipment.

Alard item reference #: Y3161

y2145 Liqui-Box 1000 bag-in-box FILLING MACHINE

LIQUI-BOX 1000-C1TW BAG-in-BOX FILLER...

y2145b_crop_email.jpgA semi-automatic filling machine for beverage, syrup, wine, dairy, edible oils, pasteurized, ESL (extended shelf life) products, and other low-viscosity food products, filling into bag-in-box packaging.

  • Complete with 7/8" and 1" fill nozzles.

  • 24 inch by 24 inch roller bed table for bag or box transfer, with adjustable table height.

  • Complete with operator control panel.

  • All food grade sanitary stainless steel construction.

  • Pneumatic operation (compressed air required).y2145k_crop_email.jpg

  • Includes Badger model SPS regulator flow valve.

  • 110 volt single phase (standard household current) electrical input for control circuit.

  • Operations manual included.


As of this writing this Liquibox model bag in box filler is in stock at Alard, in very good condition, available for immediate shipment.

Alard item reference #:Y2145

y3159 Fortress Phantom METAL DETECTOR

FOOD METAL DETECTOR WITH NEW CONVEYOR, 5 x16 opening...

y3159_crop_email.jpg

Fortress Phantom, food grade, belt transfer metal detector with...

  • 4 15/16 inch high by 15 7/8 inch wide USABLE aperture opening with belt in place.

  • NEW stainless steel through conveyor with 60 inch long by 13.75 inch wide interlocking plastic chain type belt, wtih 1/4 inch by 1/8 inch wedge shaped opening.

  • Belt-stop-alarm REJECT system.

  • Variable speed controller.

  • Left to right product flow from operator control position.

  • 34 inch transfer conveyor working height on height-adustable feet.

  • Aluminum search head enclosure with interference-dampening flanges on each side of thru-chute.

  • Complete with integral digital touchpad operator controls.

  • New gasketed PVC reject system / conveyor control box.

  • 110 volt single phase electrical input (standard household current).

As of this writing this late model Fortress metal detection system, is in stock at Alard, in EXCELLENT operational, electrical, mechanical, and cosmetic condition, ready to go and available for immediate shipment.


Alard item reference #:Y3159

y2800 Lee 100 gallon tilt kettle

LEE 100 GALLON STAINLESS STEEL STEAM JACKETED TILT KETTLE.

y2800f_crop_email.jpgLee model 100-CHD, an all stainless steel steam-jacketed cooking kettle mounted on a three-legged stand for tilt-to-dump discharge...

  • Stainless steel steam jacket manufacturer tagged and National Board Coded for90 psi working pressure.

  • 35.5 inch diameter by 30 inch deep stainless steel hemispherical bottom vessel, with pour lip discharge.

  • 3-legged tubular stainless steel stand set for 61.75 inch infeed height.

  • Power assisted tilt-to-dump with water cylinder powery2800j_crop_email.jpg tilt.

  • All food grade sanitary stainless steel kettle, including the support stand.

  • Late model, new 2005.

  • The steam jacket has been hydrostatically pressure tested to verify integrity.


As of this writing, this 100 gallon steam jacketed kettle is in stock at Alard, in EXCELLENT operational, mechanical, and cosmetic condition, ready to go and available for immediate shipment.

Alard item reference #:Y2800

y2966

REFURBISHED FOOD GRADE METAL DETECTOR with NEW CONVEYOR BELT, 14 x 3, all stainless steel, LOMA IQ3...

y2966n_crop_email.jpgA reconditioned Loma model IQ3 stainless steel MULTI-FREQUENCY food process metal detector mounted on a NEW stainless steel belt transfer conveyor.

Click on picture(s) to enlarge!

  • 12.75 inch wide by 2.75 inch high USABLE aperture opening. Overall 14 x 4 opening is 3 7/8 inches high, but the conveyor belt and bed take up a little more than an inch of that overall height.

  • y2966k_crop_email.jpgNEW stainless steel frame belt conveyor with a (new) 12.75 inch wide by 5 foot long interlocking plastic chain type belt, with 1/8 inch by 1/4 inch triangular perforations.

  • MULTI-FREQUENCY adjustability allows for maximum sensitivity across an exceptionally wide range of product types, wet, dry, and/or conductive.

  • Integral metal detector control panel with touchpad allows for 100 product presets.

  • Belt-stop alarm REJECT - stops belt and sounds a buzzer when contamination is detected.

  • NEW gasketed PVC conveyor control box with reject reset controls, and new VARIABLE SPEED controller, controlling the new motor-drive.

  • 33 inch belt working height on threaded rod adjustable feet.

  • WASH-DOWN configuration (head and conveyor) for food grade sanitary applications.

  • 110 volt single phase (standard household current) electrical input.


As of this writing, this like-new metal detector with new conveyor is in stock at Alard, ready to go in LIKE NEW operational, electrical, mechanical, and cosmetic condition, available for immediate shipment.

Alard item reference #:Y2966

150 GALLON VERTICAL LIQUID STORAGE TANKS, all STAINLESS STEEL...

y2247_y2261_y2262_crop_email.jpgFood grade sanitary, aseptic reusable container, intermediate bulk container (IBC) liquid storage tanks for foods and pharmaceuticals, such as fruit preparations and concentrates, beverage bases, flavorings, liquid egg products, sauces, cosmetics, and/or other sensitive substances.

  • 38 inch diameter by 34 inch straight sided vessel.

  • y2247_y2261_y2262e_crop_email.jpgDomed top with two clear view ports, and 5" threaded connection center opening currently fitted with steam inlet for aseptic sterilization.
  • Steep cone bottom vessel with 2" bottom discharge, with manual butterfly valve at a 13 inch discharge height.

  • Overall tank height of 68 inches.

  • Stainless steel legs and cross-member frame with fork lift brackets.

  • 311 lbs / 141 kg tare weight.

  • Last used in a food processing application.


As of this writing, we have QUANTITY THREE (3) of these 150 gallon aseptic tote tanks in stock at Alard, in very good condition, available for immediate shipment.

Alard item reference #:Y2247, Y2261, Y2262

About this Archive

This page is an archive of entries from July 2016 listed from newest to oldest.

May 2016 is the previous archive.

August 2016 is the next archive.

Find recent content on the main index or look in the archives to find all content.


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)