A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

August 2016 Archives

Food METAL DETECTOR with NEW conveyor, 26x9 opening, Alard item Y3251

FOOD PROCESS METAL DETECTOR WITH NEW CONVEYOR, 26x9 opening...

y3251a_crop_email.jpgA LIKE NEW late model Fortress Phantom stainless steel belt-transfer metal detector with a 9 inch high by 26 inch wide USABLE aperture opening, on a NEW stainless steel through conveyor...

  • Stainless steel search head enclosure...

  • Interference-dampening stainless steel flanges on each side of the chute / aperture opening.

  • NEW tubular stainless steel frame belt conveyor with 7 foot inch long by 21.5 inch wide interlocking plastic chain type belt, with 1/4 inch by 1/8" wedge shaped openings.

  • 34.5 inch working height, on threaded rod height-adjustable foot pads.

  • VFD (Variable Frequency Drive) variable speed controller for belt speed.

  • Left to right product flow direction from the operator control position.

  • Belt-stop / alarm reject system.

  • Complete with integral digital touchpad metal detector operator controls, and (new) gasketed PVC conveyor / reject system control box.

  • 110 volt single phase (standard household current) electrical input.

A late model / LIKE NEW Fortress Phantom metal detector on an all NEWly fabricated conveyor. As of this writing, this metal detection system is in stock at Alard in EXCELLENT operational, electrical, mechanical and cosmetic condition, availble for immediate shipment.

Alard item reference #:Y3251

Urschel COMITROL model 3600 screw feed, Alard item Y3052

URSCHEL COMITROL COMITROL 3600 PROCESSOR, screw feed...


A compact screw fed Comitrol mill for low to high volume operations. Widely used for rework of gelatin capsules, biscuits, candy, noodles and a full spectrum of bakery goods. Also manufacturer recommended for reducing meats, fish, textured vegetable protein, fruits, vegetables, spices, seaweed, cheeses, chemical and pharmeceutical applications.

  • 19 inch by 19 inch by 13 inch deep tapered infeed hopper with side mounted Syntron vibrator to prevent bridging.

  • Powered screw feeder with 1/6 HP 3 phase drive motor.

  • Existing 2 inch cutting head included, manufacturer offers a wide range of cutting heads and impellers for particle sizes ranging from coarse to fine emulsions /powders / granules. CALL 315-589-4511 to discuss your cutting specification.

  • Continuous operation for uninterrupted production.

  • Designed for easy cleanup and operation.

  • Food grade, all stainless steel product contact surfaces and support frame.

  • 10 HP 208/230/460 volt 3 phase motor for cutting head, with safety interlock system integrated with guards and shrouds.


As of this writing, this Urschel Comitrol 3600 milling machine is in stock at Alard, in EXCELLENT operational, mechanical and cosmetic condition, ready to go, and available for immediate shipment.

Alard item reference #:Y3052

Lyco ROTARY DRUM COOLER, 4x12, Alard item Y3067

LYCO Model 8700 CONTINUOUS COOLER with 4 foot diameter by 12 foot long cooling reel...

y3067j_crop_email.jpg

  • Food grade / USDA sanitary all stainless steel construction, with all drum panels removable for cleaning / sanitation access.

  • Cooling drum has 1/16 inch perforated screens.

  • 18 inch wide by 24 inch long infeed hopper at a 65 inch infeed height.

  • Discharge chute to a 32 inch discharge height.

  • Hinged lift cover with pneumatic powered lift cylinders.

  • Complete with 2HP 3 phase drive.

  • Use with blancher for blancher-cooler duo, or can accept hot product from other continuous cooking equipment.

As of this writing, this Lyco rotary vegetable cooler is in stock at Alard in
very good operational condition, available for timely shipment.

Alard item reference #:Y3067

Dixie Canner Model UD-AL CAN SEAMER, Y3047

DIXIE CANNER CAN SEAMER, Model UD-AL...

y3047f_crop_email.jpg

Also see video below...

The Dixie Model UD-AL HEAVY DUTY SEAMER is a versatile semiautomatic double-seaming can closing machine for hermeticaly sealing metal ids onto round, rigid containers of various sizes, types, and styles. Manufacturer literature specifies tops or ends may be steel, tin, or aluminum, while container bodies may be meatl, plastic, or composite.

  • Manufacturer specified can size range from 2 inch diameter to 6.25 inch diameter up to 7 inches tall; --with needed change parts.

  • Manufacturer rated for up to 20 cans per minute, depending on can size and operator dexterity.

  • Comes with change parts installed for 603 x 600 cans (603 diameter by 600 high), other change parts are available for other can sizes; --call us at 315-589-4511 with your can size specification!

  • Existing gas flush setup included.

  • On casters for portability.

  • Integral operator on / off / activation controls.

  • 110 volt single phase electrical input (standard household current) to .75 HP drive.

  • Requires 80 psi compressed air to power pneumatic can lift mechanism.


As of this writing, this direct drive air lift Dixie double seamer is in stock at Alard, in LIKE NEW operation, mechanical, pneumatic, electrical, and cosmetic condition; available for immediate shipment.

Alard item reference #:Y3047

DRUM DUMPER, Vestil HDD607P, Alard item Y2863

VESTIL BARREL & DRUM DUMPER...

y2863e_crop_email.jpgA Vestil model HDD-60-7-P lift-and-dump hydraulic drum dumper.

  • Stainless steel barrel holder chute 23.5 inches wide by 83 inches long, with hold-down clamps.

  • Portable with fixed front casters, swivel rear casters, and floor screws.

  • Manufacturer rated for 750lb capacity.

  • 63.5 inch discharge height in full tilt position.y2863f_crop_email.jpg

  • 137" high overall height in full tilt position.

  • 3/4 HP 110 volt single phase hydraulic power-pack with operator controls.

  • Powder coated blue steel frame.

  • New 2011.


As of this writing, this barrel dumper is in stock at Alard, in EXCELLENT operational, mechanical, hydraulic, electrical, and cosmetic condition, ready to go and available for immediate shipment.


Alard item reference #:Y2863

DEMO VIDEO METAL DETECTOR y1337

Video demo of Food Grade METAL DETECTOR with Z-shaped / goosneck elevating conveyor / incline conveyor, Alard item Y1337

Urschel OV cutter / pickle slicer, Alard item Y3053

RECONDITIONED URSCHEL OV SLICER / PICKLE CUTTER...

y3053l_crop_email.jpg

(Also see video, below)

Manufacturer rated for producing flat or crinkle cut crosscut slices, aka "coin cuts", from elongated food products such as carrots, celery, cucumbers (pickles), peppers, squash,bananas, pepperoni, leeks, etc. With proper cutting parts, slices from 1/16" to1 3/4" can be produced in high volume.

  • Currently set up with a 16 blade cutting head for 1/4 inch slices, other cutting configurations availble: Call 315-589-4511 and tell us your cutting specification!

  • V-trough belt aligns and centers products for uniform cross cut slicing.

  • Standard "floppy belt" product hold down mechanism.

  • Food grade stainless steel construction including frame.

  • Factory control panel with safety interlock system.

  • 2 HP 208/230/460 volt 3 phase drive motor.

As of this writing, this Urschel model OV slicing machine is in stock at Alard, refurbished to EXCELLENT operational, mechanical, electrical, and cosmetic condition, available for immediate shipment.

Alard item reference #:Y3053

FLEXICON BAG DUMP STATION / ELEVATING SCREW FEED CONVEYOR, with dust collector, Alard item Y3223

FLEXICON BAG DUMP STATION / ELEVATING SCREW CONVEYOR, with dust filter...

y3223a_crop_email.jpgA manual bag dumping station consisting of a hoppper with agitator and filtration hood, with elevating screw feed conveyor. Last used in a food processing application for adding fiber material to a fruit product, and suitable for feeding free-flowing particulate, powders, and/or granular fruit, vegetable, food additives, or other bulk solids...

  • 4 foot by four foot by six foot deep tapered hopper with safety / pouring grid.

  • .75HP bottom de-clumping agitator in hopper

  • Stainless steel dust hood with hinged access door.

  • Two filter cartridge dust filtration system with 2HP vacuum and pneumatic continuous filter cleaning system.

  • Six inch diameter by 14 foot long continuous spiral elevating feeder conveyor currently configured with an anti-static plastic rigid tube; could be easily converted to a flexible tube.

  • 5HP screw auger drive.

  • 86 inch infeed height (catwalk shown in pictures not included), approximately 9' discharge height as configured.

  • Stainless steel control panel.

  • All food grade stainless steel construction.

As of this writing, this elevating screw feeder conveyor with hopper is in stock at Alard, disassembled for transport, in very good condition, available for timely shipment.

Alard item reference #:Y3223

Two stage trough belt FEED CONVEYOR, Alard item Y2596

DUAL STAGE PRODUCT SPEED-UP FEED BELT, 10 feet long.

y2596b_crop_email.jpgA two-stage trough belt for increasing belt spacing between products, and ideal as a feeder belt for Urschel cutting machines such as the Urschel OV, OC, and / or O slicer models, and/or Urschel VSC segment cutter; et al. Especially well suited for elongated products such as pickles / cucumbers, carrots, celery, zuccini, pepperoni sausage, zucchini, and similar, but also usable for other fruit and vegetable items 4 inches or less in diameter.

  • GROVEDALE Model TB62L BELT FEEDER.

  • Side-by-side belts in V-trough configuration, in two sections one-after-the-other, specifically to keep product aligned and centered while increasing spacing between products as they are fed to a cutter or other packaging or processing machine:
    • + 1st V-trough section / stage is 62 inches long.
    • + 2nd V-trough stage / section is 48 inches long.

  • 34 inch working height on adjustable height support legs.

  • Food grade stainless steel construction.

  • SEW (Eurodrive) .75 HP 230/460 volt 3 phase constant speed drive motor.

As of this writing, this product spacing infeed belt is in stock at Alard, in very good condition, available for timely shipment.

Alard item reference #:Y2596

PRODUCT SPACING FEED BELT, two stage trough belt ideal for Urschel VSC, OV, OC, O; Alard item Y2595

DUAL STAGE PRODUCT SPEED-UP FEED BELT, 10 feet long.

y2595c_crop_email.jpgA two-stage trough belt for increasing belt spacing between products, and ideal as a feeder belt for Urschel cutting machines such as the Urschel OV, OC, and / or O slicer models, and/or Urschel VSC segment cutter; et al. Especially well suited for elongated products such as pickles / cucumbers, carrots, celery, zuccini, pepperoni sausage, zucchini, and similar, but also usable for other fruit and vegetable items 4 inches or less in diameter.

  • GROVEDALE Model TB62L BELT FEEDER.

  • Side-by-side belts in V-trough configuration, in two sections one-after-the-other, specifically to keep product aligned and centered while increasing spacing between products as they are fed to a cutter or other packaging or processing machine:
    • + 1st V-trough section / stage is 62 inches long.
    • + 2nd V-trough stage / section is 48 inches long.

  • 34 inch working height on adjustable height support legs.

  • Food grade stainless steel construction.

  • SEW (Eurodrive) .75 HP 230/460 volt 3 phase constant speed drive motor.

As of this writing, this product spacing infeed belt is in stock at Alard, in very good condition, available for timely shipment.

Alard item reference #:Y2595

RECONDITIONED URSCHEL Model VSC SEGMENT CUTTER...

y3145b_crop_email.jpgPICKLE SPEAR CUTTER / SLAB CUTTER / STICK CUTTER / WEDGE SLICER / STRIP CUTTER.

The Urschel VSC lengthwise slicer cuts square, rectangular, segment, spear, wedge, stick, and slab cuts from a variety of vegetables such as cucumbers / pickles, carrots, onions, zucchini, potatoes, peppers, and other products 4 inches or less in diameter, which can be pushed at high velocity through a cutting grid. A variety of cutting heads are available for flat or crinkle cut slabs, retangular strips, square strips, and wedge / segment cuts.

  • Comes with an Urschel Velocicut 4 inch diameter 8-segment wedge cut head (other cutting heads available to be priced to buyer specification).

  • Food grade sanitary stainless steel construction.

  • Central lubrication cluster.

  • Factory stainless steel electrical control panel with safety interlock system (cuts power to drive if the machine's guards doors / shrouds are opened).

  • Aftermarket Variable Frequency Drive (VFD) variable speed control in a PVC control box.

  • 5HP 3 phase variable speed drive.

  • Inline straight-through feed high velocity cutter.


This refurbished Urschel VSC pickle cutter is in stock at Alard, in EXCELLENT operational, mechanical, electrical, and cosmetic condition, available for immediate shipment.

Alard item reference #:Y3145

Urschel VSC SEGMENT CUTTER Y3144

REFURBISHED URSCHEL Model VSC SEGMENT CUTTER...

y3144l_crop_email.jpgSPEAR CUTTER / SLAB CUTTER / STICK CUTTER / WEDGE SLICER / STRIP CUTTER.

The Urschel VSC lengthwise slicer cuts square, rectangular, segment, spear, wedge, stick, and slab cuts from a variety of vegetables such as cucumbers / pickles, carrots, onions, zucchini, potatoes, peppers, and other products 4 inches or less in diameter, which can be pushed at high velocity through a cutting grid. A variety of cutting heads are available for flat or crinkle cut slabs, retangular strips, square strips, and wedge / segment cuts.

  • Comes with an Urschel Velocicut 4 inch diameter 8-segment wedge cut head (other cutting heads available to be priced to buyer specification).

  • Food grade sanitary stainless steel construction.

  • Central lubrication cluster.

  • Factory stainless steel electrical control box with safety interlock system (cuts power to drive if the machine's guards are opened).

  • 5HP 3 phase variable speed drive.

  • Inline straight-through feed high velocity cutter.

This reconditioned Urschel VSC pickle cutter is in stock at Alard, in EXCELLENT operational, mechanical, electrical, and cosmetic condition, available for immediate shipment.

Alard item reference #:Y3144

GRAVITY FLOW METAL DETECTOR with REJECT, Y2703

GRAVITY FLOW METAL DETECTOR / DROP THROUGH METAL DETECTOR with REJECT VALVE, for FOOD PROCESS APPLICATIONS.

y2703b_crop_email.jpgA Goring Kerr model DSP food grade gravity fall metal detector with...

  • 6 inch diameter aperture opening, with 5 inch interior diameter anti-static plastic product drop-thru tube.


  • Pneumatic stainless steel reject diverter valve mechanism, with a 5 inch square / flanged product reject outlet, and a 5 inch square/flange good product outlet.
    y2703a_crop_email.jpg
  • Digital touchpad operator controls on remote cable-connected stainless steel control panel.

  • Aluminum epoxy painted search head mounted on a stainless steel support frame.

  • Presently set for a 38" infeed height (discharge sits flat on the floor as configured, so is configured to be mounted on whatever it would feed into).

  • Food grade vertical packaging metal detector.

As of this writing this gravity flow / free fall metal detection system with reject valve is in stock at Alard, in EXCELLENT operational, electrical, mechanical, pneumatic, and cosmetic condition, available for immediate shipment.

Alard item reference #:Y2703

About this Archive

This page is an archive of entries from August 2016 listed from newest to oldest.

July 2016 is the previous archive.

September 2016 is the next archive.

Find recent content on the main index or look in the archives to find all content.


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)