A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

December 2016 Archives

Urschel G DICER, strip cutter, slicer, french fry cutter, Y3236

Reconditioned Urschel Model G DICER, strip cutter, slicer, french fry cutter...

y3236m_crop_email.jpgA three dimensional cutting machine, manufacturer rated for products input sized up to 5.5 inches (140mm) in any dimension. Manufacturer recommends for uniform dices, straight french fry strips, and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-our output.

Three cutting dimensions, with options...

  • Slice thickness: From 1/8 inch / 3.2mm, up to 5/8 inch / 16mm, (knob adjustable).

  • Circular knifes: from 1/8 inch (3.2mm) to 3 inches (76mm); (spacers and number of knives determine).

  • Crosscut knife spindle spacing: from 9/32 inch (7.1mm) up to 3 inches, (change part).

  • Allows for square cubes / dices up to 3/4 inch.

  • By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel G can also cut strip cuts (two-dimensional cuts) such as for french fries, and slices (single dimensional cut).

  • We can complete this machine with cutting parts to fit most standard cutting specifications: Please call 315-589-4511 to tell us your cut size requirement!


This cutting machine features...

  • Stainless steel slice shell and impeller with 10 inch slice shell opening.

  • All food grade stainless steel construction including spindles, guards, shrouds and tubular stainless steel frame.

  • Factory control box with safety interlock system.

  • Standard 2 HP 208/230/460 volt 3 phase drive.

As of this writing, this refurbished Urschel dicer is in stock, in good condition, available for timely shipment.


Alard item reference #:Y3236

Reconditioned Urschel RA-A DICER, Y3273

y3273l_crop_email.jpgREFURBISHED URSCHEL Model RA-A DICER...

A 3-dimensional fine dicing machine for a wide range of dices and strip cuts from a variety of products such as relish, salsa, fruits, vegetables, nuts, cheeses, and processed meats.

  • Maximum product input size 3.5 inches (88.9mm) in any dimension.

  • Three cutting dimensions...
    • Slice thickness: 1/16 to 3/8 inch / 1.6 to 9.5 mm, knob adjustable.
    • Circular knife cuts: 1/8 to 1 inch / 3.2 to 25.4 mm, knives & spacers.
    • Crosscut knife cuts: .05 to 3 inch / 1.3 to 76.2 mm, change part.
    • CALL 315-589-4511 to tell us YOUR cutting specification!

  • All food grade USDA sanitary stainless steel construction.

  • Factory control panel with safety interlock system.

  • 5HP 208 / 230 volt 3 phase drive motor,


As of this writing, this reconditioned Urschel RAA relish dicer is in stock at Alard in EXCELLENT operational, mechanical, electrical, and cosmetic condition, available for immediate shipment.

Alard item reference #: Y3273

Grote 613 SLICER video demo cutting cucumbers, Y3235

Grote 613 MULTISLICER video demo cutting cucumbers...

Grote 613 SLICER cutting cucumbers, Y3235 from Alard Equipment Corporation on Vimeo.

Grote 613 multislicer for bulk and portion slicing, stacking and shingle cutting. A versatile band-type slicer manufacturer recommended for boneless non-frozen meat / cold cuts, cheeses, vegetables, fruits and bread products...

  • Manufacturer rated from 37 to 90 strokes per minute per lane.

  • Includes oscillating product holder tubes for two lane operation.

  • Food grade, USDA meat and poultry sanitary, stainless steel construction, easily disassembled and reassembled for easy cleaning and sanitation.

  • Variable slice thickness from .02 inch (.5mm) to 1/2 inch (12.7mm).

  • 30 inch long by 13 inch wide stainless steel mesh shuttle conveyor for product stacking or shingling.

  • Bulk, slice, stack and shingle modes.

  • Mfg rated for stack height to 2 inches (51mm).

  • "Accuband" continuous band cutting knife.

  • Continuous product loading during operation, gravity feed.

  • Includes integral operator control panel with variable speed controls, with slice counter for grouping slices, and variable group spacing.

  • 220 volt single phase electrical input.

As of this writing, this automatic food slicing machine is in stock at Alard, in the process of being serviced to EXCELLENT operational, mechanical, electrical, and cosmetic condition, and is available for timely shipment.

Alard item refrence #:Y3235

Urschel Comitrol 1700 PROCESSOR MILL, 30HP, MICROCUT, Alard item Y3297

URSCHEL COMITROL PROCESSOR MODEL 1700, 30HP, with MICROCUT HEAD...

y3297l_crop_email.jpgUrschel Comitrol 1700 continuous food grade milling machine, manufacturer recommended (with cutting parts specific to application) for particle size reduction of free-flowing products for granulation, slurries, pastes, patees, bakery product reworks, comminuting, granulating, milling, flaking, slicing, liquefying, dispersing, emulsifying, etc...

Manufacturer recommends (with cutting parts specific to application) for peanut butter, chicken slurries, baby food, dehydrated potato flakes, fruit and vegetable pastes, horseradish and dressings, extruded products, textured vegetable protein, biscuits and cookies, nuts, fruit pulp, various spices, corn masa, hard cheeses, and a variety of gels, ointments, and creams.

  • Manufacturer rated for product input size of 3/8 inch (9.5mm) or less depending on specific microcut head and impeller used).

  • Pipe infeed (can optionally be fitted with a conical hopper for hopper infeed applications).

  • Food grade USDA sanitary.

  • Stainless steel construction including support frame.

  • Complete oil mist lubrication assembly.

  • 30 HP 3 phase drive motor with 110 volt single phase brake.

  • Factory electrical control panel with safety interlock system.

  • Set for 460 volt 3 phase electrical input.


As of this writing, this Urschel mill is in stock at Alard, in EXCELLENT operational, mechanical, and cosmetic condition, available for immediate shipment.

Alard item reference #: Y3297

Angelus 10P CAN SEAMER VIDEO demo Y2446

ANGELUS Model 10P, STEAM FLOW CAN SEAMER.


Manufacturer recommended as an automatic all-purpose seamer for moderate production, closing cans containing liquid, or semi-liquid products or for specialized can closing or can making operations.

  • Dual random disk container infeed.

  • Single revolving type seaming head mounted to an adjustable uppere housing (keeps the tin line at a nstant height). Cans do not revolve during the seaming operation.

  • Automatic lid feed mechanism.

  • Set for 209 diameter low can (e.g. pet food or tuna can) with a pull tab lid.

  • Steam flow equipped for steam injection at can closure.

  • Manufacturer rated for can size ranges (with change parts) from 202 (54mm) diameter to 404 (191mm) diameter and up to 708 (191mm) high, at up to 80 cans per minute.

  • 3HP 460 volt 3-phase drive motor with Reliance SP500 variable speed controller.


As of this writing, this Angelus can closing machine in stock at Alard, in EXCELLENT mechanical, operational, and cosmetic condition; available for immediate shipment.

Alard item reference #:Y2664

Urschel Diversacut Sprint DICER, Y3306

URSCHEL DIVERSACUT SPRINT DICER...

Uniformly dices, strip cuts, and slices a wide variety of food products at high production capacities with speeds dependent on materials, application and machine configuration...


Manufacturer literature rates as a compact high capacity industrial food process cutting machine for...

  • Slice shell cuts 1/16 inch to 1 inch / 1.6mm to 25.4mm; --knob adjustable.
    Circular knife cuts 1/8 inch to 3 inches / 3.2mm to 76.2mm; --spindle with knives and spacers).
    Crosscut knife cuts from 3/32 inch to 1 inch / 2.4mm to 25.4mm; crosscut knife spindle assembly (change part).
  • Maximum product infeed size of 6.5 inch (165 mm) in any dimension.
  • Crinkle cut parts are also available.
  • Cutting parts can be used in various combinations for cubes, strip cuts, rectangular cuts, julienne cuts, slices, french fry cuts, as a one-dimensional slicer, two-dimensional or three-dimensional cutter.
  • This cutter is manufacturer recommended for a wide range of fruit, vegetable and meat cutting applications, including flat or crinkle cut french fries, ham, salmon, strawberries, carrots, tomoatoes, green peppers, and many more food items.
  • Please tell us YOUR CUTTING SPECIFICATION by calling us at 315-589-4511, for a quotation with the parts you need!


Machine Features...

  • Food grade USDA sanitary stainless steel construction with hinged access panels for ease of and maintenance.

  • Factory electrical control panel with safety interlock system.

  • 14.5 inch long by 15.5 inch wide hopper with a hopper extension 18 inches long by 16 inches wide by 14 inches long.

  • 9 inch slice shell opening, 14 inch diameter slice shell cutting chamber.

  • 20 inch long by 10 inch wide discharge chute.

  • On tubular stainless steel support stand with locking casters, at a 78 inch infeed height, 33 inch discharge height.

  • 1.5 HP 3 phase drive.


As of this writing, this Urschel Sprint DICER is in stock at Alard, in EXCELLENT operational, mechanical and cosmetic condition, available for immediate shipment.

Alard item reference #: Y3306

Retracting belt METAL DETECTOR video demo Y2190

CONVEYORIZED METAL DETECTOR with BELT CONVEYOR, with RETRACTABLE BELT REJECT. 4 inch high by 24 inch wide usable aperture opening...


A food grade belt transfer metal detection system for food processing or other industrial process applications.

  • Goring Kerr model DSP2 metal detection head with epoxy painted search head enclosure, with integral DIGITAL operator controls.

  • Aluminum belt transfer through-conveyor with a 22 inch wide by 68 inch long interlocking plastic chain type belt running over an anti-static UHMW plastic bed.

  • Integrated pneumatic RETRACTING-BELT / pull-back reject system: When contaminated product is detected, pneumatic cylinders pull the end of the belt back 7 inches to allow rejected product to drop beneath the conveyor, the belt is then pushed back to it's full length so the following products can continue passing across the belt without interruption; for continuous operation.

  • Threaded rod adjustable feet for a range of approximately 28 inches to 33 inches working height.

  • 208/230/460 volt three-phase motor, 110 volt single phase electrical input for the search head, with compressed-air/pneumatic powered reject device.

As of this writing, this metal detection system and is in stock at Alard, in EXCELLENT operational, electrical, pneumatic, mechanical and cosmetic condition, and available for immediate shipment.

Alard item reference #:Y2190

VIBRATORY dewatering shaker, grader, vibrating screen, 26 x 72, Alard item Y3298

VIBRATING DEWATERING SHAKER / GRADER / CONVEYOR, 26 inch wide by 72 inches long...

An Olney vibratory screen, with 26 inch wide by 6 foot long screen area with an additional 12 inch long tapered discharge...

FEATURING:

y3298k_crop_email.jpg

  • Existing screen with 1/16 inch diameter round perforations.

  • Quick release hold-down hooks allow for fast changeover of interchangeable screens.

  • Full length tapered bottom DEWATERING catch pan for solids separation from water, with 4 inch center bottom outlet with threaded connection.

  • Also suitable for use for size grading, screening, fines removal, and / or as a vibrating feed conveyor for even-feeding.

  • Food grade all stainless steel construction, including tubular stainless steel suppor frame.

  • Belt and pulley drive with eccentric powered by 1.5 HP 3 phase motor.


As of this (updated) writing, this vibratory grader / dewatering shaker is in stock at Alard, in very good operational condition,  available for immediate shipment.


Alard item reference #: Y3298

Cold shot Model ACWC-90-ELT industrial WATER CHILLER for glycol / water; Alard item Y1473

COLD SHOT AIR-COOLED GLYCOL / WATER CHILLER, Model ACWC-90-ELT.

y1473i_crop_email.jpgManufacturer rated at 7.5 tons refrigeration, 90,000 BTU per hour.

Features:

  • R-22 Freon refrigerant.

  • 7.5 HP 3 phase air cooled compressor.

  • 41 gallon stainless steel glycol / water tank with coils, 50% glycol 50% water solution recommended by manufacturer.

  • Hot gas bypass.

  • Portable, mounted on casters.

  • 2 HP 208/230/460 volt stainless steel circulation pump rated for 76 gpm @ 30 psi.

  • 43 inch long by 31 inch wide by 66 inch high overall dimensions.

  • Operator manual included.


As of this writing, this Coldshot industrial chiller / portable air cooled glycol chiller is in stock at Alard, in good condition and available for timely shipment.

Alard item reference #:Y1473

About this Archive

This page is an archive of entries from December 2016 listed from newest to oldest.

November 2016 is the previous archive.

January 2017 is the next archive.

Find recent content on the main index or look in the archives to find all content.


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)