 ALARD
EQUIPMENT CORPORATION 6483 Lake Avenue Williamson, NY 14589 U.S.A. 315-589-4511(voice) 315-589-3871(fax) |
 |
Click
on picture(s) to enlarge!
Click on picture(s) to enlarge!
Click on picture(s) to enlarge!
...with 24 inch
wide by 22 foot long stainless steel rod-wire belt with 1/8 inch by .75
inch belt openings.
3.75 inch clearance above belt for product travel.
Gentle sprays, suitable for delicate products above and below the belt.
Full water catch / drain pan underneath. On a common SS frame with a
big air-blast / air-knife dewatering blower at the discharge, and a
stainless steel recirculation pump with filter. Comes with an ozone
generator with injection blower, A-B touch screen control panel with
stainless steel electrical box with VFD speed controllers.
Can be used as a spray chiller (just pump in cold water), or as a
combination cooler / disinfectant washer. The Ozone disinfectant
process does not degrade delicate flavors like chlorine does.
As of this writing, this hydrocooler
/ spray
wash tunnel / sterilizer-washer is in stock
in very good condition, available for timely shipment.
CALL 315-589-4511 to confirm
availability, and to discuss your particular industrial food process
washing and cooling equipment needs.
Alard
item reference #: Y2106
Unless otherwise stated, volume, speed, and/or capacity estimates given are those of the manufacturer(s) of the equipment. All offers are subject to prior sales and owner's confirmations. Unless otherwise specified, any prices shown do not include skidding, crating, or freight.
|
 See our General EQUIPMENT LISTINGS  See our PRE-CUT PRODUCE EQUIPMENT LISTINGS  RECENT ACQUISTIONS  Watch ALARD.TV |
|
