food processing machinery since 1952, with over six warehouses of used
food processing machinery & equipment IN STOCK!
NY 14589 U.S.A.
DEWATERING BELT 11x2
food grade, stainless steel...
on picture(s) to enlarge!
food grade stainless steel conveyor
with perforated belt and water catch pan, for liquid-solids
separation, in the context of washing or rinsing whole or pre-cut
vegetable and fruit products for industiral food processing and
packaging. The fresh, cooked, whole, diced, sliced or shredded
product stays on the belt while water runs through the belt and is
directed to waste, or recirulated as wash water
inch wide by 24 inch long
stainless steel infeed chute tapers to 16 inches wide where it feeds
onto the belt, with crank-adjustable gate for setting the depth of
the product on the belt.
foot 4 inch long by 23.75 inches
wide, but is configured for a 22 inch USABLE width, with 5/8 inch
high by 2 inch wide UHMW plastic strips extending out over the edges
of the belt.
interlocking plastic chain type
belt has 7/16 inch long by 1/16 inch wide oval slots to allow water
to drain through the belt.
belt runs in horizontal for 6
feet, and then begins a gentle incline for 64 inches of belt length.
The elevating discharge section has
2 inch high stainless steel rails over the UHMW strips, and drops
through a 7 inch long discharge chute tapering to 12.5 inches wide.\
Mounted immediately above the
discharge end of the belt is a powerful rare-earth ferrous metal
trapping magnet shrouded in stainless steel.
There is a 4 foot long stainless
steel water catch pan beneath the horizontal section of the belt,
starting one foot from the infeed end of the belt (which is where the
infeed chute drops product onto the belt).
The dewatering pan slopes toward the
infeed end, to a center back-side outlet with a 2 inch threaded pipe
connector, which now has a right angle / elbow pipe to the right side
of the conveyor, tapered to a 1.5 inch Tri-clamp connection.
Beneath the conveyor and directed to
the return section of the belt are two cleaning / lubricating spray
headers with a stainless steel catch pan beneath.
54 inch infeed height to infeed
chute, 45 inch working height at belt, 53 inch high discharge height
from belt, 38 inch discharge height from the discharge chute, on
tubular stainless steel frame with threaded rod adjustable feet.
Overall dimensions are approximately
13 foot long by 39 inches wide by 80 inches high.
All sanitary food grade stainless
Complete with a mechanical variable
speed 3 phase drive (Call 315-589-4511 to discuss your voltage
of this writing, this food process
dewatering belt conveyor is in stock at Alard, in good condition,
for timely shipment.
CALL 315-589-4511 to confirm
availability, and to discuss your particular food process
liquid-solids separation needs.
item reference #: Y2245
otherwise stated, volume, speed,
and/or capacity estimates given are those of the manufacturer(s) of the
equipment. All offers are subject to prior sales and owner's
confirmations. Unless otherwise specified, any prices shown do not
include skidding, crating, or freight.