food processing machinery since 1952, with over six warehouses of used
food processing machinery & equipment IN STOCK!
6483 Lake Avenue
NY 14589 U.S.A.
DICER, SLICER, STRIP CUTTER...
on picture(s) to enlarge!
on picture(s) to enlarge!
stainless steel, a Kronen high-performance commercial / industrial
cube, strip and slice cutting machine, manufacturer recommended for
cutting vegetables, fruits, and meats; --including delicate products
such as onions, peppers, mushrooms, tomatoes, strawberries, beets,
apples, melon, etc. Some products should be tempered (slightly frozen)
to firm them for cutting.
This three dimensional cutter can be used with various combinations of
cutting parts for single-dimensional cutting (slicing), or two
dimensional (dicing) or three-dimensional cubing cuts, to cut products
up to 3.54 inches (90mm) at infeed.
Slice cuts adjustable
from approximately 1/10th inch to 3/4 inch (2mm to 20mm)
Circular knife spindle with
(change parts) available in steps from approximately
1/10th inch to 1 inch (2mm to
20mm) second cut.
Crosscut spindle (change part)
steps from approximately 1/10th of an inch to 1.5
inch (3mm to 40mm) for the third cut.
Combinations of the above
cutting parts allow for
square dices / cubes, strip cuts, julienne cuts, and slice cuts. CALL
315-589-4511 to confirm availability, and to discuss your
particular cutting specifications.
Crinkle cut parts available
Input up to 3.54 inch (90mm) diameter
product at infeed.
Up to 7,716 lbs (3,500 kg)
per hour throughput capacity depending on product and cut.
Fast / easy cutting parts
replacement, for cleaning and santitation, and quick product
cut changeover and efficient maintenance.
THIS machine FEATURES:
27.5 inch long by 15.5 inch
wide hopper with safety grid and water lubrication port.
Slice knife adjustable from
approximately 1/10th inch to 3/4 inch (
2mm to 20mm) first cut
, <> 1/4
inch (7mm) circular knife spindle second
cut, <> 1/3
inch (7.5mm) crosscut spindle third cut.
All food grade sanitary
stainless steel construction, including frame.
57 inch infeed height, 18 inch
discharge height, on 6 inch high casters for portability.
of this writing, this Kronen KUJ cutter is in stock at Alard, in
EXCELLENT / Like New operational, mechanical and cosmetic condition,
available for immediate shipment.
CALL 315-589-4511 to confirm availability, and to
discuss your particular food process cutting equipment
Alard item reference #: Y3529
otherwise stated, volume, speed,
and/or capacity estimates given are those of the manufacturer(s) of the
equipment. All offers are subject to prior sales and owner's
confirmations. Unless otherwise specified, any prices shown do not
include skidding, crating, or freight.