food processing machinery since 1952, with over six warehouses of used
food processing machinery & equipment IN STOCK!
NY 14589 U.S.A. 315-589-4511(voice)
6 inch diameter,
diverter, food grade stainless
on picture(s) to enlarge!
on picture(s) to enlarge!
...a CASSEL METALSHARK 2 Model GFS-150-RV
drop-through metal detector for industrial manufacturing and
packaging process applications.
6 inch diameter by 24 inch long anti-static
plastic through-tube with stainless steel connections.
The metal detection search head enclosure comes
mounted inside a 19 5/8 inch wide by 16 5/8 inch long by 20 inch high
tubular stainless steel frame, with angle cross pieces for mounting in
place as needed to support your product inspection application / usage.
Stainless steel high speed pneumatic Y-valve
reject valve, with 6 inch diameter discharge outlets; 35 inch free-fall
from inlet to bottom discharge with reject diverter in place. NOTE:
Also available in head-only configuration withOUT reject device; --CALL
ALARD at 315-589-4511 for
Touchpad operator control panel connected by 6
foot long cord so as to facilitate mounting for convenient access, with
a 5.4 inch color screen, RS-232 and RS-485 serial data acquisition
ports, and Ethernet data interface, in a T316 stainless steel
enclosure. Optional data logging software is available for tracking and
reporting for HACCP and other quality assurance and certification
A food grade metal detector specifically built
for food processing and other industrial production line metal
detection applications. All food grade / USDA sanitary hose-wash-down
stainless steel construction (IP-67/NEMA 6 search head enclosure,
IP-65/Nema4,4x,6,12 & 13 control enclosure).
110 volt single phase (standard household
current) electrical input.
Sensitivity varies depending on product run
(determined by product characteristics), especially where wet, salty,
or acidic products that are electrically conductive introduce "product
effect" into the equation, however the manufacturer rates dry
sensitivity for this head, with no product in the aperture, at a
maximum sensitivity of .8mm ferrous, 1.1 mm non ferrous, and
1.3mm stainless steel.
Quick teach feature learns new products in 4 to 7
The control unit allows for 120 product presets.
Single control board technology with all control
electronics on one circuit board maximizes reliability, and minimizes
T316 stainless steel construction: T316 stainless
steel is an extremely high-grade of stainless, more corrosion resistant
than standard 304 type stainless steel, and suitable even in corrosive
process environments, such as in processing onions, peppers, brines,
tomatoes, citrus products, etc.
NEW EQUIPMENT - Includes a 2 year
manufacturer warranty on hardware / parts.
Gravity free-fall metal detection systems are commonly used for
free-flowing granular and / or particulate products, as well as sliced,
diced, shredded and whole products in food manufacturing and other
industrial production applications. Gravity flow metal detectors are
commonly mounted under feed hoppers, or under mixer / blender
discharges, or between scales and form-fill-seal or other types of
As of this writing, this NEW industrial process gravity free-fall metal
detector is in stock NEW at Alard, available for immediate shipment.
CALL 315-589-4511 to confirm
current availability, and to discuss the details of your industrial
process metal detector needs.
item reference #: Y3861
Unless otherwise stated, volume, speed,
and/or capacity estimates given are those of the manufacturer(s) of the
equipment. All offers are subject to prior sales and owner's
confirmations. Unless otherwise specified, any prices shown do not
include skidding, crating, or freight.