food processing machinery since 1952, with over six warehouses of used
food processing machinery & equipment IN STOCK!
NY 14589 U.S.A. 315-589-4511(voice)
16 inch diameter, stainless steel...
on picture(s) to enlarge!
on picture(s) to enlarge!
Vanmark Hydrolift Series 2000 VERTICAL
DESTONER continuously rinses and
removes debris and rocks from root crop vegetables including potatoes,
carrots, sweet potatoes, yams, beets, onions, as well as other fruit
and vegetable products; while elevating it to the next step in your
OPERATION: The vertical auger
creates water turbulence that separates stones and debris from product,
removes rock, washes loose dirt away, and acts as a hopper-feeder
lifting the product to the discharge point. Separated rock, dirt and
debris settle at the bottom of the tank. The Hydrolift also provides
your product with a water-rinsing soak bath, where the use of
anti-oxidants in the solution can help prevent discoloration and
provide a final washing to improve the quality of your finished product.
24 inch long by 48 inch wide by 26 inch deep
stainless steel wet hopper infeed, with water inlet and overflow
16-inch diameter stainless steel vertical screw
gently lifts products from the water, with tens of tons-per-hour high
7 foot 9 inch (93 inch) product discharge height
from flanged discharge outlet, on stainless steel legs; --feet must be
bolted to the floor for safety / stability.
A 4 foot long bolt-on / bolt-off discharge chute
comes with it to lowerate product down to a slightly lower discharge
height if desired.
Flanged / bolted-on discharge can be reoriented
for straight-line, right-angle, left-angle or reverse discharge
direction positions. Discharge is presently oriented in an inline /
straight-line position (see pictures).
Combination all-in-one destoner / vertical
elevator / dip tank configuration provides triple-utility in a small
footprint for maximum plant floor-space utilization.
Manufacturer rates for up to 25,000 lbs per hour
12 inch by 17 inch bottom access plate, with
water drain port, for cleanout.
Food grade all stainless steel construction.
2 HP 3-phase drive.
of this writing, this stainless steel Hydrolift continuous inline screw
auger destoner is in stock at Alard, in good operational condition,
available for timely shipment.
CALL 315-589-4511 to confirm
availability, and to discuss your particular industrial food process
vegetable washing equipment needs.
item reference #: Y4086
Unless otherwise stated, volume, speed,
and/or capacity estimates given are those of the manufacturer(s) of the
equipment. All offers are subject to prior sales and owner's
confirmations. Unless otherwise specified, any prices shown do not
include skidding, crating, or freight.