food processing machinery since 1952, with over six warehouses of used
food processing machinery & equipment IN STOCK!
NY 14589 U.S.A.
SINGLE-STATION, NET WEIGH
BAG FILLING TABLE,
with wash-down scale, and adjustable height pneumatic
bag-holder, all food grade, stainless steel...
on picture(s) to enlarge!
on picture(s) to enlarge!
An Alard model BT1
food grade sanitary stainless steel
BAG PACKING TABLE / hand-pack bag
filler for fresh-cut produce packaging, with a remote readout scale,
and adjustable height pneumatic bag-holder, for filling pre-cut produce
and other food products into bags by weight. Ideal for whole, diced, or
chopped vegetables and fruits, shredded or whole leafy vegetable
products, and salad mixes.
SINGLE station configuration, two-station version also available; --for
more information see Alard item Y4442
or call 315-589-4511 to discuss your to discuss your food process bag
filling equipment need...
- The operator hangs
the bag on the bag-filling funnel and engages the bag holder by
pressing a button.
operator then pulls product by hand, from the table into the filling
tube, until the proper weight is made, as indicated by the eye-level
over/under scale. A little product can easily be removed if needed to
- The operator then
disengages the bag holder and removes the bag, puts a new bag in place,
and the process is repeated.
As of this writing, this hand-pack
bag-filler is NEW IN-STOCK at Alard, available for immediate shipment.
- The stainless steel bag-filler / pack table is
43 inches long by 37.5 inches wide inner/working dimensions, and has
sides that taper from 14 inches high at the back, and angles down to 6
inches high at the front.
- 30 pound capacity Cardinal wash-down over-under
scale, with remote readout mounted at eye level. Other model scales /
capacity are/is available to customer specification; CALL 315-589-4511
to discuss your particular fruit and/or vegetable bag weigh-filler
- 6.25 inch diameter front center filling tube.
(Can be supplied with filling tube inserts for smaller size bags).
- Stainless steel pneumatic bag holder with
push-button operator control for holding bag on the filling tube.
- Beneath the bag holder is a 12 inch wide by 10
inch front-to-back stainless steel weigh cell platform which is
adjustable to accommodate different bag heights.
- 40 inch working height at front lip, on threaded
rod adjustable feet with foot-pads.
- All food grade sanitary stainless steel
- 110 volt single phase electrical input (standard
household current) for the scales, and requires compressed air for the
CALL 315-589-4511 to confirm
present availability, and to discuss your particular pre-cut produce /
fresh produce packaging equipment needs.
item reference #: Y5226
Unless otherwise stated, volume, speed,
and/or capacity estimates given are those of the manufacturer(s) of the
equipment. All offers are subject to prior sales and owner's
confirmations. Unless otherwise specified, any prices shown do not
include skidding, crating, or freight.