October 2014 Archives

BIN DUMPER / TOTE DUMPER, STAINLESS STEEL, FOR 40 by 48 inch bins (or smaller), stainless steel, hydraulic powered; --NEW.

Stainless steel bin / tote tote holder measuring 45.75 inches wide by 48 inches long by 42 inches deep; with a manually adjustable hold-down bar with adjustment steps for 28.5 inches high, 35.5 inches high, and 53.5 inches high bin clearance. Heavy duty tubular stainless frame construction. Dump action provided by (2) 4 inch diameter hydraulic cylinders, powered by a self-contained hydraulic power pack with reservoir and manual controls, set for 208 / 230 / 460 volt 3 phase electrical input (unless otherwise specified).

Comes set for FLOOR LEVEL INFEED with a 38 inch pivot point and a 40 inch dump height from the edge of the dumper in a 45 degree fully inverted position (overall height and dump height from bin depend on the height of the bin).

Support stands to raise the height of the dumper are available as an option and will be quoted upon request, based on customer specifications.

Typically used for 40 inch by 48 inch bins.

NEW! We generally keep one or two ready-to-go bulk material bin / tote dumpers new in stock, available for immediate shipment. CALL 315-589-4511 for current availability.

You may view a picture of this machine at
https://www.alard-equipment.com/a-f/z2993sne.htm
OR find it on our general listings page under "D" for DUMPER, BIN...
NEW!
Alard item reference #:Z2993

AUTOMATIC FRUIT PITTING MACHINE...

Tavalazzi stone fruit pitter for large pit fruit such as peaches, plums, nectarines, apricots, etc. Hopper infeed for continuous / automatic operation.

All food grade stainless steel construction, including tubular stainless steel frame. Wrench-adjustable for fruit and stone/pit size.

50"H fruit inlet hopper/ 14 inch high pit discharge (on same side as infeed), 14 inch high fruit discharge (on the opposite side as the infeed. 230/460 volt 3 phase motor.

As of this writing, this fruit pit remover is in stock at Alard, in EXCELLENT operational, mechanical and cosmetic condition, available for immediate shipment.

Alard item reference #:Y2430

URSCHEL Model OC-45 CROSSCUT BIAS SLICER...

...for making angled coin cuts of oblong fruits and vegetables in a variety of crinkle or flat bias slices. Accepts products up to 2.5 inches (63.5mm) in diameter or width. 45 degree ANGLED cutting head. Manufacturer recommended for pickles, carrots, celery, plantains, rhubarb, okra, potatoes, zucchi, squash, bread, and a variety of other vegetable and fruit products, on slices from 1/16 inch to 1.75 inch. The manufacturer also offers a special micro-slice cutting head for .30 to .120 inch slices.

52" long by 2.5 inch usable width food grade white rubberized feed belt. All stainless steel product contact surfaces, guards, shrouds and tubular stainless steel frame.

Powered by two 230/460 volt 3 phase drive motors (one for the belt, one for the cutting head).

As of this writing, this refurbished Urschel slicer is in stock at Alard, in very good operational condition, available for timely shipment.
Alard item reference #:Y2225