A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

January 2019 Archives

LAMINAR OVERFLOW BRINER, Y1092

OVERFLOW BRINER LAMINAR FLOW FILLER video demo.

Laminar OVERFLOW BRINER, Y1092
from Alard Equipment Corporation.


Laminar overflow BRINE FILLER with THROUGH-CONVEYOR, all stainless steel food process filling machine for adding brine on an industrial process vegetable canning line...



FEATURES:

  • 10' long conveyor body with drive sprockets for 4" wide perforated plastic interlocking chain type belt (Intralox type) leading to a 67" long overflow weir section. 32" conveyor working height on adjustable feet.

  • Overflow weir head tank is 67" long by 10" wide by 9" deep with full-length pipe infeed for even dispersion.

  • Beneath the conveyor is a bottom overflow-catch and recirculation tank 72" long by 15" wide by 26" deep.

  • The through-conveyor is complete with a 3 phase volt fixed speed drive (can easily be rewound or replaced for US voltage).

As of this writing, this machine is in the process of being refurbished to EXCELLENT operational, mechanical and cosmetic condition, and is available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food process brine filling needs.


Alard item reference #: Y1092


Urschel G-A DICING MACHINE, Y4148

URSCHEL Model G-A DICER,
strip cutter, slicer, French fry cutter..
.


y4148a_crop_email.jpg

A three dimensional continuous cutting machine, manufacturer rated for products input sized up to 5.5 inches (140mm) in any dimension. Manufacturer recommends for uniform dices, straight French fry strips, and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-our output.


Three cutting dimensions...

  • Slice thickness: From 1/8 inch / 3.2mm, up to 5/8 inch / 16mm, (knob adjustable).

  • Circular knifes: from 1/8 inch (3.2mm) to 3 inches (76mm); (spacers and number of knives determine).

  • Crosscut knife spindle spacing: from 9/32 inch (7.1mm) up to 3 inches, (change part).

  • By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel G can also cut strip cuts (two-dimensional cuts) such as for french fries, and slices (single dimensional cut).

  • We can complete this machine with cutting parts to fit most standard cutting specifications: Please call 315-589-4511 to tell us your cut size requirement!



This cutting machine FEATURES...

  • y4148k_crop_email.jpgStainless steel slice shell and impeller with 10 inch slice shell opening.

  • Food grade sanitary stainless steel product contacts, spindles, guards, shrouds and tubular stainless steel frame.

  • Stainless steel factory control box with safety interlock system.

  • Standard 2 HP 3 phase drive.


As of this writing, this Urschel dicer is in stock, in VERY good operational, mechanical, electrical and cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your industrial volume food cutting machine / equipment needs.

Alard item reference #: Y4148

Urschel H-A DICER, Alard item Y3983



Refurbished URSCHEL Model H-A DICER,
cube cutter, strip cutter, slicer...

y3983e_crop_email.jpg


A three dimensional cutting machine, manufacturer rated for products input sized up to 5.5 inches (140mm) in any dimension. Manufacturer recommends for uniform dices, strips, and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, beets, lettuce, cabbage, broccoli, cauliflower, sweet potatoes, squash, carrots, mushrooms, turnips, cantaloupe, endive, tomatoes, cucumbers, horseradish, apples grapefruit, citrus peel, papaya, pineapple, peaches, celery, rutabagas, melon rind, and many other foods; producing clean, uniform, high-quality tons-per-our output.


Three cutting dimensions:


  • Slice thickness: From 1/8 inch / 3.2mm, up to 3/4 inch / 19.1mm, (knob adjustable).

  • Circular knifes: from 1/8 inch (3.2mm) to 3 inches (76mm); (spacers and number of knives determine).

  • Crosscut knife spindle (change part) spacing: from 3/4 inch (19.1mm) up to 1.75 inches (44.5mm).

  • By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel HA dicer can also cut strip cuts (two-dimensional cuts) such as for french fries, and slices (single dimensional cut).

  • An optional "G" kit is available to extend the range of this machine to overlap with the Urschel model G, and we can otherwise complete this machine with cutting parts to buyer specification: Please call 315-589-4511 to discuss your particular food process cutting machine need!


FEATURES:

  • y3983q_crop_email.jpgStainless steel product contact surfaces, including slice shell and impeller with 10 inch slice shell opening, cutting spindles and knives.

  • USDA sanitary model designation with food grade stainless steel construction including spindle arms, guards, shrouds and tubular stainless steel frame.

  • Factory control box with safety interlock system.

  • Standard 2 HP 208/230/460 volt 3 phase drive.


As of this writing, this reconditioned Urschel dicer is in stock, in EXCELLENT operational, mechanical, electrical and cosmetic condition, needing only to be fitted with cutting parts to buyer specification prior to a timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial food process cutting machine needs.

Alard item reference #:Y3983

Urschel OC SLICER, Alard item Y2562

URSCHEL Model OC CROSSCUT BIAS SLICER...


y2562l_crop_email.jpg

.

Urschel OC TRANSVERSE SLICER for making angled coin cuts of oblong fruits and vegetables in a variety of crinkle or flat bias slices.


Manufacturer SPECIFICATIONS:

  • Slice thickness from 1/16th inch (1.58mm) to 1.75 inch (44.5mm), with cutting wheel and belt timing set to slice.

  • Maximum product input size of 2.5 inches (63.5mm) in diameter.

  • Flat slices or crinkle cut cutting setups are available; --call 315-589-4511 to discuss your cutting spec.

FEATURES:

  • y2562r_crop_email.jpgANGLED cutting wheel configuration, for bias-cut slicing.

  • Safety interlock system with factory control panel; --cuts power to the machine is safety shrouding is removed.

  • 88 inch long food grade white rubberized product feed belt.

  • All food grade stainless steel and Urschalloy product contact surfaces, guards and shrouds, with tubular stainless steel support frame and legs.

  • 208 / 230 / 460 volt 3 phase electrical input drive motors (one for the belt, one for the cutting head), with brakemotor on cutting head.


Manufacturer recommended for pickles, carrots, celery, plantains, rhubarb, okra, potatoes, zucchi, squash, bread, and a variety of other vegetable and fruit products.

As of this writing, this LIKE NEW Urschel OC slicer is in stock at Alard in very good condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial food process fruit and vegetable cutting machine needs.

Alard item reference #: Y2562

Urschel J9-A cutting nopales cactus, Y3974

URSCHEL MODEL J9-A DICER / STRIP CUTTER
VIDEO DEMO - cutting nopales cactus...



y3974 urschel j9a cutting nopales cactus
from Alard Equipment Corporation.



A reconditioned Urschel J9-A two-dimensional belt-fed cutter, manufacturer rated for firm products up to 1/2 inch thick, with included feed roll, or thicker if product is compressible. This dicing machine / strip-cutter, chopping machine produces a variety of dices and strips. Manufacturer literature recommends for meats (frozen tempered chicken breast, beef jerky, bacon strips, sausage crumbles), baked goods (pita chips, flour tortilla strips. bread dices for croutons, brownies) & vegetables such as peppers, celery, broccoli, and parsley; and as a high-capacity greens chopper for mustard greens, collard greens, kale, and spinach.

The Urschel J9A is a high-capacity tons-per-hour cutting machine designed for very clean, precise cuts, in uninterrupted continuous operation in industrial food processing applications; including USDA meat and poultry applications, with easy cleanup and maintenance.

This machine FEATURES:

  • 9 inch wide product in-feed belt.

  • Currently complete except for cutting parts to be prepared and installed per buyer requirement: CALL 315-589-4511 to discuss your cutting specifications!
    • Circular knives can be configured from cuts for 3/16 inch to 2 inches (4.8mm to 50.8mm).
    • Crosscut spindles are available for cuts from 1/16 inch to 3 inches.

  • Food grade USDA sanitary steel construction; including frame, guards, shrouds & cutting spindles.

  • Complete with factory electrical panel with operator controls & safety interlock system.

  • 5 HP 208/230/460 volt 3 phase brake-motor drive.

As of this writing this Urschel cube cutter / strip cutter is in stock at ALARD, in EXCELLENT operational, mechanical, and electrical condition, needing only change parts per your specification installed prior to shipment.

CALL 315-589-4511 to confirm availability and to discuss your particular industrial food process cutting machine need.

ALARD item reference #: Y3974

FMC HANDPACK volumetric FILLER video demo, Z8711

FMC HAND PACK FILLER,
with AUTOMATIC filling hopper,
with TELESCOPIC VOLUMETRIC pockets
for adjustable volume filling of cans and jars.



FMC HANDPACK volumetric filling machine Z8711
from Alard Equipment Corporation.

A 26 pocket automatic volumetric filling machine set for 300 diameter cans or 3 inch diameter jars, manufacturer rated for filling "anything or everything that can be handled except an artcile that must be placed in the can or jar in a precise position".This machine includes an automatic filling hopper for granular and particulate products, such as cut string beans, diced vegetables, sliced vegetables, shoestring or french style items, mixed vegetables, lentils, wet and dry beans, coffee beans, and the like.



FEATURES:

  • TELESCOPIC POCKETS - Crank-adjustable telescoping volumetric pockets allow for easy and continuous adjustability of fill volume, giving this filler / depositor the versatility of depositing one ingredient in a partial fill, or filling the container completely with one item.

  • AUTOMATIC or MANUAL - The FMC Hand Pack rotary filler model filler features an open stainless steel filling disc which allows flexibility for automatic and/or manual operation. With the automatic filling hopper removed, some difficult products, such as uncut green beans, asparagus, and/or delicate products such as whole peeled tomatoes can be filled by hand.

  • Stainless steel infeed and discharge disks allow for maximum flexibility in line layout.

  • Clockwise rotation.

  • 1 7/8" diameter feed tubes.

  • Brush-off rail, with UHMW sweep, to assure that any excess product is swept off to provide accurate, uniform fills and prevent overfills.

  • All food grade stainless steel product contacts, with UHMW plastic cut-off valve plates.

  • Heavy-duty painted steel frame and body.

  • 208/230 volt 3 phase mechanical variable speed drive.

As of this writing, this food grade volumetric granular filler is in stock at Alard, in very good operational condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

Alard item reference #: Z8711

Urschel slicer, model GKS, video demo, Y2110

Refurbished URSCHEL Model GKS SLICER,
for flat or crinkle slice cuts...



Y2110 Urschel model GKS SLICER video demo
from Alard Equipment Corporation.


A simple, yet rugged, high-speed centrifugal slicer manufacturer recommended for cutting a wide variety of produce including beets, potatoes, carrots, cabbage, lettuce, eggplant, cucumbers, pickles, cranberries, apples, pears, strawberries, tomatoes, and peaches. Engineered for continuous tons-per-hour industrial-scale production, in a simple design for easy clean-up & maintenance. Able to slice flat strip cuts as well as crinkle strip cuts.

SPECIFICATIONS, per manufacturer literature:

  • Slice thickness easily (knob) adjustable for slice thicknesses from 1/16 inch (1.6mm) up to 5/8 inch (16mm).

  • Accepts product input up to 5.5 inches (140mm) in any dimension. Larger products must be precut. Large heads of cabbage, for example, must be quartered before slicing.

  • The GKS SLICER can cut either flat or crinkle slices.

  • Krinkle cuts made with the Model GKS will have 3 1/3 crinkles to the inch, with a depth of .070 inch (1.8mm).

  • Throughput capacity depends on slice thickness and density, so for example, root crop vegetables are rated for 12,000 lbs per hour on for ¼ inch slices, while capacity on ¾ inch slices will be 36,000 pounds per hour. On products which are lighter than root vegetables, the capacity will be lower in accordance with the density of the products.

  • At reduced capacities, this slicer will make slab cuts / sandwich cuts, slicing the full length of oblong products such as potatoes, carrots, and pickles, but the products must not be longer than 5 inches.

  • This slicer will not cross-cut elongated products, the Urschel Model OV, which we also have in stock as of this writing, is used for crosscut slicing. Call 315-589-4511 to discuss your particular industrial food process slicing machine specification.

  • Some products may need to be frozen or tempered for firmness to be succesfully cut with this machine. Call 315-589-4511 to discuss your particular industrial food process cutting machine application.

OPERATION:

  • Product is fed thru a hopper into a rotating impeller, for high-capacity continuous production.

  • Centrifugal force holds product against inside of slice case as impeller blades carry product past slicing knife.

  • Distance between adjustable case gate and slicing knife determines slice thickness.

  • Slicing case has a corrugated inner surface capable of producing krinkle-cut slices.

FEATURES:

  • Food grade sanitary stainless steel product contacts and stainless steel frame.

  • Stainless steel 7 inch opening slice shell.

  • This cutting machine is for industrial food processing applications, with capacity for 3,000 to 36,000 lbs per hour depending on product and cut size.

  • 2HP 208/230/460 volt 3 phase drive.



As of this writing, this reconditioned Urschel slicer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and to discuss your food processing needs.

ALARD item reference #: Y2110

y3850 SPIN DRYER video demo

BROTHERS LEGROW CENTRIFUGAL VEGETABLE SPIN DRYER,
large 200 lb capacity...


Brothers SPIN DRYER DEMO, Y3850
from Alard Equipment Corporation.


A Brothers Legrow high-capacity model food grade batch centrifuge system for leafy and/or pre-cut produce products, such as fresh cut lettuce, onions, shredded carrots, and other similar fresh bagged salad type products...


FEATURES:

  • Includes (6) 30-inch diameter by 2 foot deep 9.8 cubic foot removable dryer baskets, each with 3/16 inch perforations, manufacturer rated for 220 lbs capacity.

  • Includes (6) stainless steel basket dollies, as well as a lifting yolk for raising and lowering the baskets by (not included) overhead hoist.

  • Food grade stainless steel construction including all product contacts, and stainless steel base plate connected via rubber vibration isolation mounts.

  • Hinged pneumatic-power-assisted stainless steel lid with basket hold-down wheel.

  • Safety interlock system prevents machine from starting, and de-powers the machine if lid latch / cover is opened.

  • Gasketed PVC control box with programmable variable speed control system; including reverse-thrust / dynamic brake controls.

  • 5 HP 3 phase drive motor.


As of this writing, this Brothers high-capacity batch spin dryer is in stock at Alard in EXCELLENT operational, electrical, pneumatic, mechanical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular pre-cut produce / fresh-cut vegetable food processing and packaging equipment needs.

Alard item reference #:Y3850

About this Archive

This page is an archive of entries from January 2019 listed from newest to oldest.

December 2018 is the previous archive.

February 2019 is the next archive.

Find recent content on the main index or look in the archives to find all content.


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)