A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

ABRASIVE PEELER WASHER SCRUBBER, continuous, 4-roll, stainless steel, Y3918


4-ROLL WASHER / SCRUBBER / PEELER,
for fruits and vegetables,
4-roll, stainless steel, continuous,
in-stock NEW...


y3918f_crop_email.jpg


A continuous four roll peeler-washer which can be fitted with any combination of brushes and/or abrasive rolls for peeling, brush washing, scrubbing, or finishing (e.g. in combination with another peeler or steam peeler) of fruits and vegetables such as potatoes, beets, carrots, onions, cucumbers, pickles, apples, oranges and others.


OPERATION:

Raw product is continuously fed to the peeling chamber and subjected to the spinning rolls (abrasive and/or brushes as the case may be). It is important that a sufficient amount of product be kept in the peeling chamber during operation for best results. Lubricating and rinsing action is provided in the chamber by overhead sprays, while the flow of product through the machine is regulated both by a weighted discharge door, and the inclination of the machine.


FEATURES:

  • 15 inch by 27 inch top hopper inlet opening in the hinged stainless steel cover at 57 inch infeed height.

  • Lubricating and rinsing action is provided in the chamber via a stainless steel water spray pipe header with spray nozzles.

  • y3918i_crop_email.jpgPeeled product discharges through a stainless steel discharge flapper-gate which is adjustable so product can be subjected to a longer or shorter peeler /washing exposure; --at a 39 inch discharge height.

  • Water, peels and debris drop to a full length stainless steel water catch pan with a 6 inch by 6 inch center bottom outlet.

  • Capacities run in the ton-per-hour range more or less, depending on product and application (peeling, washing).

  • Shows in pictures with four (4) abrasive rolls, each 6 inch diameter by 6 foot long; but can be set with any combination of abrasive or brush rolls to buyer need / specification for stronger or gentler peeler / scrubbing action.

  • The abrasive brush rolls are mounted parallel (in-line) with product flow.

  • Complete with central lubrication cluster for ease of maintenance.

  • Chain / sprocket drive powered by a 3HP 208/230/460 volt 3 phase 60 cycle constant speed motor.

  • Includes "soft start" variable speed controller in a gasketed PVC NEMA 4 control box.


As of this writing, this scrubbing, washing, peeling machine is in stock NEW at Alard, ready to go and available for immediate shipment.


CALL 315-589-4511 to confirm availability and discuss your particular fruit and/or vegetable peeling and washing equipment need.

ALARD item reference #: Y3918




JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)
 

About this Entry

This page contains a single entry by Michael C. Shults, Alard Equipment Corp published on June 18, 2019 9:06 AM.

Urschel RA-A DICING MACHINE, Y4220 was the previous entry in this blog.

Simplex AS1 single-piston FILLER-DEPOSITOR Y3996 is the next entry in this blog.

Find recent content on the main index or look in the archives to find all content.