A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

July 2019 Archives

DIP TANK, immersion washer, VIDEO demo, Y4104


BROTHERS VEGETABLE IMMERSION WASHER / DIP TANK with ELEVATING DISCHARGE CONVEYOR,
all stainless steel
DEMO VIDEO...


Brothers fruit and vegetable sanitizing washer, preservative dip tank, stainless steel,
Y4104
from Alard Equipment Corporation.

A food grade wash tank suitable for fruit and vegetable washing and/or rinsing in preservative or disinfectant solution as part of an industrial food process and packaging line...

FEATURES:

  • Stainless steel wash tank measures 10 feet long by 30 inches wide.

  • Equipped with powered stainless steel paddle wheel to submerge products.

  • Stainless steel elevating discharge conveyor measures 12.5 feet long by 17 inches wide with flat solid plastic conveyor belt running between 5 inch high stainless steel sides.

  • Dual water spray or air blast bars located halfway up conveyor.

  • Power tilt conveyor - can be tilted out of the tank via manually controlled pneumatic cylinders, to allow access for cleaning and sanitation.

  • Washer tank has 12 inch by 6 inch bottom end clean-out plate.

  • 33 inch infeed height to tank, 48 inch discharge height from belt conveyor.

  • All food grade sanitary stainless steel construction.

  • Monted on casters for added portability.

  • NEW 3/4HP gearmotor drive.

  • 230 volt 3 phase electrical input.

As of this writing, this food grade solution dip tank / washer is in stock at ALARD, in VERY GOOD condition and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food process fruit & vegetable washing and sanitizing needs.

ALARD item reference #: Y4104

Vanmark CRATE DUMPER demo video, Alard Y4088


VANMARK STAINLESS STEEL BIN / TOTE DUMPER,

USDA food grade stainless steel,
hydraulic powered box dumper
VIDEO DEMO...


Vanmark CRATE DUMPER,
stainless steel, hydraulic, Alard item Y4088

from Alard Equipment Corporation.


The Vanmark crate dumper is a food grade USDA sanitary stainless steel forward bulk box dumper for discharging vegetables, fruits, food products, or other bulk materials from heavy bins, crates, totes and/or Gaylords. Typically used as a raw product infeed dumper for industrial food processing applications...

FEATURING:

  • Bin holder measures 60 inch wide by 39 inch long with 6 inch opening for drainage.

  • 58 inch holder infeed height.

  • Manually adjustable hold-down bar with stops for 61.5 inch, 66 inch & 70.5 inch high bin clearance.

  • 81.5 inch pivot point and a 48 inch dump height from the edge of the dumper in a 45 degree inverted position (overall height and dump heigh from bin depend on height of the bin).

  • Heavy duty tubular stainless steel construction.

  • Dump action provided by two (2) 2.5-inch diameter hydraulic cylinders powered by a self-contained 2HP hydraulic power pack with reservoir and manual controls.

  • Food grade stainless steel dumper construction with USDA sanitary welds on all product contact surfaces (i.e. in the bin holder); with continuously welded smooth seams all around the interior.

  • 208/230 volt 3 phase electrical input.

As of this writing, this food grade bin / tote dumper is in stock at ALARD, in EXCELLENT condition and available for immediate shipment.


CALL 315-589-4511 to confirm availability and discuss your particular food handling needs.

ALARD item reference #: Y4088

Cole slaw, sauerkraut, lettuce & cabbage shredder, Y2616

BROTHERS LEGROW VEGETABLE SLICER,
lettuce shredder, cole slaw cutter, sauerkraut cutting machine...

Brothers LeGrow
lettuce shredder, cabbage cutter, cole slaw slicer, sauerkraut shredder,
Alard item Y2616
VIDEO DEMO shredding cabbage

from Alard Equipment Corporation.


A continuous tons-per-hour cutting machine for one and two-dimensional cuts, slices, shreds, slaw cuts, sauerkraut cuts, especially for cabbage and lettuce...

FEATURES:

  • 24 inch diameter cutting disk with horizontal slice blades, and (optionally) vertical fin blades for two-dimensional cutting.

  • On-the-fly lever adjustable slice thickness, for up to 1.25 inch thick slices / slabs down to very thin shreds.

  • One or two-dimensional cuts for slicing, strip cuts, julienne cuts, shreds, on vegetable products such as lettuce, cabbage (slaw), onions, etc.

  • Manufacturer rated for up to 20,000 lbs per hour.

  • Food grade stainless steel construction.

  • Comes with standard three-legged stainless steel hopper: 31 inches in diameter, with a 24 inch wide feed opening in the 6 inch high sides at the back, and (3) 6.5 inch diameter feed tubes, each 12 inches deep to the cutting head.The cutter sits on tubular stainless steel riser stand on 7 inch high casters, for a 57 inch infeed height, and 29 inch discharge height.
    • Onion tubes (e.g. for onion ring cutting) are also available.
    • Currently configured as a cole slaw shredder (two-dimensional cut). Note that the feed tubes are slotted to accept the "fin blades" for the vertical dimension cut.
    • CALL 315-589-4511 do discuss your particular industrial fruit and vegetable processing cutting machine need.

  • Powered by a mechanical variable speed drive, with 208/230/460 volt 3 phase motor.


As of this writing, this Legrow Vegetable Slicing Machine is in stock at Alard in EXCELLENT operational, mechanical, and cosmetic condition, available for immedite shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

Alard item reference: #Y2616


Murzan SUCTION WAND drum unloader, Y4301

MURZAN SUCTION WAND UNLOADING SYSTEM,
food grade USDA sanitary, 316 stainless steel.
VIDEO DEMO...

Murzan AB-72 suction wand diaphragm pump unloader, Y4301
VIDEO DEMONSTRATION
from Alard Equipment Corporation.


A Murzan Model AB-72 suction wand unloader is a semi-automatic unloading system with powered column lift for raise, lower, and side-to-side boom movement, for horizontal and vertical positioning of the suction wand intake. This allows (for example) one-by-one product unloading from a pallet of open-top barrels / drums, buckets, or tubs. Manufacturer recommended for pumping food slurries, oils, sauces, fruit juice concentrates, fillings, condiments, dressings, flowable self-leveling lotions, cosmetics, and other similarly flowy / medium-viscosity liquid contents from drums, totes, buckets, bins or any kind of open top container.


FEATURES:

  • Manufacturer rated to unload up to (4) 55 gallon (200 liter) drums without removing the containeres from the pallet, pumping at up to 120 gallons per minute (depending on the specific gravity, viscosity, and consistency of the product, as well as the total dynamic head of the application).

  • Food grade USDA sanitary corrosion-resistant 316T stainless steel product contact surfaces. Easy assembly and disassembly for CIP.

  • Corrosion-resistant 316 stainless steel allows for acerbic food products such as diced tomatoes, tomato juice or flowy pastes, etc. Call 315-589-4511 to discuss your particular industrial process pump application.

  • A Murzan Model PI-50 pneumatic double diaphram pump provides the pumping power.

  • 3 inch pump and plumbing, with sanitary Tri-Clover Tri-Clamp sanitary connections.

  • All pneumatically / compressed-air operated.

  • Stainless steel stand, with stainless steel pneumatic cylinders.

  • Nema 4X pneumatic control panel with operator controls for side to side and up and down intake wand positioning with multi-axis X, Y, and Z independent motion controls.


As of this writing, this diaphragm pump bulk container unloader is in stock at Alard, in EXCELLENT operational, mechanical, pneumatic, and cosmetic condition, available for immediate shipment.


CALL 315-589-4511 to confirm availability, and to discuss your particular bulk food product unloading and pumping requirement(s).

Alard item reference #:Y4301

Safeline food METAL DETECTOR with conveyor belt, 8x4, stainless steel, Y4299.

SAFELINE FOOD GRADE METAL DETECTOR
with conveyor belt, 8x4, stainless steel...

y4299b_crop_email.jpg

A Mettler Toledo Safeline belt-transfer metal detection system with a belt-transfer through-conveyor, for industrial food processing and packaging and / or other applications where detection of metal contamination is necessary...


FEATURES:

  • 8 inch wide by 3 7/8 inch high USABLE aperture opening with the conveyor belt in place (overall opening height is 5 inches before considering the belt and bed).

  • Stainless steel search head enclosure.

  • Multi-frequency controls for wet or dry products. Call 315-589-4511 to discuss your specific food metal detection system specifications.

  • Complete with integral, digital touchpad controls with multifarious product presets.

  • y4299d_crop_email.jpgFood grade stainless steel metal-detector-through-CONVEYOR with 96 inch long by 6 inch wide interlocking plastic belt.

  • 35 inch working height on threaded-rod adjustable feet.

  • Blow-off / air-blast REJECT. Other reject configurations are available; --call 315-589-4511 to discuss your specific food process metal detection system requirements.

  • Stainless steel shrouded fractional HP 208/230/460 volt 3 phase conveyor belt drive motor.

  • 110 volt single phase (standard household current) electrical input to metal detector head.

As of this writing, this food process metal detection system has just been received into stock at Alard, and has been preliminarily test run and is in very good operational condition.

CALL 315-589-4511 to confirm current availability and discuss your specific metal detection needs!

Alard item reference #: Y4299

Urschel DiversaCut 2110 DICER, Alard item Y4300.

URSCHEL DIVERSACUT 2110 DICER...

y4300d_crop_email.jpgJUST TAKEN INTO STOCK at Alard.


An Urschel Model 2100 DC dicer is the largest machine in the Diversacut line, specifically designed to accept large infeed products up to 10 inches long, providing similarly long cuts such as for vegetable noodles. A versatile, tons-per-hour industrial food process cutting machine / dicer / slicer / julienne cutter, which uniformly cuts flat or crinkle cut dices, cubes, strips / strip cuts, french fry cuts, vegetable noodle cuts, and slices from a wide variety of food products at high production capacities with speeds dependent on materials, application and machine configuration. This dicer is designed with precise cut tolerances with slice adjustment / lock-down features which allow fine-tuning and ultimate precision...

MANUFACTURER SPECIFICATIONS:

  • Slice shell: 1/16 inch to 1 inch (1.6 to 25.4 mm) -- knob adjustable.

  • Circular knife: 1/8 to 3 inch (3.2 to 76.2 mm) -- spindle with knives & spacers.

  • Crosscut knife -- change part:
    • Flat cut: 3/32 to 1.5 inch (2.4 to 38.1 mm).
    • Crinkle Cut: 9/32 to .583 inch (7.1 to 1438 mm) with .076 inch depth.
    • "Deep Crinkle Cut": 3/8 to 1/2 inch (9.5 to 12.7 mm) with either .125 or .145 depth.
    • V-cuts: 5/16 to 1/2 inch (7.9 to 12.7 mm).

  • Flat or krinkle-cut cutting parts can be used in various combinations for cubes, strip cuts, rectangular cuts, julienne cuts, slices, flat or krinkle-cut french fry strips,. Works as a one-dimensional, two-dimensional or three-dimensional cutter. CALL 315-589-4511 to discuss YOUR particular food process cutting machine requirements.

  • Manufacturer rated for input size up to 10 inch (254mm) in any dimension which reduces need to pre-cut product;--but existing impeller has (8) paddles on 5.5 inch centers, so practical product input dimensions would be 10"L x 5" in diameter. CALL 315-589-4511 to discuss your particular food process cutting machine need.

  • This cutter is manufacturer rated for a wide range of fruit, vegetable, and meat cutting applications, including flat or crinkle cut french fries, ham, fish, breads, cookie/candy granulations, strawberries, carrots, tomatoes, green peppers, ginger, kale, zucchini, sweet potatoes, carrots, plus many more!


FEATURES:

  • Came set for 3/8 inch dice -- other cutting parts are available. CALL 315-589-4511 to discuss YOUR Urschel dicer cutting parts setup requirment.

  • Standard 10 HP stainless steel shrouded drive motor,

  • Factory stainless steel operator control panel with safety interlock system.

  • All sanitary food grade construction including frame, guards, shrouds, infeed hopper and discharge chute.

  • 230 volt 3 phase electrical input.


As of this writing, this Urschel Diversacut 2110 dicer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food process cutting machine requirements.

ALARD item reference #: Y4300

Fruit & vegetable rinser-washer for immersion in sterilization & preservative solutions, Y4218

IMMERSION WASHER / DIP TANK
with ELEVATING DISCHARGE CONVEYOR,
food grade stainless steel...

y4218a_crop_email.jpg

A wash tank with elevating discharge conveyor, for whole or sliced, diced, chopped or otherwise pre-cut fruit & vegetable product washing , rinsing, and / or immersion in preservative or clorinated disinfectant solution as part of a pre-cut produce packing or other industrial food processing and packaging line...

FEATURES:

  • Stainless steel wash tank measures 9 feet long by 30 inches wide.

  • Stainless steel elevating discharge conveyor measures 15.5 feet long by 20 inches wide with an interlocking plastic chain type conveyor belt, with 1.25 inch high cleats on 4 inch centers, and 1/8 inch by 5/8 inch openings in the belt to allow for water drainage.

  • y4218b_crop_email.jpgThe conveyor belt runs between 7 inch high stainless steel sides.

  • The conveyor can be manually lifted out of the tank to allow access for cleaning and sanitation.

  • Spray header over conveyor approximately halfway up the incline.

  • The washer tank has threaded inlet and discharge ports to facilitate plumbing the tank for water movement, to agitate and propel product from the infeed onto the belt.

  • 29 inch infeed height to tank and 24 inch discharge height from the belt conveyor.

  • All food grade sanitary stainless steel construction.

  • y4218_crop_email.jpg5HP mechanical variable speed drive.

  • 230/460 volt 3 phase electrical input.


As of this writing, this food grade sterilization solution dip tank / washer is in stock at ALARD, in VERY GOOD condition and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food process fruit & vegetable washing and/or sanitizing needs.

ALARD item reference #: Y4218

Lyco Easy-Flow 3- stage COOLER, Y4302

LYCO Easy-Flow, 3-zone
HIGH SPEED PARTICULATE COOLER...


y4302e_crop_email.jpg

A Three Zone EASY-FLOW CONTINUOUS COOLER, all food grade sanitary stainless steel. Manufacturer recommended for corn, peas, green beans, pasta, rice, proteins, dry beans, cut potatoes, potatoes, onions, plus many other vegetables and a multitude of food types and shapes.

Manufacturer literature describes a revolutionary design for rapid cooling of particulate food items, which they say can, for example, cool cooked-hot pasta products down to 40 degrees Fahrenheit, in a fraction of the time of traditional cooling methods. Each zone is capable of submerging and mixing product in cold well water or chilled water where the product rapidly releases heat.

BENEFITS:

  • y4302f_crop_email.jpgRapid cooling in a small footprint.

  • Dramatically reduced cooling times.

  • Improved food safety AND productivity.

  • Consistent results and uniform end product.

  • Lower freezer and/or refrigeration costs.

  • Heat from the first zone can be recycled to pre-heat blancher or cooker water.



SPECIFICATIONS - MANUFACTURER LITERATURE describes this 3-stage Lyco Easy-Flow continuous cooler as:

  • High-capacity - manufacturer rated for up to 5,000 pounds an hour.

  • As a high-speed particulate cooler able to cool most products like pasta, rice or vegetables, from 200 degrees Fahrenheit down to 40 degrees Fahrenheit in approximately 30 seconds.

  • y4302d_crop_email.jpgAs a flash chiller able to cool food products from 200 degrees Fahrenheit to 70degrees Farenheit in 10 seconds.

FEATURING:

  • Removable wedge-wire screens.

  • Overall dimensions: 144 inch long by 51 inch wide by 69 inch high.

  • 43 inch infeed height, 31 inch discharge height.

  • All food grade sanitary stainless steel construction with open, sanitary, easy to clean design.

  • Stainless steel electrical feed box with safety-lock-out, 460 volt 3 phase electrical input.

As of this writing, this Lyco flash chiller / plenum cooler is in stock at ALARD, EXCELLENT condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial process high-capacity cooling and chilling equipment needs.



ALARD item reference #: Y4302

About this Archive

This page is an archive of entries from July 2019 listed from newest to oldest.

June 2019 is the previous archive.

Find recent content on the main index or look in the archives to find all content.


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)