A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

FLUME WASHER, Meyer Hydrowash, food grade stainless steel, Y4418


MEYER FLUME SYSTEM,
with DEWATERING shaker & PUMP,
all stainless steel...


y4418o_crop_email.jpg

An open-trough flume washer and water-conveyor / transfer system for washing, rinsing, chilling, conveying and sanitizing leafy vegetables, diced, sliced, and chopped or even whole fruits & vegetables such as berries. Non-mechanical design provides gentle action while releasing sand, stone and floating debris...



SYSTEM FEATURES:

  • MEYER HYDROWASH flume conveyor.

    • y4418ze_crop_email.jpgU-shaped 18 inch wide by 15 inch deep by 40 foot overall length flume.

    • Designed for 9 inch minimum water depth.

    • 64 inch infeed height, 54 inch high discharge as currently configured.

    • Tubular stainless steel support frame with adjustable foot pads.

      y4418zg_crop_email.jpg
    • Baffle gate on water inlet.

    • 30 inch wide discharge flare.

    • Food grade sanitary stainless steel construction.



  • MEYER Vibra-Flex II Model VFII/SDC-36 DEWATERING SHAKER DISCHARGE CONVEYOR

y4418d_crop_email.jpg

    • 36 inch wide by 78 inch long vibratory conveyor bed with 6 inch high sides.

    • Sloped 12 inch long dimpled / rigidized solid infeed section.

    • y4418e_crop_email.jpgTwo (2) interchangeable SCREEN SECTIONS one after the other. Both are removable perpendicular 1/8 inch wedgewire / tri-rod screen panels, each 36 inch wide by 27 inch long with 1/16 inch sieve.

    • Quick-release clamps for fast, tool-less screen replacement.

    • 13.5 inch long dimpled / rigidized solid discharge section.

    • 56 inch infeed height, 49 inch high discharge.

    • Full length bottom collection pan with 6 inch center bottom outlet.

    • Food grade sanitary stainless steel construction.

    • Shaking action driven by two (2) 1/3 HP rotary / centrifugal vibrators.

    • 208/230/460 volt 3 phase electrical input.



  • SUMMIT MODEL CC 4x5-8 HORIZONTAL SUCTION PUMP

    • y4418_pump_crop_email.jpgCentrifugal pump with close couple design.

    • Manufacturer rated for 500 gallons per minute -- pump curve available.

    • Stainless steel impeller and painted ductile iron housing.

    • Flanged 5 inch inlet / 4 inch discharge connections.

    • 7.5 HP (1770 RPM) wash down motor.

    • Mounted on stainless steel base plate with threaded adjustable feet.

    • 208/230/460 volt 3 phase electrical input.

  • y4418_operator_control_panel_box_b_crop_email.jpgSTANDALONE CONTROL PANEL - stainless steel, with on/off and emergency stop switches for pump, and discharge shaker.


Previously used as a washer-chiller in an industrial pre-cut produce / fresh-cut salad processing operation.

As of this writing, this food grade sanitary flume system is in stock at Alard, in EXCELLENT operational, mechanical, & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to discuss your industrial food process flume conveying, washing, cooling and/or sanitizing needs.

ALARD item reference #: Y4418


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)
 

About this Entry

This page contains a single entry by Michael C. Shults, Alard Equipment Corp published on February 5, 2020 5:51 PM.

TWO HEINZEN SD150 SPIN DRYERS, with hydraulic pack, Y4372, Y4425, Y4426 was the previous entry in this blog.

Find recent content on the main index or look in the archives to find all content.