A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

April 2020 Archives

Turbulent WASHER test run on shredded cabbage, Y4178

test run on

from Alard Equipment Corporation.

LAMINAR FLOW fruit and vegetable WASHER FLUME, food grade stainless steel. A North Star Engineered Product (NSEP) HW Series HELICAL WASH SYSTEM is a turbulent-flow IMMERSION WASHER FLUME with water-jet agitation for gentle but forceful washing for pre-cut fruits and vegetables, including cut or whole leafy greens, including delicate leaf products like spinach, baby spinach, spring mix and other pre-cut produce food products.


  • The laminar-flow HELICAL WASH FLUME is 11 feet long by 31 inches wide with agitating water jets all along the left-side near the bottom to provide spiral water flow for gentle immersion washing of delicate food products.

  • The wash tank overflows onto a 5 foot long by 30 inch wide ELEVATING DISCHARGE CONVEYOR with an interlocking chain type belt with fine perforations to allow the water to pass through while discharging the dewatered product onward.

  • The conveyor is powered by a .5 HP stainless steel shrounded motor with an aluminum shrouded gear reducer.

  • The water falls through into a stainless steel catch and balance tank, with a new Thomsen model 8 stainless steel RECIRCULATION PUMP with 7.5 HP motor.

  • All food-grade sanitary stainless steel construction.

  • The water jet nozzles are removable for sanitation.

  • All drives 208/230/460 volt 3 phase electrical input.

As of this writing, this spiral-flow washer is IN STOCK at Alard, in EXCELLENT operational, mechanical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your fresh-cut produce packing and process equipment needs.

Alard item reference #: Y4178

Urschel SL-A meat cube-cutter, strip-cutter, DICER, Y4563

Urschel Model SL-A MEAT DICER,
strip cutter, slicer...

Urschel SL-A meat strip-cutter, cube-cutter, dicer, Y4563

from Alard Equipment Corporation.

The Urschel SL-A MEAT CUBE CUTTER is manufacturer recommended as designed for continuous operation, uniformly cutting dices, strip cuts or slices of cooked or raw frozen tempered meats, including, but not limited to pepperoni, hard salami, cooked roast beef, ham, pork, mutton, chicken, liver, seafood, fish, pet food, onions, and cabbage.


  • Manufacturer rated for infeed of firm products up to 4 inches (101.6mm) in any dimension.

  • A three-dimensional cutter manufacturer rated for cuts (with appropriate change parts).

    • Slice knife cuts to 1/2 inch (12.7mm).

    • Circular knife cuts: 1/8 inch to 2 inches (3.2 to 50.8mm).

    • Crosscut kife cuts: 1/8 inch to 3 inches (3.2 to 76.2mm).

    • Many sizes and shapes of cut product can be produced by using some or all of the spindles and adjusting the slice thickness.

      • Slices can be produced by removing the circular and crosscut knife spindles.

      • Strip cuts can be made by removing the crosscut knife spindle, whence the length of the strips will depend on the size of the original product.

      • Note re cutting cubes / dices with all three spindles: This machine makes all three cuts on the cube separately, so the product is not crushed as it wouldl be on certain other types of dicing machinery.

    • CALL 315-589-4511 to discuss your specific industrial food process cutting application.

    • Manufacturer literature rates the throughput capacity of this machine at 2,500 to 5,000 lbs per hour depending on cut size and product being processed.

  • Food grade stainless steel USDA sanitary construction.

As of this writing, this Urschel SL-A meat cube and strip cutting machine is in stock at Alard, in EXCELLENT operational, mechanical, electrical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial meat processing particle size reduction application.

Alard item reference #: Y4563

Reconditioned BOCK FP90 SPIN DRYER Y4535

Bock Model FP-90.


from Alard Equipment Corporation.

This fully refurbished North Star Engineered Products (NSEP) Bock FP-90 Centrifuge Dryer is a food grade stainless steel centrifugal drying machine for drying washed fruits and vegetables, including leafy vegetables, whole or cut, in the context of an industrial pre-cut produce packing operation.


  • 7.36 cubic foot removable basket which measures 30 inches in diameter by 18 inches deep; with a 23 inch top opening.

    • Louvered basket perforations pull moisture out of the basket and away from the product.

    • Lifting "ears" on each side of the basket provide for overhead winch lift-out and easy swivel-dumping action.

  • Manufacturer rated 130 lb (dry weight) batch capacity, and up to 1,950 lbs of product per hour.

  • Food grade stainless steel product contacts including basket, tank, and base, with painted steel legs.

  • New outer water collection tank ("curb weldment").

  • Lid-opening assist cylinders (new).

  • Includes (new) operator controls with 10 minute settable timer, and safety interlock system. Machine won't start with lid open, lid locks during spin cycle.

  • Durable hydraulic transmission.

  • Pneumatic brake.

  • 5HP 230/460 volt 3 phase motor...

As of this writing, this like-new BOCK FP90 spinner is in stock at Alard, in EXCELLENT operational, electrical, mechanical and cosmetic condition, ready to go and available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular fresh-cut / pre-cut produce packing equipment needs.

Alard item reference #:Y4535

4-inch STAINLESS STEEL Food Pump with motor, Y4407



A Cornell Model 4NMP-F5K-SS stainless steel hydro transport food pump with 4 inch inlet & outlet connections, and a 5HP motor, both mounted on a tubular stainless steel frame...


  • Cornell 4NMP-F5K-SS stainless steel hydro-transport food pump with single port stainless steel impeller, 4 inch inlet and outlet.

  • Manufacturer rated for approximately 100 to 800 gallons per minte depending on RPM and head resistance (pump curves available on request -- CALL 315-589-4511).

  • Whole or cut food solids handling ability for product up to 2.94 inch (74.7 mm) diameter by 4 inch (171.6 mm) long.

  • 4 inch flanged suction outlet and discharge outlet connections appropriate for 4 inch water pipeline.

  • Food grade stainless steel pump and impeller.

  • y4407b_crop_email.jpg5HP belt drive motor, 208/230/460 volt 3 phase electrical input.

  • Designed and manufactured to pump food products in water.

  • Ideal for industrial food processing and packing applications, for chilling, cooling, washing, sanitizing and conveying food products in water. Typically used for pre-cut produce, fresh-cut salad, seafood, frozen fruit and vegetable processing, and other food manufacturing operations.

As of this writing, this refurbished Cornell stainless steel hydro-flow food pump is in stock at ALARD, in EXCELLENT condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food handling needs.

ALARD item reference #: Y4407

Bock spin dryer BASKETS for FP-95, FP-90 models, Y4572


quantity (4)...


Quantity four (4) Bock centrifugal dryer, spinner, spin dryer BASKETS for North Star Engineered Product Bock model FP-90 and FP-95 SPIN DRYERS.


  • 30 inch diameter by 19 inch deep centrifuge basket with 3/8 inch diameter perforations allow water to escape.

  • These removable spin dryer baskets have yoke lift ears for overhead winch removal, dumping, and replacement.

  • y4572a_crop_email.jpgBolt-in removable hubs.

  • Heavy food grade all stainless steel construction.

As of this writing, these used Bock spin dryer baskets are in stock at Alard in very good condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

Alard item reference #:Y4572

About this Archive

This page is an archive of entries from April 2020 listed from newest to oldest.

March 2020 is the previous archive.

May 2020 is the next archive.

Find recent content on the main index or look in the archives to find all content.

JOIN our

Email list!
Email PRIVACY explanation link!

6483 Lake Avenue
Williamson, NY  14589
315-589-3871 (fax)