300 GALLON LIQUEFIER,
stainless steel, 30HP...

DEMO VIDEO
pureeing spinach
300 gallon LIQUEFIER, 30HP, Alard item Y3438
from Alard Equipment Corporation.

A Walker 300 gallon capacity Liquefier for high-shear agitation to disolve, emulsify, disperse solids and semi-solid ingredients in liquids, including powders, natural gums, thickening agents, flours, cocoas, yeast, powdered eggs, starches, condiments, caseinates, juice concentrates, food purees, whey solids, and even cheese slurries.

FEATURES:

• 48 inch by 48 inch by 30 inch deep single wall square body blender vessel with 2.5 inch bottom side outlet with Tri-Clamp connection.
  
  
• Bottom mounted hi-shear agitator.
  
  
• 19 inch by 20 inch top hinged manway cover.
  
  
• 78 inch infeed height, 31 inch discharge height.
  
  
• USDA food grade sanitary all stainless steel construction.
  
  
• CIP ball in mixing vessel.
  
  
• NEW impeller and drive-train including bearings, bearing housing, belts, pulley.
  
  
• 30 HP 3 phase belt drive motor, available to be cleaned and serviced as currently wired to 575 volt (Canadian voltage), or can be rewound to US or other voltage per buyer specification.

As of this writing, aside from preparing the motor to buyer specification this high-shear liquid emulsifier mixer is in stock at Alard, in EXCELLENT operational, mechanical, and cosmetic condition, available for timely shipment.

CALL ALARD at 315-589-4511 for current availability, and to dicuss your food equipment needs.

Alard item reference #: Y3348

KRONEN MODEL K50-7 ECO SPIN DRYER,
with PLASTIC BASKETS...

DEMO VIDEO
Kronen SPIN DRYER, light plastic basket,
Y4424 from Alard Equipment Corporation.

A compact food grade centrifugal dryer, with Kronen engineered quality construction, for fresh produce processing plants and other similar institutional and industrial food applications. Uses light plastic baskets which can be inserted and removed by hand; without need of an overhead winch. Ideal for dewatering fresh-cut vegetable products after washing, in the context of industrial produce packing and fresh-cut processing operations producing bagged salads, packaged fruits, herbs, shredded lettuce, chopped greens and other leafy or shredded vegetable products.

FEATURES:

• Uses a 1.5 cubic foot (11.5 gallon capacity), 16.5 inch top diameter by 14 inch deep, perforated plastic baskets.
  
  
  • Light plastic dryer basket can be placed, removed and dumped by hand without aid of an overhead hoist or other apparatus.
    
    
  • Basket size easily fits under cutting machines, dewatering shakers and other upstream sources.
    
    
  • TWELVE (12) plastic dryer baskets included.
    
    
• Manufacturer rated for up to 22 lb (10 kg) load capacity.
  
  
• Capable of spinning from 250 to 850 rpm.
  
  
• 30 inch working height with adjustable threaded-rod legs.
  
  
• FDA approved food grade sanitary stainless steel construction with plastic lid.
  
  
• Operator controls include ON/OFF, seven (7) speed settings and adjustable timer.
  
  
• 1HP (.75 kW) drive motor.
  
  
• 220 volt single phase electrical input.
  
  
• Apparently shares identical appearance and features with the Kronen KS-7 ECO spinner.

As of this writing, this Kronen K50-7 ECO salad spinner is in-stock in at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 for availability and discuss your precut produce packing equipment needs.

ALARD item reference #: Y4424

8-ROLL continuous
PEELER-WASHER-SCRUBBER
for fruits and vegetables, stainless steel.

DEMO VIDEO
Vanmark 8-roll Peeler, Brush-Washer, Scrubber, Y4609
from Alard Equipment Corporation.

A refurbished VANMARK Model 2780 eight-roll continuous abrasive peeler, brush-washer, scrubber, for fuits and vegetables, especiallyroot crops such as potatoes, beets, carrots, parsnips, jicama, radishes, turnips and other products in the context of industrial food processing and pre-cut produce packing lines operations...

FEATURING:

• Currently configured with four (4) brush rolls and four (4) abrasive grit 6 inch diameter rolls mounted parallel (in-line) with product flow. Can be configured with any combination of abrasive and/or brush options for more or less peeling action. Call 315-589-4511 to discuss your industrial peeling machine need.
  
  
• 16 inch wide by 18 inch long hopper infeed at 66 inches high.
  
  
• Lubricating and rinsing action is provided in the chamber by a dual stainless steel water spray pipe header with several uniformly spaced spray nozzles.
  
  
• 20 inch diameter powered discharge metering auger with 1/3 HP drive -- controls retention time in the chamber.
  
  
• 42 inch discharge height.
  
  
• Water, peels and debris drop to a full length bottom collection pan with center bottom outlet.
  
  
• Complete with central lubrication cluster for ease of maintenance.
  
  
• Food grade sanitary stainless steel construction peeler frame and body (abrasive rolls are abrasive-coated steel).
  
  
• Hinged side access doors with prop bars.
  
  
• Gasketed PVC operator control box with variable speed control for the powered discharge auger; safety interlock system cuts all power to the machine if any of the safety doors are open.
  
  
• 10HP (fixed speed) peeling-scrubbing roll drive, .33 HP discharge auger drive (with variable speed control), 208 / 230 volt 3 phase electrical input to control box.

As of this writing, this reconditioned abrasive roller is in stock at ALARD, in EXCELLENT condition, available for immediate shipment.

CALL 315-589-4511 to confirm availbility and discuss your particular industrial food process fruit and/or vegetable peeling needs.

ALARD item reference #: Y4609

URSCHEL DIVERSACUT SPRINT DICER...

A versatile, compact, high-capacity industrial food process cutting machine, dicer, slicer, julienne cutter, which uniformly cuts flat or crinkle cut dices, cubes, strips / strip cuts, french fry cuts, and slices from a wide variety of food products at high production capacities with speeds dependent on materials, application and machine configuration...

Manufacturer SPECIFICATIONS:

• Slice shell cuts 1/16 inch to 1 inch (1.6mm to 25.4mm) -- knob adjustable.
  
  
• Circular knife cuts 1/8 inch to 3 inches (3.2mm to 76.2mm) -- spindle with knives and spacers.
  
  
• Crosscut knife cuts from 3/32 inch to 1 inch (2.4mm to 25.4mm) -- change part.
  
  
• Maximum product infeed size of 6.5 inch (165 mm) in any dimension.
  
  
• Flat or krinkle-cut cutting parts can be used in various combinations for cubes, strip cuts, rectangular cuts, julienne cuts, slices, flat or krinkle-cut french fry strips. Works as a one-dimensional slicer, two-dimensional or three-dimensional cutter. CALL 315-589-4511 to discuss YOUR particular food process cutting machine requirements.
  
  
• This cutter is manufacturer recommended for a wide range of fruit, vegetable and meat cutting applications, including flat or crinkle cut French fries, ham, salmon, strawberries, carrots, tomatoes, green peppers, and many more food items.
  
  

FEATURES:

• 17 inch long by 16 inch wide top hopper extension feeding to the slice shell.
  
  
• 9 inch slice shell opening, 14 inch diameter CRINKLE slice shell cutting chamber.
  
  
• 20 inch long by 10 inch wide discharge chute.
  
  
• On tubular stainless steel support stand with locking casters, at a 55 inch infeed height and 10 inch discharge height..
  
  
• Food grade USDA sanitary stainless steel construction with hinged access panels for ease of sanitation and maintenance.
  
  
• Factory electrical control panel with safety interlock system.
  
  
• 1.5 HP 208/230 volt 3 phase stainless steel shrouded motor drive.

As of this writing, this Urschel Sprint DICER is in stock at Alard, ready-to-go in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food process cutting machine requirements.

ALARD item reference #: Y4573

BOCK SPIN DRYER
Model FP95 CENTRIFUGE...

VIDEO DEMO
Bock FP-95 SPIN DRYER, like new, Y4533
from Alard Equipment Corporation.

A like-new Bock / North Star Engineered Products FP-95 CENTRIFUGE, food-grade batch centrifugal system with a manufacturer rated capacity of up to 1,950 lbs per hour. This industrial salad-spinner is an industry-standard tool for spin drying and dewatering of fresh-cut produce products for pre-cut produce packing applications...

FEATURES:

• 30 inch diameter by 18 inch deep basket manufacturer rated for 130 lbs capacity; with lifting yoke and basket-dolly included.
  
  
• Pneumatic self-raising lid for ease of operation.
  
  
• Safety lid interlock system prevents opening until cycle is complete and basket is stopped.
  
  
• All food grade stainless steel construction including support base, heavy-duty build.
  
  
• Gasketed stainless steel factory remote control box with electrical controls including timer, programmable variable speed controller, and electronic braking system.
  
  
• 460 volt 3 phase electrical input, and 6-80 psi / 2cfm compressed air.
  
  
• 7.5 HP 3 phase drive motor.
  
  
• We received this machine in the original factory crate, the prior owner having kept it in storage for several years but never used it.

As of this writing, this unused Bock spinner is in stock in LIKE NEW operational, electrical, mechanical, and cosmetic condition, ready to go and available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular pre-cut produce packing equipment needs.

Alard item reference #:Y4533

URSCHEL COMITROL PROCESSOR
model 3640 Slant, 40HP...

VIDEO DEMO
Urschel Comitrol Processor model 3640S, Alard item Y4289
from Alard Equipment Corporation.

A compact Comitrol mill for small volume to high capacity production operations. Widely used for rework of gelatin capsules, biscuits, candy, noodles and a full spectrum of bakery goods. Also manufacturer recommended for reducing meats, fish, textured vegetable protein, fruits, vegetables, spices, seaweed, cheeses, chemical and pharmaceutical applications.

FEATURES:

• Tapered hopper infeed 8.5 inches front-to-back by 12 inches wide and 18 inches deep.
  
  
• Existing 3 inch cutting head with Diocut impeller included, manufacturer offers a wide range of cutting heads and impellers for particle sizes ranging from coarse to fine emulsions /powders / granules. CALL 315-589-4511 to discuss your cutting specification.
  
  
• Cutting chamber / cutting head mounted at a slanted angle to facilitate product in-feed.
  
  
• Continuous operation for uninterrupted production.
  
  
• Designed for easy cleanup and operation.
  
  
• Food grade sanitary stainless steel product contact surfaces and support frame construction.
  
  
• Gasketed stainless steel electrical and operator control boxes, with safety interlock system.
  
  
• 40 HP with variable speed brakemotor drive controller with 460 volt 3 phase electrical input.

As of this writing, this Urschel Comitrol 3640 milling machine is in stock at Alard in EXCELLENT operational, mechanical, electrical, and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food processing milling and cutting equipment needs.

Alard item reference #:Y4289

STEP FEEDER with INCREMENT CUTTER,
all stainless steel...

DEMO VIDEO
Grove Dale FlightFeeder step-feeder-aligner-length cutter Y4316
from Alard Equipment Corporation.

A Grove Dale Corporation FliteFeeder elongated-product aligner with powered circular-knife length-cutter, is designed to supply a consistent flow of product spread across the width of the steps for cutting elongated vegetables such as carrots, celery, zucchini, etc. into set lengths / increments. With each stroke the feeder automatically shuffles & indexes food product into perpendicular-to-flow alignment prior to being precision fed into the increment cutter knives...

FEATURES:

• 55 inch wide by 6 foor long bed.
  
  
• 1.75 inch deep steps with 7.5 inch vertical push.
  
  
• 30 inch infeed height, 49 inch high discharge.
  
  
• Increment cutter is currently set with 1.5 inch spacing and 10 inch diameter circular blades.
  
  
• Stainless steel side-safety-shrouds.
  
• All food grade sanitary stainless steel.
  
  
• 1.5 HP stainless steel drive motor.
  
  
• Similar to a Magnuson Shufflo cutter, this GDC "Flight-Feeder" aligner-feeder-cutter, is frequently used in conjuction with the Grove Dale TROUGH BELT speed-up belt-feeder (not included but available separately as of this writing, call 315-589-4511 to confirm current availability). The combination aligner-feeder with V-belt takeaway is in turn commonly used to feed downstream equipment, such as an URSCHEL VSC segment cutter (not included but available separately as of this writing, call 315-589-4511 to confirm current availability) for wedge, spear, stick, strip, or slab cuts,, or an Urschel OV slicer (not included but available separately as of this writing, call 315-589-4511 to confirm current availability) for fine coin cuts.

As of this writing, this Shufflo-style feeder is in stock at ALARD, in process in our shop being serviced to EXCELLENT operational, mechanical & electrical condition, is close to completion and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food aligner-feeder needs.

ALARD item reference #: Y4316

URSCHEL Model G-A DICER,
strip cutter, slicer, French fry cutter...

A almost-reconditioned Urschel dicer in process in our shop. The Urschel model G-A is a three-dimensional continuous cutting machine, manufacturer rated for products input sized up to 5.5 inches (140mm) in any dimension. Manufacturer recommends for uniform dices, straight French fry strips, and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-our output.

Three cutting dimensions...

• Slice thickness: From 1/8 inch (3.2mm), up to 3/4 inch (19.1mm), (knob adjustable).
  
  
• Circular knifes: from 1/8 inch (3.2mm) to 3 inches (76mm); (spacers and number of knives determine).
  
  
• Crosscut knife spindle spacing: from 9/32 inch (7.1mm) up to 7/8 inch (22.2mm), (change part).
  
  
• By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel G can also cut strip cuts (two-dimensional cuts) such as for french fries, and slices (single dimensional cut).
  
  
• Cuts uniform cubes / dices up to 3/4 inch.
  
  
• We can complete this machine with cutting parts to fit most standard cutting specifications: Please call 315-589-4511 to tell us your cut size requirement!

This cutting machine FEATURES...

• Stainless steel slice shell and impeller with 10 inch diameter slice shell opening.
  
  
• USDA food grade sanitary model, with stainless steel product contacts, spindles, guards, shrouds and tubular stainless steel frame.
  
  
• Stainless steel factory control box with safety interlock system.
  
  
• Casters (locking on drive end) for portability.
  
  
• 2HP 3 phase drive with stainless steel shrouded motor.
  
  
• 460 volt 3 phase electrical input.

As of this writing, this reconditioned Urschel dicer is in stock, in EXCELLENT operational, mechanical, electrical and cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your industrial volume food cutting machine / equipment needs.

Alard item reference #: Y4547

ROD BELT CONVEYOR,
FOOD GRADE STAINLESS STEEL, 72x15...

DEMO VIDEO
Dunkley ROD-BELT CONVEYOR, Y4584
from Alard Equipment Corporation.

A 6 foot long by 15 inch wide rod belt Dunkley takeaway conveyor / grading belt, previously used with a Dunkley Cherry pitter (available separately) to convey pitted cherries away from the pitting machine, with belt spacing to allow any loose pits to drop through. Ideal for it's original purpose, but could as well be used as a cleaning / grading conveyor (which would allow fines to drop through), a feed conveyor, takeaway conveyor, or transfer conveyor for a wide range of raw, peeled, or cut fruits and vegetables, and/or packaged food products in a pre-cut produce packing or other industrial food manufacturing process environment. This open belt could also be set over a tank and used with overhead sprays (not included) for rinsing or washing products.

FEATURING:

• 72 inch long by 15 inch stainless steel rod belt, with 3/16 inch rods on spacings allowing for 3/8 inch openings. The conveyor did not / does not come with any bottom catch pan.
  
  
• The belt runs between stainless steel sides that flare out to a width of 20.5 inches.
  
  
• All food grade stainless steel construction, with corrosion resistant plastic bearing blocks, 4 inch diameter plastic belt pullies, and stainless steel shafts.
  
  
• Fractional HP 208 / 230 / 460v 3 phase drive 1725 RPM drive with 50:1 gear reducer.
  
  
• Did not come with, does not include legs, but we can fabricate legs to buyer specification at extra charge. Can be configured as an elevating conveyor, horizontal conveyor, or lowerating conveyor, per customer requirement. CALL 315-589-4511 to discuss your bulk food product handling needs.

As of this writing, we have this stainless steel rod-belt conveyor in stock in EXCELLENT operational, mechanical and cosmetic condition, available for immediate shipment.

Also at the time this is written, we have multiple Dunkley cherry pitting machines and multiple Dunkley cherry-pitter takeaway conveyors; CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

Alard item reference #: Y4584

Continuous band BAG SEALER with
BAG-SUPPORTING THROUGH-CONVEYOR...

Consisting of Packrite model 6000 continuous band bag sealer with tabletop chain conveyor 10 feet long by 6 inch wide belt.

These are available separately or together so CALL 315-589-4511 to confirm availability, and to discuss your particular food process bag packing and sealing requirements;

--ask for Alard items Y4228 and Y4229

ELEVATING BELT CONVEYOR, gooseneck, food grade, stainless steel, 9.5 feet long by 10.5 inch wide...

A food-grade stainless steel gooseneck conveyor with cleated belt, last used as a feed belt or elevating conveyor belt in an industrial food processing and packaging line.

FEATURING:

• 14.5 inch deep hopper at infeed, open-slotted at the infeed end right down to the belt (could be closed - see pictures).
  
  
• 10.5 inch wide cleated solid plastic interlocking chain type belt with 2 inch high cleats on 8.5 inch centers.
  
  
• Goosneck conveyor configuration with
  
  
  • 18 inch long flat infeed section...,
  • ...then an 8 foot 9 inch long incline section,
    
    
  • The conveyor belt runs between 3 inch high UHMW plastic sides for the full length of the incline.
    
    
• 60 inch high discharge with conveyor on 4 inch casters for portability.
  
  
• Complete with start/stop controls, safety lock-out, with emergency stop switch.
  
  
• Food grade sanitary stainless steel construction.
  
  
• Top mounted 3/4 HP stainless steel enclosed drive motor.
  
  
• 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this elevating conveyor belt is in stock at ALARD, in VERY good operational, mechanical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your product handling needs.

ALARD item reference #: Y3948

PADDLE BLENDER,
food grade stainless steel, 40 cubic foot, 300 gallon,
with slide-gate discharge...

A T304 stainless steel food grade batch paddle mixer with slide gate end-bottom-discharge, 40 cubic foot 300 gallon capacity, geared for a 2HP motor-drive.

FEATURING:

• The stainless steel mixing vessel measures 40 inches wide by 72 inches long by 42 inches deep.
  
  
• Single 3.5 inch diameter center shaft, with stub-ends for 2 inch diameter bearings.
  
  
• Four (4) rows of paddles each 9 inches wide by 4 inches high.
  
  
• Solid bars in each row measure 2 inches wide by 18 inches long.
  
  
• Plastic scraper blades on each end, scrape end surfaces.
  
  
• 12 inch by 12 inch bottom end discharge with air operated slide gate.
  
  
• Approximately 74 inch infeed height, and 26.5 inch discharge height on a tubular sanitary stainless steel support frame.
  
  
• All 304T stainless steel construction for food grade applications.
  
  
• Chain and sprocket drive with gear reducer (arrived missing motor). Call 315-589-4511 to discuss your motor voltage specifications.
  
  

As of this writing, this paddle blender / paddle mixer is in stock at ALARD, needing a motor, but otherwise in GOOD condition and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food process mixing and blending equipment needs.

ALARD item reference #: Y4305

URSCHEL MODEL M DICER...

A two-dimensional vegetable and meat cutter designed for dicing, strip cutting, or shredding a variety of products through a wide range of sizes. This versatile dicing machine, strip-cutter, and shredder is ideally suited for cutting beef, pork, poultry or fish through a wide temperature range from fresh chilled to hot cooked. Also manufacturer recommended as a leafy greens chopper for collard greens, kale, leeks, mustard greens, and spinach. This versatile machine is also recommended for cutting other food products into strips or squares including fruit leathers, flat breads, tortillas, pita chips, brownies, and croutons. This is a high-volume cutting machine that operates continuously at high production capacities, and is designed for easy cleanup and maintenance.

Manufacturer SPECIFICATIONS:

• Infeed thickness of up to 1 inch (25.4mm).
  
  
• Circular knife cuts from 3/16 to 1.5 inches (4.8mm to 38mm).
  
  
• Crosscut knife cuts from 1/8 inch to 3 inches (3.2mm to 76.2mm).
  
  
• STRIP CUTS can be made by removing the crosscut knife spindle. The length and thickness of the strips will depend on the size of the original product.
  
  
• SHREDS - many types available for applications such as cooked pork, cooked beef, or cooked chicken, in medium, long or fine shreds.

FEATURES:

• This machine comes with 3/8 inch feed drum and 1/4 inch crosscut spondle.Other cutting parts are available from the manufacturer: --CALL 315-589-4511 to discuss your particular cutting specifications.
  
  
• 10 inch wide feed belt.
  
  
• Includes factory stainless steel operator control panel with safety interlock system.
  
  
• USDA food grade construction, including stainless steel cutting spindles, tubular support frame, guards, shrouds, infeed hopper and discharge chute.
  
  
• 5HP 208 / 230 / 460 volt 3 phase drive motor.
  
  

As of this writing, this Urschel M DICER is having finishing touches applied in our shop from being newly refurbished, and is available in EXCELLENT operational, mechanical, electrical, and cosmetic condition, available for practically immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial food processing cutting equipment needs.

Alard item reference #:Y4612

FOOD GRADE METAL DETECTOR, 16x4 opening,
with conveyor belt, Fortress Phantom...

DEMO VIDEO
Food METAL DETECTOR with conveyor belt, 6x4 opening, Fortress Phantom Y3481
from Alard Equipment Corporation.

A reconditioned Fortress Phantom food process metal detection system with a new conveyor for in-line industrial food process metal detection, with 16 inch wide by 3 7/8 inch high usable aperture opening with belt transfer through-conveyor belt in place...

FEATURES:

• Fortress Phantom model metal detection search head with epoxy painted aluminum enclosure, and:
  
  
  • 16 inch wide by 5 inch overall aperture opening (3 7/8 inch high by 16 inches wide usable opening with belt in place).
    
    
  • Integral touchpad operator control panel with display and LED indicator lights.
    
    

• NEW stainless steel belt-transfer through-conveyor with:
  
  
  • 76 inch long by 13.75 inch wide interlocking plastic chain type belt.
    
    
  • Belt stop alarm REJECT system, triggers buzzer alarm and stops the belt on contaminated product detection. Other reject configurations are available, CALL 315-589-4511 to discuss your specific food process metal detection application requirements.
    
    
  • Tubular stainless steel conveyor frame.
    
    
  • Anti-static UHMW plastic conveyor bed.
    
    
  • IP-65 stainless steel motor enclosure, with corrosion resistant aluminum gear reducer.
    
    
  • New gasketed fiberglass control panel with on-off switch, reject system reset and variable speed control.
    
    
• Left to right product flow from the the operator controls position.
  
  
• Single 110 volt single phase electrical input (standard household current).
  
  

As of this writing, this refurbished METAL DETECTOR with NEW belt-conveyor is in stock at Alard, in EXCELLENT operational, electrical, mechanical, and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial process metal detection system needs.

Alard item reference #:Y3481