A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

February 2021 Archives

Grove Dale FliteFeeder 2-stage TROUGH-BELT FEEDER, Y4634

Dual-stage TROUGH BELT FEED CONVEYOR, 7.5 feet long...


y4634_crop_email.jpg


Grove Dale FLITEFEEDER Model TB62L TROUGH BELT FEEDER. A two-stage trough belt for increasing spacing between food products to feed downstream equipment in an industrial food processing environment. Also known as a speed-up belt. Ideal as a feeder belt for Urschel cutting machines such as the Urschel OV, OC, and / or Urschel VSC segment cutter; et al. Especially well suited for elongated products such as pickles / cucumbers, carrots, celery, zuccini, okra, rhubarb, pepperoni sausage, and other fruit and vegetable items 4 inches or less in diameter. Similar to a Magnuson speedup belt model FF trough-conveyor belt product separator and feed belt.


FEATURES:

  • Side-by-side belts in V-trough configuration, in two sections one-after-the-other, specifically to keep product aligned and centered while increasing spacing between products as they are fed to a cutter or other packaging or processing machine:

    • y4634a_crop_email.jpg1st V-belt section / stage is 62 inches long.

    • 2nd V-belts stage / section is 48 inches long.

    • This V-belt feed conveyor is 7 feet 7 inches long from end to end.

  • Tubular stainless steel pedestal legs with 4 inch threaded rod adjustable feet.

  • Food grade sanitary stainless steel construction.

  • SEW (Eurodrive) .75 HP 208 / 230 / 460 volt 3 phase constant speed drive motor.


As of this writing, this speedup belt is in stock at Alard, in EXCELLENT condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial food food process feed conveyor need.


Alard item reference #:Y4634

Alard water-jet fruit and vegetable WASHER, Y4262

Alard TURBULENT FLOW JET WASHER,
leafy green, fruit and vegetable WASHER FLUME,
food grade stainless steel...


y4262_crop_email.jpg


An AGITATED IMMERSION WASH SYSTEM, wash and chill flume, with water-jet agitation for gentle but active washing for pre-cut fruits and vegetables, including cut or whole leafy greens, including delicate leaf products like spinach, baby spinach, spring mix and other pre-cut produce food products.



FEATURES:

  • This spiral-flow WASH FLUME is 11 feet long by 31 inches wide with agitating water jets all along the left-side near the bottom to provide spiral water flow for gentle immersion washing of delicate food products.

  • y4262x_crop_email.jpgThe wash tank overflows onto a 5 foot long by 30 inch wide ELEVATING DISCHARGE CONVEYOR with an interlocking chain type belt with fine perforations to allow the water to pass through while discharging the dewatered product onward.

  • The conveyor is powered by a .5 HP stainless steel shrounded motor with an aluminum shrouded gear reducer.

  • The water falls through into a stainless steel catch and balance tank, with a new Thomsen model 8 stainless steel RECIRCULATION PUMP with 7.5 HP motor.

  • Check valve included to keep the wash tank water from draining into the wash tank when the pump is shut off.

  • All pipe fittings / connections are USDA food-grade sanitary.

  • y4262s_crop_email.jpgAll food-grade sanitary stainless steel construction.

  • The water jet nozzles are removable for sanitation.

  • All drives 208/230/460 volt 3 phase electrical input.

As of this writing, this spiral-flow washer is NEW IN STOCK at Alard, in fully assembled and available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your fresh-cut produce packing and process equipment needs.


Alard item reference #: Y4262

T.S. Designs Junior, Wash and Chill WASHER-COOLER, Y4594


IMMERSION WASHER-CHILLER,
dip tank, with CONVEYOR belt discharge,
all stainless steel...

y4594l_crop_email.jpg



T.S. DESIGNS JR. WASH & CHILL, manufacturer recommended for use on almost any produce product, whether whole or pre-cut fruit or fresh-cut vegetables. Designed as a compact washing and chilling system to provide maximum utility in a small footprint.



FEATURES:

  • 78 inch long by 24 inch wide by 28 inch deep turbulent wash tank.

  • Multi head spray system over the wash tank to assure submersion and uniform exposure to the cooling water and / or sanitizing or preservative solution.

  • 18 inch wide perforated food grade plastic mesh discharge conveyor with variable speed control for just the right wash.

  • Includes recirculation pump with stainless steel motor.

  • Side mounted .025 inch hydrosieve screen effectively filters wash water of leaves, stems, fines, and other debris resulting from the washing process.

  • 36 inch high inheed, 40 inch discharge height.

  • Conveyor tilts / lifts out for ease of sanitation.

  • y4594o_crop_email.jpgForty (40) pass 1 inch diameter by 6 foot long stainless steel chill lines - previously used for FREON but could be plumbed for chilled water or glycol.

  • All sanitary stainless steel construction.

  • 208 / 230 volt 3 phase electrical input.

  • Very late model, current state of the art cooler-washer system.


As of this writing, this turbulent cooler-washer is in stock at ALARD, in EXCELLENT condition and available for timely shipment.


CALL 315-589-4511 to confirm availability and discuss your food processing needs.


ALARD item reference #: Y4594

Vanmark ROTARY WASHER, Y4646


FRUIT and VEGETABLE TUMBLE WASH REEL / DEWATERING DRUM,

food grade, stainless steel...

y4646g_crop_email.jpg

A Vanmark Rotary Washer / drum washer / reel washer, screening reel, for dewatering, size grading, fines removal, scalping, and washing of root crop vegetables, and/or solids separation and water recovery from sliced, diced, or fresh-cut / pre-cut food products such as beets, carrots, cucumbers, horseradish, potatoes, peppers, radishes and more...

FEATURES:

  • 36 inch diameter by 66 inch long washer reel.

  • Wire mesh reel with 1/4 inch diameter wire and 3/16 inch square openings.

  • Four (4) 2 inch high flights inside of the reel to promote product tumbling.

  • Suitable for use as a DRY DIRT REEL or WASH REEL -- equipped with spray bar for washing / rinsing application.

  • Product feed chute.

  • y4646f_crop_email.jpgAdjustable UHMW discharge plate (original factory design, but could be modified for other needs).

  • Full bottom tank.

  • Food grade sanitary stainless steel construction.

  • Stainless steel control box with variable speed controller.

  • Top mounted chain drive 3/4 HP stainless steel motor.

  • 208 / 230 volt 3 phase electrical input.


As of this writing, this tumble washer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular root crop washing equipment needs.

ALARD item reference #: Y4646



100 gallon LIQUEFIER, jacketed, high-shear mixer, 15HP, Y4676

100 GALLON LIQUEFIER, 15HP...


VIDEO DEMO
100 gallon LIQUEFIER, 15HP, jacketed,
Breddo Likwifier Y4676

from Alard Equipment Corporation.


A Breddo Likwifier 100 gallon jacketed Liquifier, manufacturer recommended for dissolving and dispersing virtually any food product in low to medium viscosity liquid, including stabilizing gums, synthetic thickeners, fours, cocoas, yeast, powdered ingredients such as powdered eggs, starches, condiments, caseinates, juice concentrates, food purees,whey solids, milk solids, and to emulsify products such as salad dressings, fillings, ice cream mixes, sauces, and many other items. It is also used for reconstitution of dairy products and reestablishment of soluble products, preparation of starch and hydrocolloid solutions.


A high-shear mixer, emulsifier, blender,
this liquifier FEATURES:

  • 38.5 inch by 38.5 inch by 23 inch deep square body jacketed mixer vessel.

  • Low pressure jacket for heating and cooling.

  • (New) center bottom high-shear impeller with new seals.

  • 2 inch bottom side outlet with sanitary Tri-Clamp connection.

  • Top center manway with hinged cover.

  • Multiple top inlets, with vent.

  • Adjustable threaded stainless steel foot pads on stainless steel legs.

  • All food grade USDA sanitary stainless steel construction.
  • 15 HP 575 volt 3 phase direct drive motor powers the impeller, voltage can be changed or run with a transformer. Call 315-589-4511 to discuss your voltage specification.


As of this writing, this Breddo liquefier is in stock at Alard, in EXCELLENT operational condition, mechanical, and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial food process high-shear mixing need.

Alard item reference #:Y4676

Food process METAL DETECTOR with conveyor, 20x8, Y4768

FOOD PROCESS METAL DETECTOR with BELT CONVEYOR,
21x8, 304 stainless steel...


DEMO VIDEO
Food process METAL DETECTOR with conveyor belt, 20x8,
Cassel Metalshark, Y4768
from Alard Equipment Corporation.


A Cassel Metalshark2 MULTI-FREQUENCY washdown sealed food grade sanitary 304 stainless steel conveyorized metal detection system for industrial process applications...

FEATURES:

  • Approximately 8 inch (203mm) high by 20.6 inch (525mm) wide net USABLE aperture opening with the conveyor belt in place.

  • The 304 stainless steel frame washdown belt transfer conveyor has a 70.5 inch (1791mm) long by 18.5 inch (470mm) wide interlocking plastic chain type belt, running at a 31.5 inch (800mm) working height, with adjustable feet allowing +/-4 inch (100mm) height adjustment.

  • The thru-conveyor is complete with a photo-eye product sensor, a belt-stop alarm reject configuration, and a variable speed control for the 110 volt single phase drive, adjust able from 16 to 75 feet per minute (approximately 5 to 23 meters per minute) belt speed.

  • A food grade metal detector specifically built for food processing and other industrial production line metal detection applications. All food grade / USDA sanitary hose-wash-down stainless steel construction (IP-67/NEMA 6 search head enclosure, IP-65/Nema4,4x,6,12 & 13 control enclosure).

  • The search head is complete with integral touchpad operator controls with a 5.4 inch color screen, including RS-232 and RS-485 serial data acquisition ports, and ethernet data interface, in a stainless steel enclosure. Optional data logging software is available for tracking and reporting for HACCP and other quality assurance and certification regimes.

  • 110 volt single phase (standard household current) electrical input.

  • FOUR FREQUENCY LEVELS (35kHz, 75kHz, 150kHz, and 300kHz), allowing for optimal sensitivity across an exceptionally wide range of products / product types (wet, dry, salty, meat, fruits, vegetables, fresh, frozen, hot, cold, etc) allowing for maximum versatility with the widest range of products. The optimal frequency is automatically set by the system in "product learn" mode to maximize sensitivity / minimize false rejects with your specific product.

  • Sensitivity varies depending on product run, and frequency setting (determined by product characteristics), especially where wet, salty, or acidic products that are electrically conductive introduce "product effect" into the equation.

  • Quick teach feature learns new products in 4 to 7 passes.

  • The control unit allows for 120 product presets, where product presets save the frequency setting with the other tuning data.

  • Single control board technology with all control electronics on one circuit board maximizes reliability, and minimizes maintenance expenses.

  • 304 stainless steel search head and conveyor construction.

  • NEW EQUIPMENT - Includes a 2 year manufacturer warranty on hardware / parts.


As of this writing, this conveyorized metal detection system is in stock NEW at Alard, ready to go and available for immediate shipment.


CALL 315-589-4511 to confirm availability, and to discuss your particular industrial product inspection needs.


Alard item reference #:Y4768

Bock Northstar FP-90 SPIN DRYER, Y4064


RECONDITIONED SPIN DRYER, Bock Model FP-90.


y4064a_crop_email.jpg

The North Star Engineered Products (NSEP) Bock FP-90 Centrifuge is a food grade stainless steel centrifugal drying machine for drying washed fruits and vegetables, including leafy vegetables, whole or cut, in the context of an industrial pre-cut produce packing operation.

FEATURES:

  • 7.36 cubic foot removable basket which measures 30 inches in diameter by 18 inches deep; with a 23 inch top opening.

    • y4064h_crop_email.jpgLouvered basket perforations pull moisture out of the basket and away from the product.

    • Lifting "ears" on each side of the basket provide for overhead winch lift-out and easy swivel-dumping action.

  • Manufacturer rated 130 lb (dry weight) batch capacity, and up to 1,950 lbs of product per hour.

  • Food grade stainless steel product contacts including basket, tank, and base, with painted steel legs.

  • Lid-opening assist cylinders (new).

  • y4064p.jpgIncludes (new) operator controls with 10 minute settable timer, and safety interlock system. Machine won't start with lid open, lid locks during spin cycle.

  • Durable hydraulic transmission.

  • Pneumatic brake.

  • 5HP 230/460 volt 3 phase motor..


As of this writing, this REFURBISHED BOCK FP90 spinner is in stock at Alard, in EXCELLENT operational, electrical, mechanical and cosmetic condition, ready to go and available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular fresh-cut / pre-cut produce packing equipment needs.

Alard item reference #:Y4064

ROLLER INSPECTION CONVEYOR grading table, Y4697

ROLLER BED INSPECTION CONVEYOR,
food grade stainless steel...


y4697_crop_email.jpg

A ROLLER GRADING TABLE for sorting, grading, apples, potatoes, onions, tomatoes, peppers, mushrooms as well as other assorted fruits & vegetables of a size and capacity for industrial food processing, food packaging operations. This visual inspection conveyor works to spin and rotate fruits and vegetables as they pass over the rollers, so that these food products can be viewed from all angles, so that spotted, blemished, bruised, or unpeeled products can be picked out and trimmed, separated, or discarded.


FEATURING:

  • All food grade stainless steel frame and guards.

  • 24 inch wide by 50 inch long roller bed area.

  • 2.25 inch diameter PVC rolls 24 inch wide.

  • y4697d_crop_email.jpg5/16 inch spacing between the rolls.

  • 2 inch high sides.

  • 6 inch long sloped infeed.

  • End discharge chute.

  • Open bottom.

  • Approximate 36 inch working height with adjustable threaded foot mounts.

  • Hinged cleanout doors on each side.

  • 1/2 HP drive motor.

  • 208 / 230 volt 3 phase electrical input.


As of this writing, this roller inspection table is in stock at ALARD, in very good condition, available for timely shipment.


CALL 315-589-4511
to confirm availability and discuss your industrial food process inspection, grading, and/or sorting needs.


ALARD item reference #: Y4697

Key Farmco SSR rotary roller SIZE GRADER, Y4604

KEY / FARMCO SSR ROLLER GRADER,
food grade, stainless steel...

y4604g_crop_email.jpg

The Farmco Key model SSR sizer, sliver-remover, is manufacturer recommended to transfer and classify product efficiently while removing field debris, broken pieces, seeds, juice, fines,slivers, chips, and other targeted material. Features on-the-fly tuning / size-adjustment for precision sizing and grading; dejuicing and deseeding; and removing debris. Operates efficiently for both small whole products and pieces such as cubes, dices, slices, wedges, fries, spears, sticks, and julienne strips...


FEATURES:

  • Smooth infeed pan.

  • Seven (7) 5-inch diameter stainless steel rolls.

  • Roller bed measures 48 inch wide by 36 inch long.

  • Sieve range of approximately 1/8 inch to 1/2" inch.

  • Manual crank adjustment of sieve for sieve size adjustment on the fly.

  • Overhead spray nozzles on both sides of bed.

  • 8 inch long dimpled discharge pan.

  • y4604b_crop_email.jpg1 HP stainless steel drive with gear reducer to 350 RPM.

  • Equipped with an automatic oiler.

  • All food grade sanitary stainless steel construction.

  • 460 volt 3 phase electrical input.



As of this writing, this Roller Grader is in stock at ALARD, in EXCELLENT condition, available for immediate shipment.


CALL 315-589-4511 to confirm availability, and to discuss the details of your particular food product grading equipment needs.


ALARD item reference #: Y4604

Rietz Bepex RE-24 EXTRUCTOR, Y4800


RIETZ EXTRUCTOR Model RE-24,
frozen block grinder, 75HP...


VIDEO DEMO
Y4800 Reitz_EXTRUCTOR RE-24
from Alard Equipment Corporation.

A Rietz Bepex RE-24-K9E933 EXTRUCTOR industrial pulverizer machine, engineered with slow speed and high torque for fracturing, crushing, grinding and tearing large frozen blocks or barrels of bulk materials, such as animal products, meats, cheese, fruits and/or vegetables...

FEATURING:

  • 29.5 inch wide by 27 inch long by 41 inch deep cut chamber.

  • 24 inch diameter rotor.

  • 16-spoke discharge plate / die plate / extrusion plate.

  • 101 inch high infeed, 58.5 inch discharge height.

  • Food grade sanitary stainless steel product contact surfaces with heavy stainless steel support frame.

  • 75 horsepower chain drive motor..

  • 460 volt 3 phase electrical input.


As of this writing, this Rietz Bepex EXTRUCTOR is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, ready-to-go and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food process cutting, grinding, pulverizing & particle reduction size needs.

ALARD item reference #: Y4800

CHILL FLUME, washer, conveyor, for fruits and vegetables, Y4530

CMI FRUIT AND VEGETABLE WASH AND CHILL FLUME,
50 foot long, all stainless steel...


y4530_assem_c_edit_email.jpg
Click on picture to see LARGER version.

.

A CMI Equipment S-shaped open flume washer-cooler, complete with Key Iso-Flo dewatering shaker, and water recirculating pump. This gravity-flow wash and chill flume provides for gentle product handling to prevent bruising and reduce damage, as can be experienced with other closed flume systems, when running food products such as lettuce, cabbage, spinach, spring mix, pepper, onions, carrots plus other fresh cut produce. For quick chilling, washing and/or sterilizing as part of your food processing production line. Food grade all stainless steel construction with all open surfaces, makes for easy cleaning and sanitation. Also versatile, for shredded, choppped, whole leafy greens, sliced, diced, even whole fruits and vegetables. With no moving parts aside from the centrigugal recirculation pump


FLUME FEATURES:

  • 11 inch wide by 50 foot long four (4) pass serpentine flume trough in an S-configuration, presently cleanly separated into two sections for shipping purposes.

  • 64 inch working height.

  • 30 inch wide by 72 inch long tapered infeed.

  • y4530_assem_a_crop_email.jpgSix (6) forward facing water nozzles at infeed end with hinged deflector.

  • Two (2) sets of six (6) water nozzles located along the trough bottom to propel product forward.

  • Stone / sand trap on final / discharge leg.

  • 10.5 foot wide by 15 foot long overall footprint.

  • All food grade sanitary stainless steel construction.

  • Previously used as a chilling flume fed with chilled plant water, so it came to Alard without water chilling components. As of this writing we have a matching CMI chill tank (Y1572) available in stock. Call 315-589-4511 for more information.

  • Product can be cut directly above the infeed, or another piece of equipment such as a belt or shaker (available separately) can be used to feed the flume, CALL 315-589-4511 to confirm availability, and to tell us how you'd like your pre-cut produce wash, cut and dry laid out.



KEY ISO-FLO VIBRATING DEWATERING SHAKER FEATURES:

  • y4530_assem_zj_crop_email.jpg30 inch wide by 66 inch long conveyor pan with...

    • Dimpled / rigidized stick resistant stainless steel horizontal contact surfaces.

    • 12 inch long solid infeed.

    • 30 inch long removable screen with 3/4 inch diameter perforations.

    • y4530e_shaker_crop_email.jpgScreen held in place by quick-relase hook latches for rapid toolless changeover.

    • 24 inch long discharge which narrows to a 14 inch wide half-moon shaped discharge outlet.

    • 6 inch high smooth flat sides.

    • 51 inch high infeed / 45 inch discharge height.

  • New style Key Iso-Flo eccentric with NEW 1 HP drive motor.

  • All food grade sanitary stainless steel construction.

  • 208 / 230 / 460 volt 3 phase electrical input.



CENTRIFUGAL WATER RECIRCULATION PUMP FEATURES:

  • y4530_assem_ze_crop_email.jpg5 inch flanged inlet / 4 inch Triclamp outlet.

  • 3 HP stainless steel shrouded motor.

  • 208/230/460 volt 3 phase electrical input.


As of this writing, this water flume conveyor is in stock at ALARD, in GOOD condition and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food process product cooling needs.

ALARD item reference #: Y4530

Used plastic basket SPIN DRYER, 32 gallon basket, Y4809

PLASTIC BASKET SPIN DRYER,
32 gallon basket, up to 75 lbs capacity,
food grade stainless steel...

y4809k_crop_email.jpg


TS Designs ISO-Dryer SPIN DRYER for industrial fresh-cut and pre-cut produce processing and packaging lines. This food grade stainless steel centrifugal dryer is an essential component of any fruit or vegetable cut, wash and dry production process.



FEATURES:

  • Comes with one white Rubbermaid Brute type 32 gallon plastic basket so it can be loaded and unloaded by hand, withOUT neccesity of overhead winch. Baskets are available new in a variety of colors and perforation sizes; --Call 315-589-4511 for pricing to your specification.

  • y4809zi_crop_email.jpgThis salad spinner is manufacturer rated for up to 75 lb loads.

  • Gas assist lid.

  • Stainless steel shrouded motor.

  • Stainless steel control box with safety interlock system, speed selector, start, stop and emergency stop.

    • Settable timer (inside the control box).

    • y4809h_crop_email.jpgCentrifuge control system provides for electronic acceleration and dynamic braking to reduce cycle times for maximum productivity.

  • Food grade sanitary stainless steel construction.


As of this writing, this plastic basket centrifugal drying system is in stock at Alard Equipment Corp in EXCELLENT operational, mechanical, electrical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular fresh-cut food equipment needs.


Alard item reference #: Y4809

Demo VIDEO of 6-inch PIPELINE METAL DETECTOR Y4816

VIDEO DEMONSTRATION
6-inch PIPE METAL DETECTOR,
8 inch overall opening, washdown,
food grade sanitary stainless steel...

VIDEO DEMO
6-inch PIPE metal detector, food grade, washdown, stainless steel,
Alard item Y4816
from Alard Equipment Corporation.

A stainless steel Cassel inline metal detector with pneumatic divert valve for pumped food products including meats, patees, sauces, pastes, slurries, creams, oils, purees, salsa, refried beans, wet salads, and other viscous or liquid food products hot or cold. Also useful for vacuum packed applications where product is pumped to avoid oxidation. For food safety metal detection on food products as they travel through process pipelines.


FEATURES
:


  • Has 6 inch diameter through-tube, 36 inches long, of anti-static UHMW plastic running through an 8 inch diameter opening in the metal detection sensor-head.

  • All USDA sanitary thread inlet / outlet connections / fittings.

  • y4816n_crop_email.jpgPneumatic reject valve -- straight-through good product discharge, down-facing reject discharge.

  • Cord connected factory control box rated for IP66 pressure hose WASH-DOWN applications.

  • Digital touch-pad operator controls.

  • All food grade sanitary stainless steel construction.

  • Metal detection head, divert valve & control panel mounted together on a common stainless steel frame.

  • y4816k_crop_email.jpg110 volt single phase (standard household current) electrical input.

  • Compressed air required for automatic reject valve.

As of this writing, this industrial food process pipeline metal detector is in stock at ALARD, in EXCELLENT operational, electrical & cosmetic condition, available for immediate shipment as configured.


CALL 315-589-4511 to confirm availability and discuss your food process metal detection needs.

ALARD item reference #: Y4816

About this Archive

This page is an archive of entries from February 2021 listed from newest to oldest.

January 2021 is the previous archive.

Find recent content on the main index or look in the archives to find all content.

Monthly Archives


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)