CORNELL 6-inch HYDRO TRANSPORT
STAINLESS STEEL FOOD PUMP
with STAINLESS STEEL FEED TANK
and MOTOR-DRIVE

Alard item Y4820 six-inch stainless steel food pump.

Food grade pump-in-water conveyor / flume kit including Cornell 6-inch stainless steel food pump, feed tank, and drive on common stainless steel frame. Pump whole or cut food products via pipe flume or open sluice, to cool, wash, rinse, sanitize, and/or apply preservative solutions while conveying horizontally and/or vertically for long or short distances. Ideal for food processing applications such as fruit and vegetable washing, fresh-cut / pre-cut produce hydro-cooling and chilling applications, and/or pre-heating prior to cutting, peeling, etc; including shredded lettuce and cabbage, cut romaine, whole or cut potatoes, french fries, potato chips, live fish (!), cranberries, carrots, apples, cherries, peas, broccoli, crayfish, shrimp, lettuce, green beans, nuts, peppers, olives, cucumbers, raisins, beans, corn, peaches, beets, oranges and more.

FEATURES:

• Cornell 6NHPP-F16K-SS stainless steel hydro flow food pump with stainless steel impeller, six-inch inlet and outlet. Epoxy painted iron body pump also available -- CALL 315-589-4511 to discuss your specific requirements.
  
  
• Manufacturer rated for solids handling ability for product up to 4 inch diameter by 6 inches in length. Larger diameter pumps are available for larger product sizes..
  
  
• Expanded volute PP series pump for the ultimate in gentle handling of delicate food products. So gentle the manufacturer rates for pumping live fish!
  
  
• Specifically designed and built for industrial food processing application use with TONS-per-HOUR product throughput capacity.
  
  
• Manufacturer recommends 2 or 3 to 1 ratio of water to product, with your product capacity determined by horsepower, RPM and total dynamic head resistance. Pump curves are available by request -- CONTACT ALARD to discuss your specific application requirements.
  
  
• Stainless steel in-feed tank 41 inches long by 33 inches wide by 19 inches deep; with a 35 inch product infeed height and 18.5 inch height to center of return flange.
  
  
• Tank has a 2 inch inner diameter NPT threaded (female) cleanout drain near the return flange end at a 14.5 inch discharge height.
  
  
• Pump, tank & drive are mounted together on a tubular stainless steel frame.
  
  
• 7.5HP 1,765 RPM 208/230/460 volt 3 phase drive. Other RPM and/or horsepower drives, optional variable speed controls, and / or drive-ratio setups are available -- TELL US what YOU need to pump food products in water.
  
  
• NEW with two (2) year manufacturer warranty.

As of this writing this NEW Cornell food pump with tank and motor is in stock at ALARD, fully assembled, ready-to-go and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food process bulk product conveying, chilling, cooling, sanitizing and/or pumping equipment needs.

ALARD item reference #: Y4820

URSCHEL Model H DICER,
cube cutter, strip cutter, slicer.

A refurbished Urschel dicer. The Urschel Model H is a three-dimensional continuous cutting machine, manufacturer rated for product input size up to 5.5 inches (140mm) in any dimension. Manufacturer recommends for uniform dices, strips, and slices from a variety of products, including potatoes, beets, lettuce, cabbage, broccoli, cauliflower, sweet potatoes, squash, carrots, mushrooms, turnips, cantaloupe, endive, tomatoes, cucumbers, horseradish, apples, grapefruit, citrus peel, papaya, pineapple, peaches, celery, rutabagas, melon rind, and many other foods; producing clean, uniform, high-quality tons-per-hour output...

THREE CUTTING DIMENSIONS:

• Slice thickness from 1/8 inch (3.2 mm) up to 1 inch (25 mm) - knob adjustable.
  
  
• Circular knives from 1/8 inch (3.2 mm) to 3 inches (76.2 mm) - spacers and number of knives determine cut size.
  
  
• Crosscut knife spindle:spacing from 3/4 inch (19.1mm) up to 1.75 inches (44.5mm) - change part.
  
  
• By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel HA dicer can also cut strips (two-dimensional) such as for French fries, and slices (single dimensional cut).
  
  
• Cuts uniform cubes / dices up to 1 inch square.
  
  
• An optional "G" kit is available to extend the range of this machine to overlap with the Urschel Model G.
  
  
• We can otherwise complete this machine with cutting parts to buyer specifications - Call 315-589-4511 to discuss your particular food process cutting machine needs!

FEATURES:

• 7 inch diameter slice shell opening.
  
  
• All food grade stainless steel construction including spindle arms, guards, shrouds and tubular stainless steel frame.
  
  
• Stainless steel control box with safety interlock system.
  
  
• 2 HP belt drive.
  
  
• 208 / 230 volt 3 phase electrical input.
  
  

GRADER REEL / SLIVER REMOVER, 24x36,
food grade, stainless steel...

A Charlie's Machine Model RDS size-grader reel, rotary drum fruit and vegetable grading reel, for size grading, size sorting, sliver removal, fines removal, grading out shorts, solids separation, dewatering and/or feeding downstream components...

FEATURES:

• 24 inch diameter by 36 inch long grading drum with...
  
  
  • 3/8 inch round rod.
    
    
  • 3/8 inch sieve.
    
    
• Manually adjustable pitch.
  
  
• 11 inch wide by 22 inch long infeed chute with 4.5 inch high sides.
  
  
• 19 inch wide by 36 inch long solid underpan.
  
  
• 52 inch high infeed, 35 inch discharge height.
  
  
• 1/4 HP chain drive trunnion with variable speed control.
  
  
• All food grade sanitary stainless steel including tube frame.
  
  
• On casters for portability.
  
  
• 110 volt single phase (household current) electrical input.
  
  

MAGNUSON / CCM CORN CUTTER,
manual feed, electric, all stainless steel...

A Magnuson Model 2-E-HC hand fed corn kernel cutter is a space saving, self-contained, all stainless steel, low cost alternative to larger automatic fed systems. Ideal for batch processing, rework, and moderate volume production.

FEATURES:

• 50 inch long single flat belt infeed belt (new) with 32 inch open placement area.
  
  
• New rubber infeed cob gripping rolls and spike rolls (Note: Pictures show both the old and new rubber grippers).
  
  
• Spring loaded No. 2 cutting head included.
  
  
• Safety interlock switch on cutting head guard/cover.
  
  
• 43 inch high infeed, 30.5 inch kernel discharge opening height.
  
  
• Designed to self-clear jams.
  
  
• Lubrication cluster for ease of maintenance.
  
  
• Stainless steel control box with On/Off, Reverse & E-stop switches.
  
  
• All food grade sanitary stainless steel construction.
  
  
• 5 HP drive motor with variable speed control.
  
  
• 230 volt 3 phase electrical input.

ALARD item reference #: Y4670