A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

STAINLESS STEEL FOOD PUMP with feed tank and drive, Y4820

CORNELL 6-inch HYDRO TRANSPORT
STAINLESS STEEL FOOD PUMP
with STAINLESS STEEL FEED TANK
and MOTOR-DRIVE

y4820d_crop_email.jpgAlard item Y4820 six-inch stainless steel food pump.

Food grade pump-in-water conveyor / flume kit including Cornell 6-inch stainless steel food pump, feed tank, and drive on common stainless steel frame. Pump whole or cut food products via pipe flume or open sluice, to cool, wash, rinse, sanitize, and/or apply preservative solutions while conveying horizontally and/or vertically for long or short distances. Ideal for food processing applications such as fruit and vegetable washing, fresh-cut / pre-cut produce hydro-cooling and chilling applications, and/or pre-heating prior to cutting, peeling, etc; including shredded lettuce and cabbage, cut romaine, whole or cut potatoes, french fries, potato chips, live fish (!), cranberries, carrots, apples, cherries, peas, broccoli, crayfish, shrimp, lettuce, green beans, nuts, peppers, olives, cucumbers, raisins, beans, corn, peaches, beets, oranges and more.



FEATURES:

  • Cornell 6NHPP-F16K-SS stainless steel hydro flow food pump with stainless steel impeller, six-inch inlet and outlet. Epoxy painted iron body pump also available -- CALL 315-589-4511 to discuss your specific requirements.

  • Manufacturer rated for solids handling ability for product up to 4 inch diameter by 6 inches in length. Larger diameter pumps are available for larger product sizes..

  • Expanded volute PP series pump for the ultimate in gentle handling of delicate food products. So gentle the manufacturer rates for pumping live fish!

  • Specifically designed and built for industrial food processing application use with TONS-per-HOUR product throughput capacity.

  • Manufacturer recommends 2 or 3 to 1 ratio of water to product, with your product capacity determined by horsepower, RPM and total dynamic head resistance. Pump curves are available by request -- CONTACT ALARD to discuss your specific application requirements.

  • y4820g_crop_email.jpgStainless steel in-feed tank 41 inches long by 33 inches wide by 19 inches deep; with a 35 inch product infeed height and 18.5 inch height to center of return flange.

  • Tank has a 2 inch inner diameter NPT threaded (female) cleanout drain near the return flange end at a 14.5 inch discharge height.

  • Pump, tank & drive are mounted together on a tubular stainless steel frame.

  • 7.5HP 1,765 RPM 208/230/460 volt 3 phase drive. Other RPM and/or horsepower drives, optional variable speed controls, and / or drive-ratio setups are available -- TELL US what YOU need to pump food products in water.

  • NEW with two (2) year manufacturer warranty.


As of this writing this NEW Cornell food pump with tank and motor is in stock at ALARD, fully assembled, ready-to-go and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food process bulk product conveying, chilling, cooling, sanitizing and/or pumping equipment needs.

ALARD item reference #: Y4820


Monthly Archives


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)
 

About this Entry

This page contains a single entry by Michael C. Shults, Alard Equipment Corp published on September 29, 2021 10:03 AM.

Urschel model H DICER, strip cutter, Y4617 was the previous entry in this blog.

Solbern PTF-DP volumetric particulate tumble FILLER, Y4616 is the next entry in this blog.

Find recent content on the main index or look in the archives to find all content.