DEMO VIDEO
Refurbished URSCHEL Model J-A DICER,
STRIP CUTTER, meat cube cutter, greens chopper, crouton cutter, CUTTING biomass...

VIDEO DEMO
Urschel J-A DICER, strip-cutter, chopper
cutting biomass, Alard item Y4819
from Alard Equipment Corporation.

The Urschel J-A DICER is a belt fed two-dimensional cutting machine for industrial food processing applications, manufacturer recommended for food products up to 1/2 inch (13mm) thick at infeed, such as spinach & greens, peppers, citrus peel, celery, broccoli, bread (e.g. croutons), brownies, parsley, frozen tempered meats and more.

Manufacturer literature specifies this model for cutting square or rectangular dices:

• Firm products can be fed through the machine up to 3/8 inch (9.5mm) thick with standard parts, 1/2 inch (12.7mm) thick firm products with a special optional feed drum, and this model can accept thicker products depending on the product's degree of compressibility. CALL 315-589-4511 to discuss your specific industrial food process cutting specification.
  
  
• Circular knives can be spaced for cuts from 3/16 inch (4.8mm) to 2 inches (51mm).
  
  
• Crosscut spindles available for cuts from 1/4 inch (6.4mm) to 3 inches (76mm).
  
  
• Strip cuts can be made by removing the crosscut knife spindle from the machine, with the length and thickness of the strips depending on the size of the original product.
  
  

This machine FEATURES:

• 6 inch (152.4mm) wide feed belt and cutting spindles.
  
  
• Most standard cut sizes are available -- CALL 315-589-4511 to discuss YOUR industrial food process cutting specification.
  
  
• Equipped with belt cleaner / scraper assembly.
  
  
• Aftermarket safety interlock system with fiberglass NEMA 4 control box.
  
  
• Food grade sanitary stainless steel product contact surfaces, guards, shrouds & tubular support frame.
  
  
• 5HP drive motor.
  
  
• 208 / 230 volt 3 phase electrical input.

As of this writing, this reconditioned Urschel J-A dicer / strip cutter / greens chopper is in stock as ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, needing only to be fitted with selected cutting spindles prior to shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

ALARD item reference #: Y4819

DEMO VIDEO
METAL DETECTOR with BELT CONVEYOR,
with PUSH-OFF REJECT, 17x7, food grade...

DEMO VIDEO
Food Grade METAL DETECTOR
test run on frozen cookies,
from Alard Equipment Corporation.

A refurbished Goring Kerr Model DSP2 metal detector head, with pneumatic push off reject, on a NEW stainless steel thru-conveyor. A food grade belt transfer metal detection system for food processing and/or other industrial process applications...

FEATURES:

• 6.75 inch high by 17 inch wide net USABLE aperture opening with the conveyor belt in place.
  
  
• NEW stainless steel belt-transfer through-conveyor with a 72 inch long by 15 inch wide interlocking plastic chain type belt.
  
  
• Pneumatic PUSH-OFF reject with 10 inch stroke.
  
  
• 4 inch high UMHW guide rails.
  
  
• Epoxy-painted aluminum search head enclosure.
  
  
• Integral digital operator controls for metal detection head.
  
  
• 36.5 inch working height on threaded rod height-adjustable casters (two locking).
  
  
• 1/3 HP conveyor drive with variable speed control.
  
  
• 110 volt single phase (standard household current) electrical input.

This refurbished METAL DETECTOR is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & pneumatic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food inspection needs.

ALARD item reference #: Y4903

VOLUMETRIC LIQUID PISTON FILLER...

Hinds-Bock Single piston FILLER, 32 ounce fill, food grade, stainless steel,
Alard item Y5065

The Hinds Bock single piston filler is a classic workhorse of the food processing industry. Easy to clean & operate, versatile and gentle on product. Large port opening allows filling of chunky ingredients without crushing. Accurate filling and depositing into trays, bottles, cans, pouches, or in use as an ingredient depositor for adding sauces or other liquid food ingredients to other food products. Manufacturer recommended for liquids, semi-solid, or wet particulate products such as salsa, sauces, relish, butters, chocolate, mayonnaise, jams / jellies, oils, and non-food products such as lotions, shampoos, scrubs, cleaners, paint, solvents, oil and other thick but flowable liquid mixtures or slurries.

FEATURES:

• Pneumatically actuated piston with adjustable stroke for up to 33 ounce fills.
  
  
• Large 2 5/8 inch by 2 inch valve inlet port with 1.5 inch diameter discharge openings, allow particulates to pass through..
  
  
• 20 inch diameter by 17 inch high (approximately 10 gallon) infeed hopper with 2.5 inch outlet.
  
  
• Food grade stainless steel product contacts with adjustable-height pedestal frame.
  
  
• Inline air filter / oiler.
  
  
• Comes set for foot-switch activation. Can also be configured to be activated by photo eye or other sensor for semiautomatic or inline automatic operation.

As of this writing, this piston filler is in stock at ALARD, in EXCELLENT condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and to discuss your food processing needs.

ALARD item reference #: Y5065

Fitzpatrick Fitzmill
INDUSTRIAL IMPACT MILL,
12 inch rotor, 25HP,
food grade, stainless steel contacts.

A Fitzpatrick Fitzmill Model DKAS012 comminutor hammermill, with 12 inch diameter rotor, for controlled particle size reduction in food processing applications, food grade, stainless steel product contact surfaces...

FEATURES:

• 11.5 inch wide by 13.25 inch long flanged infeed.
  
  
• Sloped infeed hopper with built-in safety grid, 6 inch by 13 inch opening.
  
  
• Thirty-two (32) stainless steel hammers, tapered on both sides, with reversible shaft and exterior pillow block bearings. Other hammer / knife parts for this comminuting machine are readily available --CALL 315-589-4511 to discuss your specific cutting / grinding milling application.
  
  
• Flange discharge.
  
  
• Stainless steel screen cage beneath hammers / knives determines cut cut size / particle size output -- CALL 315-589-4511 to discuss your particular particle size reduction requirement.
  
  
• Food grade stainless steel product contacts and frame with painted steel frame.
  
  
• 25HP belt drive motor with six (6) belt pulley.
  
  
• 208 / 230 / 460 volt 3 phase electrical input.
  
  

As of this writing, this Fitzpatrick mill is in stock at ALARD, in VERY GOOD operational condition and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food product particle size reduction needs.

ALARD item reference #: Y4918

RIETZ-BEPEX ANGLE DISINTEGRATOR
Model RA-3-12-K-132, 50 HP,
food grade stainless steel
hammermill, grinder...

A 12-inch Rietz DISINTEGRATOR, RA series angled mill, manufacturer recommended for grinding, shredding, delumping, homogenizing, fine dispersing or fine pulping of wet & dry products. For particle size reduction in food grade high-capacity industrial production environments, such as grinding, pureeing, granulating, pulverizing, and wet grinding, in fruit & vegetable processing, nutraceutical, chemical and pharmaceutical applications.

FEATURES:

• 11 inch diameter top infeed.
  
  
• 12 inch rotor diameter.
  
  
• Four (4) sets of blunt hammers.
  
  
• Backing screen with ? inch perforations.
  
  
• 4 inch diameter threaded discharge at 21 inch discharge height.
  
  
• Food grade stainless steel food contacts with painted mild steel base.
  
  
• 50 HP belt drive motor.
  
  
• 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this food grade stainless steel Rietz Bepex disintegrator mill is in stock at ALARD, in EXCELLENT operational mechanical, and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food process particle size reduction needs..

ALARD item reference #: Y5018

FOOD PROCESS METAL DETECTOR with BELT CONVEYOR,
14x6 opening, food grade, stainless steel.

A Fortress Phantom stainless steel belt-transfer metal detector with a 5.75 inch high by 14 inch wide USABLE aperture opening, on a stainless steel conveyor, for product inspection of bagged or boxed products inline after a vertical form-fill-seal machine (VFFS) bagger or other packaging machine. Currently configured with a lowerating decline conveyor belt, to receive the packages from a high discharge and carry them to a lower level for further downstream handling. Available as configured, or could be reconfigured for horizontal,or elevating conveyor configuration.

FEATURES:

• 5.75 inch high by 14 inch wide USABLE detector aperture.
  
  
• Stainless steel detection head.
  
  
• Digital operator control panel.
  
  
• All stainless steel conveyor frame.
  
  
• Metal detector conveyor belt in two-sections, measures 10 inch wide by 12 feet overall length.
  
  
  • 2 foot long ribbed rubber infeed conveyor section with 3 phase variable speed drive, can be run slower than the main conveyor, in order to increase spacing between products so they go through the metal detector head one at a time.
    
    
  • 10 foot long ribbed rubber through-detector belt with 3 phase variable speed drive conveyor section, complete with 110 volt single-phase belt vibrator to settle product in the bag or box after it passes through the metal detector.
    
    
• 7.5 inch infeed height, 48 inch high infeed, 8.5 inch discharge height as configured.
  
  
• Stainless steel control box with 3-phase input variable frequency drive controls for the two conveyor belt drives.
  
  As of this writing, this metal detection system is in stock at Alard in operable condition available for timely shipment as configured, or could be reconfigured by our shop to set the conveyor to run level, or reconfigure the machine as an elevating conveyor configuration.
  
  CALL ALARD at 315-589-4511 to confirm current availability and discuss your particular food process metal detection needs.
  
  ALARD item reference #: Y4952
  
  

GRAVITY FLOW METAL DETECTOR,
10 inch diameter opening,
food grade, stainless steel.

Drop-Thru Metal Detector for food processing applications,
Alard item Y4958

CEIA Food Industry METAL DETECTOR, model THS 21E Series model T/G21E-250-0007 gravity feed free-fall / drop-through metal detection system for industrial manufacturing and packaging process applications...

FEATURES:

• 10 inch diameter by 7 inch long pass through aperture stainless steel search head.
  
  
• Digital touchpad operated control box.
  
  
• 300 kHz frequency for dry products.
  
  
• Currently mounted on (available with or without) a stainless steel frame.
  
  
• All food grade sanitary stainless steel construction.
  
  
• 110 volt single phase (household current) electrical input.
  
  Gravity-fed free-fall metal detection systems are commonly used for free-flowing granular and / or particulate products, as well as sliced, diced, shredded and whole products in food manufacturing and other industrial production applications. Gravity flow metal detectors are commonly mounted under feed hoppers, under mixer / blender discharges, or between scales and form-fill-seal machines, or other types of baggers.
  
  As of this writing, this gravity fall metal detector is in stock at ALARD, in EXCELLENT condition and available for immediate shipment.
  
  CALL 315-589-4511 to confirm availability and discuss your food safety needs.
  
  ALARD item reference #: Y4958