A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

April 2022 Archives

Magnuson NF-24 rolling-cage PEELER, Y4892

24-ROLL continuous ROTATING CAGE PEELER-WASHER with full length metering auger, stainless steel. WALKAROUND VIDEO DEMO.


WALK-AROUND VIDEO
Magnuson NF-24 rolling-cage PEELER-WASHER,
in-stock at
Alard Equipment Corporation item Y4892

A refurbished Magnuson Model NF-24 twenty-four roll continuous abrasive peeler / brush-washer / scrubber consists of twenty-four (24) 3 inch diameter by 6 foot long rolls arranged in a circular "rolling cage". The rolls counter-rotate with the rolling cage for high volume throughput, while the small diameter closely spaced rolls provide for high quality and versatility in peeling or brush scrubbing a wide range of products. Manufacturer advertising shows use on pickles, apples, potatoes, onions, carrots, baby carrots, pistachios, tomatoes, peaches & pears.



FEATURES:

  • Configured with twenty four (24) NEW abrasive grit 3 inch diameter by 72 inch long rolls mounted parallel (in-line) with product flow.

  • The peeling / scrubbing action is powered by two (2) 7.5 HP belt drive motors - one rotates the cage and the other drives the rolls..

  • 17 inch long by 15 inch wide infeed at approximately 56 inches high.

  • Full length discharge metering auger with 3/4HP stainless steel shrouded drive - to provide uniform product exposure time in the peeling chamber.

  • Lubricating and rinsing action is provided in the chamber by a stainless steel water spray pipe with several bronze spray nozzles.

  • 31 inch discharge height.

  • Water, peels and debris drop to a stainless-steel full-length bottom collection pan with 8.5 inch diameter center bottom outlet.

  • Hinged stainless steel side panels for ease of maintenance and sanitation.

  • Food grade sanitary stainless steel construction peeler frame and body (abrasive rolls are abrasive-coated steel).

  • 208 / 230 volt 3 phase electrical input.


As of this writing, this reconditioned abrasive roll cage peeler is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment without controls (buyer must agree in writing to install a safety interlock system); --OR can be completed with an operator control box set to buyer voltage specification, with variable speed controls and a safety interlock system prior to shipment. Call 315-589-4511 to discuss your lead time and voltage needs.

CALL 315-589-4511 to confirm availability and discuss your particular fruit and / or vegetable peeling application.

ALARD item reference #: Y4892

BIN DUMPER, TOTE DUMPER, food grade, stainless steel,Y5191

BIN DUMPER / TOTE DUMPER,
FOOD GRADE STAINLESS STEEL,
for 40 by 48 inch bins, hydraulic powered;
--IN STOCK NEW.



y5191g_crop_email.jpg


Food grade USDA sanitary stainless steel forward bulk box dumper, for discharging vegetables, fruits, food products, or other bulk materials from heavy bins, crates, totes, and/or Gaylords. Typically used as a raw product infeed dumper for industrial food processing applications. In stock, new and available for fast delivery.


FEATURES:

  • Sized for standard 40 inch by 48 inch bin, or smaller, with bin holder measuring 45.75 inches wide by 48 inches long by 42 inches deep.

  • Manually adjustable hold-down bar with adjustment steps for 28.5 inches high, 35.5 inch bin height, and 53.5 inch high bin clearance. Other hold-down settings can be provided on request; --CALL 315-589-4511 with your tote size specifications.

  • y5191i_crop_email.jpgFood grade stainless steel dumper construction, with all USDA sanitary welds on all product contact surfaces (i.e. inside the bin holder); with continuously welded smooth seams all around the interior.

  • Heavy duty tubular stainless steel base frame construction.

  • y5191d_crop_email.jpgDump action provided by (2) 3.5-inch diameter hydraulic cylinders powered by a self-contained 2HP hydraulic power pack with reservoir and manual controls, set for 208 / 230 / 460 volt 3 phase electrical input (unless otherwise specified).

  • Comes set for FLOOR LEVEL INFEED with a 38 inch pivot point and a 40 inch dump height from the edge of the dumper in a 45 degree fully inverted position (overall height and dump height from bin depend on the height of the bin). Support stands to raise the height of the dumper are available as an option and will be quoted upon request, based on customer specifications.


As of this writing this NEW forward bin dumper is in stock at ALARD, ready to go and available from inventory for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food grade bulk material handling needs.

ALARD item reference #: Y5191

CVP FreshVac vacuum gas-flush BAG SEALER, Y5055

CVP VACUUM / GAS-FLUSH BAG SEALER,
Model A-300, 34 inch seal bar,
USDA sanitary food grade.


y5055d_crop_email.jpgUsed refurbished CVP A-300 vacuum gas-flush BAG SEALER,
USDA food grade sanitary, in stock at Alard, item Y5055

A refurbished CVP A300 Fresh Vac food grade dual-snorkel jaw type bag sealing machine, with vane pump, for industrial food process applications. Manufacturer rated for modified atmosphere packaging of food products, including vegetables, poultry, beef, pork, lamb, sausage, fish, cheese, for extended shelf life.

FEATURES:

  • y5055i_crop_email.jpg34 inch seal bar with two (2) snorkels with hand activated controls.

  • Vacuum and gas-flush capability, (2) vac & (2) gas settings with selector & heat / cooler timers -- extends shelf life, preserves color of pre-cut produce, asphyxiates insects & larva in organic products.

  • Adjustable angle stainless steel frame, with threaded rod adjustable feet.

  • USDA food grade sanitary stainless steel construction.

  • y5055f_crop_email.jpgPowerful .75 HP GAST VANE vacuum pump.

  • 110 volt single phase (standard household current) electrical input.

  • Pneumatically powered seal bars and snorkels require compressed air supply input.


As of this writing, this CVP Freshvac modified atmosphere bag sealer is in stock at ALARD, refurbished to EXCELLENT operational, pneumatic, electrical, mechanical and cosmetic condition, available for immediate shipment.


CALL 315-589-4511 to confirm availability, and to discuss your particular food packaging equipment needs.

ALARD item reference #:Y5055

CVP A-300 vacuum gas-flush BAG SEALER, Y5074

CVP VACUUM / GAS-FLUSH BAG SEALER,
Model A-300, 26 inch seal bar.

y5074b_crop_email.jpg

A refurbished CVP A300 Fresh Vac food grade USDA sanitary dual-snorkel jaw type bag sealing machine, manufacturer rated for modified atmosphere packaging of food products, including vegetables, poultry, beef, pork, lamb, sausage, fish, cheese, for extended shelf life...


FEATURES:

  • y5074i_crop_email.jpg26 inch seal bar with two (2) snorkels with dual safety activation buttons.

  • Vacuum and gas-flush capability -- extends shelf life, preserves color of pre-cut produce, asphyxiates insects & larva in organic products.

  • Adjustable angle stainless steel frame with product shelf and threaded rod adjustable feet.

  • USDA food grade sanitary stainless steel construction.

  • y5074e_crop_email.jpgPowerful .75HP Gast vacuum pump.

  • 110 volt single phase (standard household current) electrical input.

  • Pneumatically powered seal bars and snorkels require compressed air supply.


As of this writing, this CVP Freshvac modified atmosphere packaging (MAP) bag sealer is in stock at ALARD, refurbished to EXCELLENT operational, pneumatic, electrical, mechanical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular pre-cut produce processing and packaging equipment needs.

ALARD item reference #:Y5074

ELEVATING BELT CONVEYOR with hopper, Y5219

ELEVATING BELT CONVEYOR /
ELEVATING FEED CONVEYOR with HOPPER,
24 inch wide cleated belt,
food grade, stainless steel.


y5219_crop_email.jpgUsed ELEVATING BELT CONVEYOR, 10x24,with hopper,
food-grade sanitary stainless steel,
in stock at Alard, item Y5219

A food grade stainless steel elevating feed conveyor with infeed hopper, for food processing applications.

FEATURES:

  • 48 inch wide by 30 inch deep stainless steel feed hopper.

  • y5219k_crop_email.jpg24 inch wide by 10 foot long rubber cleated belt:

    • 2 inch high cleats on 12 inch centers.

    • 4 inch high stainless steel sides.

  • 52 inch high infeed, 74 inch discharge height.

  • All food grade sanitary stainless steel construction.

  • y5219d_crop_email.jpgTop mounted 1 HP drive motor.

  • 208 / 230 / 460 volt 3 phase electrical input.


As of this writing, this elevating belt conveyor is in stock at ALARD, in VERY GOOD condition, available for immediate shipment.


CALL 315-589-4511 to confirm availability and discuss your industrial food processing and packaging bulk food handling needs.

ALARD item reference #: Y5219

Y5298 Fitzpatrick Guilo-River PREBREAKER model 20, Y5208

Fitzpatrick INDUSTRIAL PREBREAKER MILL,
14 inch rotor, 5HP,
food grade, stainless steel contacts.


y5208f_crop_email.jpgFitzpatrick Fitzmill GuiloRiver model 20,
pre-cutter, pre-breaker, block grinder,
Alard item Y5208

The Fitzpatrick Fitzmill Model 20 (GR14Lx14D) GUILO-RIVER, with 14 inch diameter rotor, for reduction of hard cheese (parmesan, aged cheddar, etc.) and frozen food products including eggs, cream, butter, juice & juice concentrates, fruits and more.


FEATURES:

  • y5208m_crop_email.jpgPer manufacturer literature, pre-breaking frozen ingredients eliminates thawing / tempering of ingredients which reduces labor and risk of microbiological contamination.

  • 10 inch wide by 9 inch long throated infeed with safety switch.

  • 14 inch diameter by 14 inch wide rotating cylinder armed with hook shaped .75 inch wide by .5 inch high cutting pins.

  • Hinged top & bottom covers for ease of cleaning and inspection.

  • y5208i_crop_email.jpg1 inch diameter perforated stainless steel screen beneath hammers / knives. A wide range of hammer / blade and screen combinations are available for this machine. Screen perforations / openings determine cut size / particle size output - CALL 315-589-4511 to discuss your particular particle size reduction requirement.

  • Food grade sanitary stainless steel product contacts with painted steel frame.

  • 5 HP drive motor.

  • 208 / 230 / 460 volt 3 phase electrical input.

  • Previously used to reduce hard Parmesean cheese prior to final particle reduction.


As of this writing, this Fitzpatrick Guilo-River is in stock at ALARD, in VERY GOOD operational condition and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food product particle size reduction needs.

ALARD item reference #: Y5208

Fitzpatrick Fitzmill, 12- inch 30HP hammermill, grinder, shredder, Y5207

Fitzpatrick INDUSTRIAL IMPACT MILL,
12 inch rotor, 30HP, food grade,
with stainless steel contacts.

y5207j_crop_email.jpgUsed Fitzpatrick Fitzmill hammer-mill,
12 inch rotor, 30HP, food-grade stainless steel contacts,
in-stock at Alard, item Y5207

A Fitzpatrick Fitzmill Model D(12) comminutor hammermill, with 12 inch diameter rotor, for controlled particle size reduction in food processing applications, food grade, stainless steel product contact surfaces.

FEATURES:

  • Flanged infeed hopper with built-in safety grid and 12 inch wide by 13 inch long opening.

  • Thirty-two (32) stainless steel two-sided broached / blunt hammers (replaceable, interchangeable), with reversible shaft and exterior pillow block bearings. Other hammer / knife parts for this comminuting machine are readily available - CALL 315-589-4511 to discuss your specific cutting / grinding milling application.

  • y5207h_crop_email.jpgStainless steel screen beneath hammers / knives determines cut size / particle size output - CALL 315-589-4511 to discuss your particular particle size reduction requirement.

  • Bag groove discharge with skirt.

  • Food grade sanitary stainless steel product contacts with painted steel frame.

  • y5207f_crop_email.jpg30 HP belt drive motor with six (6) belt pulley.

  • 208 / 230 / 460 volt 3 phase electrical input.


As of this writing, this Fitzpatrick mill is in stock at ALARD, in VERY GOOD operational condition and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food product particle size reduction needs.

ALARD item reference #: Y5207

Waukesha Model 2 LOBE PUMP, .5 inch inlet outlet Y4457

WAUKESHA Model 2 LAB-SIZE
SANITARY POSITIVE DISPLACEMENT PUMP
with drive and base.


y4457c_crop_email.jpg


A Waukesha Cherry-Burrell sanitary positive displacement Lobe pump, manufacturer recommended for pumping viscous fluids, slurries, or particulate bearing liquids in industrial food, dairy, canning, bakery, beverage and pharmaceutical processing applications. Complete with integrated drive and base.



FEATURES:

  • One half-inch (0.5 inch) inlet and outlet ports with threaded connections in a horizontal flow orientation.

  • y4457j_crop_email.jpgUSDA / 3A dairy sanitary food grade pump with a T316 stainless steel body, cover and shaft, with easy disassembly for cleaning and sanitation.

  • Manufacturer rated for 227 RPM and nominal capacity to 1 gallon per minute throughput (depending on product viscosity and head pressure).

  • Mounted on stainless steel base.

  • Coupled to a 1/4HP 110 volt single phase (household electric) with variable speed control.


As of this writing, this Waukesha Lobe Pump is in stock at ALARD, in VERY GOOD fully operational condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food handling needs.

ALARD item reference #: Y4457


40 gallon self-contained electric KETTLE, Y5189

GROEN Model DEE/4T-40,
40 GALLON SELF-CONTAINED ELECTRIC
STAINLESS STEEL TILT KETTLE.


y5189f_crop_email.jpg


A 40 gallon capacity electric-fired cooking kettle with tilt-to-dump discharge and a front bottom outlet with valve.



FEATURES:

  • y5189n_crop_email.jpg26 inch diameter by 22 inch deep hemispherical bottom vessel.

  • Front bottom outlet with manual valve.

  • Crank tilt to dump with pour lip.

  • Steam jacket manufacturer rated for 50 psi @ 300F, "U" stamped, National Board Coded and UL listed.

  • y5189i_crop_email.jpgEnergy-saving hinged stainless steel top cover with lift handle.

  • 42 inch infeed height.

  • All food grade sanitary stainless steel construction.

  • Self-contained / integral electric heater powered by 460 volt 3 phase electrical input, complete with thermostatic control.


As of this writing, this Groen Dover Industries 40 gallon electric cooking kettle is in stock at ALARD, in EXCELLENT operational, mechanical & electrical condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food process cooking kettle specification.

ALARD item reference #: Y5189

6 inch FOOD PUMP, Cornell NHTAF18K, in-stock, Y5188

CORNELL Model 6NHTA-F18K
hydro-transport FOOD PUMP.


y5188a_crop_email.jpg



A Cornell 6 inch food pump with flanged inlet and outlet connections. The Cornell Hydro-Transport Food Pump is an excellent foundation for a pipe flume, open flume, wash flume, chill flume, disinfectant bath, or other water conveyor configuration for gently conveying high volumes of whole or cut food products in water at tons-per-hour volume capacities.



FEATURES:

  • Cornell 6NHTA-F18K cast-iron hydro flow food pump with a two (2) vane mild steel impeller for higher flow rate and HP capacity than a standard NHP model food pump.

  • y5188c_crop_email.jpgSix-inch inlet / outlet.

  • Manufacturer rated for solids handling ability for products up to 3 inch diameter.

  • Specifically designed and built for industrial food processing application use with tons-per-hour throughput capacity.

  • Manufacturer recommends 2 or 3 to 1 ratio of water to product, with your product capacity determined by horsepower, RPM, and total dynamic head resistance. Pump curves are available by request; --call 315-589-4511 do discuss your specific application requirements.


The Cornell hydro transport food pump is frequently employed to power open food product transport flume systems, while others pump into a closed pipe flume, which they run in a coil pattern on the ceiling to conserve floor space. The flumes provide hold time to remove heat, and extend exposure to the water, which usually includes either a sanitizing agent, or a preservative solution such as vitamin C; depending on the product. The power of the Cornell Hydro-Transport pump allows food producers to deliver their now chilled and treated ingredients to any point in the plant where they want to dry, mix and pack the final product.

Others use the chill flume for pre-cooling blanched (very lightly cooked to kill the active enzymes) food products in water prior to running them through an IQF freezer tunnel. Others use the flume system just to convey product in water. In every case, the powerful Cornell pump can gently move high tons-per-hour output to wherever it needs to go in the plant.

ALARD also stocks and custom-configures various kinds of dewatering, solids-separation, water recovery and filtration equipment to recover the food product from the pump water, and to recapture, treat and recirculate the water as necessary, as well as drying and packaging equipment to complete the process; all tailored to the end-user's specific food product(s) and application. With Cornell's large range of hydro-transport pump size and material configurations, and with ALARD's ability to configure and "gear" the pump to the buyer's specific needs, ALARD's Cornell Hydro-Transport food pumps are a superb tool for a wide variety of industrial food processing applications.

As of this writing this unused 6 inch food pump is in stock at ALARD, in LIKE NEW condition and available for immediate shipment.

CALL 315-589-4511 to confirm current availability and discuss your particular food process bulk product conveying, chilling, cooling, sanitizing and pumping equipment needs.

ALARD item reference #: Y5188

Continuous vacuum gas-flush, food-grade TRAY SEALER, Y5173

TRAY SEALER, CONTINUOUS flow,
with vacuum / gas-flush capability,
all food grade sanitary.


y5173b_crop_email.jpg

A KOCH ILPRA Ultrasource Food Pack 1402 V/G is a fully automatic high volume tray sealer for vacuum packaging or vacuum / gas flush packaging.


FEATURES:

  • Configured with vacuum and / or gas-flush capabilities for modified atmosphere packaging (controls can be set for operation with vacuum and gas flush, vacuum only, gas-flush only, or set for atmospheric sealing).

  • Manufacturer rated for up to 15 cycles per minute - number of trays sealed per cycle depends on tray size.

  • Set for 7 inch long by 7 inch wide trays.

  • y5173_crop_email.jpg112 inch long infeed / packing conveyor with 8 inch lug spacing.

  • 48 inch long discharge belt.

  • Integral operator control panel.

  • Left to right product flow from operator control position.

  • Plastic tray seal material.

  • Designed for ease of maintenance and sanitation.

  • y5173h_crop_email.jpgUSDA food grade sanitary stainless steel construction.

  • 230 volt 3 phase electrical input.


As of this writing, this modified atmosphere packaging machine is in stock at ALARD, in EXCELLENT operational, mechanical, electrical and cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food packaging equipment needs.

ALARD item reference #: Y5173

CVP A-300 BAG SEALER, Y5054

CVP VACUUM / GAS-FLUSH BAG SEALER,
Model A-300, with 32 inch seal bar.


y5054c_crop_email.jpg

A refurbished CVP A300 Fresh-Vac food grade dual-snorkel jaw type bag sealing machine, with vane pump, for industrial food process applications. Manufacturer rated for modified atmosphere packaging of food products, including vegetables, poultry, beef, pork, lamb, sausage, fish, cheese, for extended shelf life.


FEATURES:

  • 32 inch seal bar with two (2) snorkels with two-hand activated (for safety) controls.

  • Vacuum and gas-flush modified atmosphere packaging (MAP) capability -- extends shelf life, preserves color of pre-cut produce, asphyxiates insects & larva in organic products.

  • Adjustable angle stainless steel frame, with threaded rod adjustable feet.

  • USDA food grade sanitary stainless steel construction.

  • y5054f_crop_email.jpgPowerful .75 HP electric vacuum pump.

  • 110 volt single phase (standard household current) electrical input.

  • Pneumatically powered seal bars and snorkels require compressed air supply input.

As of this writing, this CVP Freshvac modified atmosphere bag sealer is in stock at ALARD, refurbished to EXCELLENT operational, pneumatic, electrical, mechanical and cosmetic condition, available for immediate shipment.


CALL 315-589-4511 to confirm availability and discuss your industrial food process modified atmosphere packaging equipment needs.

ALARD item reference #: Y5054

OVER-CONVEYOR MAGNETIC METAL TRAP, Y5204

METAL TRAP, food grade, stainless steel.


y5204a_crop_email.jpg

A Bunting Magnet Co. Model PMV4538XNF plate magnet commonly used to separate ferrous contaminants from belt transfer areas in industrial food processing and other assorted applications.

FEATURES:

  • Ceramic magnet.

  • 36 inch long by 12 inch wide magnetic area.

  • Four (4) 5/8 inch mounting holes.

  • All food grade stainless steel construction

  • Previously used as part of an inline produce washer.


As of this writing, this metal trap plate is in stock at ALARD, being sold as-is for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y5204

SPRAY TUNNEL, food grade spray washer, 8x3, Y4858

SPRAY WASHER-CHILLER, with CONVEYOR belt discharge, all stainless steel.

y4858f_crop_email.jpg


A Meyer Industries SPRAY WASHER for use on almost any produce product, whether whole or pre-cut fruit or fresh-cut vegetables to rinse, treat and/or wet product, for example increasing freezer tunnel efficiencies. Well suited for handling delicate and/or fragile food products. Just pump in cold water to use as a spray CHILLER or as a combination cooler / disinfectant washer.



FEATURES:

  • 36 inch wide by 98 inch long cleated belt with 2 inch high cleats on 6 inch centers and full underpan.

  • 48 inch long multi head spray system over the wash tank to assure uniform exposure to the cooling water and / or sanitizing or preservative solution:

    • Four (4) spray bars each equipped with four (4) spray nozzles.

    • 3.25 inch high product clearance.

    • Center hinged stainless steel cover.

  • Gentle sprays are suitable for delicate products.

  • 38 inch high infeed, 42 inch discharge height.

  • 24 inch long by 32 inch wide by 19 inch deep surge tank.

  • 3HP recirculation pump with 3 inch inlet / 2 inch outlet and washdown drive motor.

  • All food grade sanitary stainless steel construction.

  • 460 volt 3 phase electrical input.


As of this writing, this spray washer is in stock at ALARD, in EXCELLENT condition and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y4858

Unifiller SINGLE PISTON DEPOSITOR Y5144

SINGLE PISTON VOLUMETRIC FILLER / DEPOSITOR.

y5144f_crop_email.jpg


A Unifiller Model 1000 pneumatically operated food grade stainless steel single piston filling machine for filling containers or use as an ingredient depositor for adding sauces or other liquid food ingredients to other food products. Fills viscous liquids such as sauces, creams, pastes, and oils, including products with particulates such as salsa.

FEATURES:

  • 37 inch long by 26 inch wide by 18 inch deep sloped infeed hopper.

  • y5144i_crop_email.jpgPneumatically powered piston, in a 6 inch diameter by 10 inch long cylinder, crank adjustable for up to 100 ounces nominal fill per stroke.

  • 3 inch diameter threaded inlet / outlet with pneumatic cut-off valve.

  • Equipped with a remote foot switch for semi-automatic operation.

  • y5144p_crop_email.jpgFood grade stainless steel construction, including tubular stainless steel frame, with threaded-rod height-adjustable foot pads.

  • Requires compressed air input for operation.


As of this writing, this single piston filler is in stock at ALARD, in EXCELLENT condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y5144

BELT CONVEYOR, 8x6, food grade, stainless steel, Y5145

FOOD GRADE BELT CONVEYOR,
8.5 feet long by 6 inches wide, stainless steel,
with guide rails and variable drive.


y5145d_crop_email.jpg

This PACKRITE CONVEYMASTER is a food-grade conveyor belt, purpose-built to use as a bag conveyor / bag sealer thru-conveyor, with a Packrite 6000 continuous band BAG SEALER (available separately). Due to its small footprint, this conveyor is also a jack-of-all trades with many other food processing applications.


FEATURES:

  • 6 inch wide by 8.5 foot long white USDA sanitary food grade rubber belt.

  • y5145b_crop_email.jpgDual side-rails with non-scratch nylon buffer strips, adjustable for up to a 6.5 inch width.

  • 31 inch working height with adjustable threaded rod feet.

  • Food grade sanitary stainless steel construction.

  • 1/4 HP drive motor with variable speed control.

  • 110 volt single phase (household current) electrical input.


As of this writing, this NEW conveyor is in stock at ALARD and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food packaging needs.

ALARD item reference #: Y5145

Kronen HGW 2-head WEDGER-SLICER-CORER, Y4628

FRUIT & VEGETABLE
MANUAL GRID CUTTING SYSTEM,
all stainless steel

y4628e_crop_email.jpg

The Kronen Model HGW is a manually operated food cutter capable of coring & wedging of apples, slicing tomato, top/tail/cut or slice pineapple, potato wedges & fries, coring cabbage & peppers, destoning mangos, dividing cauliflower & broccoli and much more...


FEATURES:

  • Two (2) head manually operated table-top design.

  • Easily interchangeable cutting inserts with over 200 cut options available from the manufacturer.

  • Spring return loaded lever for effortless operation.

  • Adjustable working height up to 9.5 inches from the work surface.

  • y4628i_crop_email.jpgCurrently set-up for a 4-wedge cut.

  • All food grade sanitary stainless steel construction.


As of this writing, this manually operated grid cutter is in stock at ALARD, in LIKE NEW operational & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss the details of your particular food cutting equipment needs.

ALARD item reference #: Y4628

Fitzpatrick FAS012 HAMMERMILL, Alard item Y4412

FITZPATRICK INDUSTRIAL IMPACT MILL, 50HP,
food grade, stainless steel, hammer-mill.

y4412_crop_email.jpg


A Fitzmill Model FASO-12 comminutor hammermill, for controlled particle size reduction in food processing applications...



FEATURES:

  • 14 inch long by 14 inch wide by 14 inch deep infeed hopper.

  • y4412c_crop_email.jpgTWIN 4 inch diameter INFEED SCREWS powered by 1 HP 3 phase drive motor.

  • 2 sided blunt stainless steel hammers.

    • Note: Other hammer / knife parts for this comminuting machine are readily available from the manufacturer. Call 315-589-4511 to discuss your industrial food process milling application.

  • y4412b_crop_email.jpgUnderside, conical collection pan with a 4 inch threaded discharge.

  • Food grade, all stainless steel product contact surfaces.

  • Mounted on food grade sanitary stainless steel frame, guards and shrouds.

  • Water cooled.

  • 50 HP belt drive 3 phase motor.

As of this writing, this Fitzpatrick mill is in stock at ALARD, in VERY GOOD condition and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y4412