RIETZ Thermascrew STEAM BLANCHER,
Model TL-12-K2212,
all stainless steel...

Rietz OPEN SCREW BLANCHER,
Alard item Y4677
from Alard Equipment Corporation.

A food grade stainless steel Rietz-Bepex Model TL12-K2212 OPEN SCREW BLANCHER / live steam cooker, 12x12 for industrial food process fruit and vegetable blanching, and / or cooking by steam.

FEATURES:

• 12 inch diameter by 12 foot long open screw for controlled, consistent product blanch / cook time.
  
  
• The screw auger has 3 7/8 inch high flights as measured from the center hub; the flights are 12 inch pitch (12 inches from flight to the next).
  
  
• Ten (10) live steam injection ports/diffusers along the bottom of the trough.
  
  
• Two (2) hinged top covers.
  
  
• 12 inch by 12 inch flanged bottom end discharge.
  
  
• 8 inch diameter steam / vapor vent over discharge end.
  
  
• Food grade sanitary stainless steel construction bolted to a painted mild steel support frame.
  
  
• 1.5 HP drive motor with mechanical variable speed.
  
  
• 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this Rietz industrial food process steam blancher is in stock at ALARD,
available in AS-IS condition for immediate shipment -or- can at additional cost be serviced by shop to GOOD OPERATING condition for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular commercial-scale fruit and vegetable steam cooker equipment needs.

ALARD item reference #: Y4677

VACUUM COOLING SYSTEM...

An Odenberg Model 450 VACUUM COOLING SYSTEM for rapid cooling of hot food products such as blanched vegetables, diced or whole, including corn cobs or potatoes, with vacuum technology...

FEATURES:

• Batch vacuum cooling system available singly, or as of this writing, we have another (Alard item reference Y4070) in stock which could be combined with this machine, to provide a pair (2) of vacuum coolers set-up in a side-by-side configuration for continuous batch operation. Call 315-589-4511 to confirm availability and discuss your food process vacuum cooling need.
  
  
• 124 inch infeed height.
  
  
• Tear-drop shaped 15.9 cu. ft. (450 liter) capacity vessel constructed of 316T stainless steel.
  
  
• Previously tested to run blanched sliced potatoes.
  
  
  • <>2,500 lbs per hour output (per vessel).
    
    
  • Starting temperature of 140 degree F cooling to <>80 degress F.
    
    
  • 8 minute cycle (per vessel).
    
    
  • CIP equipped.
    
    
• Stainless steel NEMA-4 rated control panel with Allen BRadley PLC.
  
  
• All food grade stainless steel construction.
  
  
• 230 volt 3 phase electrical input and 100 psi air requirement.
  
  

OPERATION:

• Elevating conveyor (not included) feeds open style tipping scale.
  
  
• Filled scale tips forward to fill vessel.
  
  
• Independently mounted pneumatically actuated door closes and pulls 28 inches of vacuum.
  
  
• Vacuum is released before vessel swings down to discharge onto a dewatering shaker table (not included).

As of this writing, this vacuum cooler is available from ALARD, in LIKE NEW condition with timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y5306

VACUUM BATCH COOLER...

An Odenberg Model 450 VACUUM COOLING SYSTEM An Odenberg Model 450 VACUUM COOLING SYSTEM for rapid cooling of hot food products such as blanched vegetables, diced or whole, including corn cobs or potatoes, with vacuum technology...

FEATURES:

• Batch vacuum cooling system available singly, or as of this writing, we have another (Alard item reference Y5306) in stock which could be combined with this machine, to provide a pair (2) of vacuum coolers set-up in a side-by-side configuration for continuous batch operation. Call 315-589-4511 to confirm availability and discuss your food process vacuum cooling need.
  
  
• 124 inch infeed height.
  
  
• Tear-drop shaped 15.9 cu. ft. (450 liter) capacity vessel constructed of 316T stainless steel.
  
  
• Previously tested to run blanched sliced potatoes.
  
  
  • <>2,500 lbs per hour output (per vessel).
    
    
  • Starting temperature of 140 degree F cooling to <>80 degress F.
    
    
  • 8 minute cycle (per vessel).
    
    
• Includes Sterling VACUUM SYSTEM with pump and tank.
  
  
• CIP equipped.
  
  
• Stainless steel NEMA-4 rated control panel with Allen BRadley PLC.
  
  
• All food grade stainless steel construction.
  
  
• 230 volt 3 phase electrical input and 100 psi air requirement.
  
  

OPERATION:

• Elevating conveyor (not included) feeds open style tipping scale.
  
  
• Filled scale tips forward to fill vessel.
  
  
• Independently mounted pneumatically actuated door closes and pulls 28 inches of vacuum.
  
  
• Vacuum is released before vessel swings down to discharge onto a dewatering shaker table (not included).

As of this writing, this vacuum cooler is available from ALARD, in LIKE NEW condition with timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y4070

1580 GALLON VERTICAL MIXING TANK
with SWEEP AGITATION, all stainless steel.

An APV / CREPACO 1580 gallon, round, vertical, single wall mixing tank with dome top, shallow cone bottom, and sweep agitation, food grade, stainless steel.

FEATURES:

• Vessel measures 84 inch diameter by 70 inches deep.
  
  
• Domed top with 18 inch diameter manway with cover with factory side ladder for ease of access.
  
  
• Several top inlet ports.
  
  
  • Four (4) 1.5 inch diameter with sanitary threads.
    
    
  • One (1) 2 inch diameter with Tri-Clamp connection.
    
    
  • One (1) vent port.
    
    
• Full bottom sweep agitator blade:
  
  
  • Top, center mounted 1 HP motor drive.
    
    
  • Set for 17 RPM agitator blade speed.
    
    
  • Drive/gearbox has new bearings and seals.
    
    
• Sloped bottom with 2 inch diameter threaded bottom side discharge.
  
  
• All food grade sanitary stainless steel construction.
  
  
• 208 / 230 volt 3 phase electrical input.

As of this writing, this mix tank is in stock at ALARD, in GOOD condition and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular liquid process tank, storage tank, hold tank and/or mix tank requirements.

ALARD item reference #: Y3956