RECONDITIONED SPIN DRYER,
Bock Model FP-90...

DEMO VIDEO
Refurbished Bock Northstar model FP-90
SPIN DRYER, Alard item Y5757

This refurbished (NSEP) North Star Engineered Products (formerly Bock) FP-90 CENTRIGUGE DRYER is a food grade stainless steel centrifugal drying machine for drying washed fruits and vegetables, including leafy vegetables, whole or cut, in the context of an industrial pre-cut produce packing operation.

FEATURES:

• 7.36 cubic foot removable basket measuring 30 inches in diameter by 18 inches deep.
  
  
  • 3/8 inch perforated basket.
    
    
  • Lifting "ears" on each side of the basket provide for overhead winch lift-out and easy swivel-dumping action.
    
    
• Manufacturer rated 130 lb (dry weight) batch capacity for up to 1,950 lbs of product per hour.
  ~ Lid-opening assist cylinders.
  ~ Includes operator controls with a 10 minute settable timer and safety interlock system.  Machine won't start with the lid open as lid locks during spin cycle.
  ~ Durable hydraulic transmission.
  ~ Pneumatic brake.
  ~ All food grade stainless steel construction including basket, tank & base.
  ~ 5 HP belt drive washdown motor.
  ~ 208/230 volt 3 phase electrical input.
  
  

As of this writing, this refurbished BOCK FP90 spinner is in stock at ALARD, in EXCELLENT operational, electrical, mechanical & cosmetic condition, ready-to-go and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular fresh-cut / pre-cut produce packing equipment needs.

ALARD item reference #: Y5757

APV AUGER FEED PUMPING SYSTEM,
transfer HOPPER-FEEDER,
food grade, stainless steel...

An APV Auger Feed Pumping System for handling extremely viscous, sticky products which do not easily flow with gravity, including porous products that prevent pump priming - rectangular infeed lobe pump available separately.

FEATURES:

• Hopper-Feeder tank measures 48 inch wide by 78 inch long by 43 inch deep with tapered sides.
  
  
• Dual 12 inch diameter center bottom screw-feed augers.
  
  
• Full length upper ribbon mixer shaft.
  
  
• 2.5 inch by 5 inch flanged center bottom end discharge port for lobe / positive displacement pump available separately (Call 315-589-4511 to discuss your auger feed pumping system need).
  
  
  • This discharge chute is bolted on (see pictures), and can be removed for open discharge applications, or replaced with a discharge coupler for connection to whatever downstream equipment will be fed.
    
    
• All food grade sanitary stainless steel construction.
  
  
• 15 HP chain drive motor.
  
  
• 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this auger feed transfer hopper is in stock at ALARD, in EXCELLENT operational, mechanical, electrical, and cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial food process bulk food product handling, transfer and conveying equipment needs.

ALARD item reference #: Y5719

METERING HOPPER,
INCLINED SCREW FEEDER,
food grade, stainless steel,
8 foot discharge height...

A Weiler MH50 Metering Hopper is a stainless steel agitated HOPPER over an incline-auger-feeder for even-feeding raw bulk food products or processed food products to down-line food processing equipment. Manufacturer recommended to maximize performance of meat grinders by efficiently controlling the feed rate.

FEATURES:

• Tapered infeed hopper 53 inches long by 71.5 inches wide by 50 inches deep with stainless steel safety grid.
  
  
  • Bottom mounted 16 inch diameter perpendicular screw auger, designed to pull product to the center of the hopper.
    
    
  • 5 HP Eurodrive motor for chain and sproket agitator drive with reducer for up to approximately 15 RPM.
    
    
• 6.5 foot long by 16 inch diameter screw auger:
  
  
  • Ribbed trough for increased yield.
    
    
  • Hand polished stainless steel reduces fat build-up and minimizes smearing.
    
    
    
  • 3 HP variable speed chain and sprocket agitator drive motor adjustable for approximately 45 to 180 rpm.
    
    
• 70 inch infeed height to hopper, 50 inch high discharge (33 inch with chute in place) from auger feeder.
  
  
• All food grade sanitary stainless steel construction.
  
  
• 208 / 230 / 460 volt 3 phase electrical input.
  
  

As of this writing, this screw loader is in stock at ALARD, in VERY GOOD OPERATING condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial food process bulk food product transfer / conveying equipment needs.

ALARD item reference #: Y5835

Fortress Stealth
GRAVITY FLOW METAL DETECTOR,
9 inch diameter opening,
food grade, stainless steel...

A Fortress Stealth gravity fall / drop-through metal detector for industrial food manufacturing and packaging applications. Gravity free-fall metal detection systems are commonly used for free-flowing granular and/or particulate products, as well as sliced, diced, shredded & whole products in food manufacturing and other industrial production applications. Gravity flow metal detectors are commonly mounted under feed hoppers, or under mixer / blender discharges, or between scales and form-fill-seal or other types of baggers.

FEATURES:

• 9 inch inside diameter by 13.25 inch long aperture.
  
  
• Remote digital control box.
  
  
• All food grade hose-wash-down stainless steel construction.
  
  
• 110 volt single phase (standard household current) electrical input.
  
  

As of this writing, this Fortress drop-thru metal detector is in stock at ALARD, in EXCELLENT operational, electrical mechanical & cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food product inspection needs.

ALARD item reference #: Y5853

AGITATOR HOPPER, with ELEVATING SCREW CONVEYOR, food grade sanitary, stainless steel...

A BLENTECH Model SC1610L Elevating Screw Conveyor is a stainless steel hopper with paddle mixer AGITATION over an inclined auger feeder discharge, for accepting bulk raw or processed food products and feeding them to down-line food processing equipment. Also sometimes referred to as an auger feed pumping system, this food grade hopper-feeder offers very positive product movement capabilities, to avoid bridging and clogging so as to provide a consistent even-feeding of product to downstream processes.

FEATURES:

• Tapered PADDLE MIXER IN-FEED HOPPER:
  
  
  • Hopper is 70 inches long by 66 inches wide by 58 inches deep.
    
    
  • 3 foot wide full-length paddle mixer agitation.
    
    
  • 69 inch infeed height as currently configured on stainless steel frame.
    
    
  • 2 inch diameter hopper drain with UMHW cover.
    
    
• INCLINE AUGER DISCHARGE -
  
  
  • 16 inch diameter by 8 foot long screw auger.
    
    
  • 50 inch discharge height as currently configured on stainless steel frame.
    
    
• All food grade sanitary stainless steel construction.
  
  
• Two (2) 5 HP chain drive washdown motors, 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this incline screw loader is in stock at ALARD, in VERY GOOD condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial food process bulk food product transfer / conveying equipment needs.

ALARD item reference #: Y5836

GRADER REEL / SLIVER REMOVER, 18x36, food grade, stainless steel, unpopped kernel remover...

A size-grader reel, rotary drum fruit and vegetable grading machine, for size grading, size sorting, sliver removal, fines removal, grading out shorts, solids separation, dewatering and/or feeding to downstream components. Traditionally referred to as an "old-maid  remover", this type of grading reel is used in popcorn production to remove un-popped kernels.

FEATURES:

• 18 inch diameter by 36 inch long grading drum with...
  
  
  • 1/4 inch round rod.
    
    
  • 3/16 inch sieve, 1/4 inch & 5/16 inch sieve reels.
    
    
  • Trunnion drive.
    
    
• 24 inch wide by 16 inch long tapered infeed chute with 2.5 inch high sides.
  
  
• 47 inch high infeed, 30 inch discharge height with adjustable threaded rod legs.
  
  
• All food grade sanitary stainless steel construction.
  
  
• 1/2 HP drive motor.
  
  
• 110 volt single phase (household current) electrical input.

As of this writing, this rotary drum grading reel is in stock at ALARD, in GOOD condition and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food product grading needs.

ALARD item reference #: Y4595

LEGION 80 gallon
SELF-CONTAINED ELECTRIC
STAINLESS STEEL KETTLE with
SINGLE MOTION SCRAPER-AGITATOR

An 80 gallon capacity electric-fired cooking kettle with scraped-surface agitator and side bottom outlet.

FEATURES:

• 34 inch diameter by 23 inch deep hemispherical bottom vessel.
  
  
• Side bottom outlet with 2 inch valve Tri-clamp connection.
  
  
• Single motion scrape-surface agitation:
  
  
  • 1HP drive motor with 6.9 - 34 RPM variable speed.
    
    
  • NEW scrapers.
    
    
• Steam jacket manufacturer rated for 30 psi @ 274F, U-stamped, ASME &  National Board Coded.
  
  
• Hinged half-moon covers with safety lock-out for mixer.
  
  
• 52 inch infeed height, 23 inch high discharge.
  
  
• All food grade sanitary stainless steel construction.
  
  
• Self-contained / integral electric heater powered by 208 /230 volt 3 phase electrical input, complete with thermostatic control.
  
  

As of this writing, this Legion 80 gallon electric cooking kettle is in stock at ALARD, in EXCELLENT operational, mechanical & electrical condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y5837

GROTE 1514 Peppamatic,
PEPPERONI SLICER,
USDA sanitary food grade,
stainless steel...

A Grote model 1514 Peppamatic pepperoni cutter is the ideal machine for frozen pizza as it slices AND applies pepperoni directly onto a variety of pizza products, including french bread pizza.

FEATURES:

• Manufacturer rated for up to 45 twelve-inch pizzas per minute.
  
  
• Handles up to 14 inch diameter pizza.
  
  
• Patented "Accuband" continuous band cutting system for precision slicing:
  
  
  • Variable slice thickness from .04 inch (1mm) to .14 inch (3.5 mm).
    
    
  • Continuous gravity feed product loading during operation.
    
    
  • 1HP stainless steel shrouded drive motor.
    
    
• 54 inch long by 18 inch wide stainless steel mesh carryout conveyor.
  
  
• All food grade USDA sanitary stainless steel construction - easily disassembled and reassembled for fast cleaning & ease of sanitation.
  
  
• Operator control panel with variable speed controls and counter.
  
  
• Hydraulic power pack.
  
  
• 208 / 230 volt 3 phase electrical input.
  
  

As of this writing, this automatic food slicing machine is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

ALARD item reference #: Y5900

WAUKESHA Model 134
SANITARY ROTARY LOBE PUMP,
rectangular flange feed
for hopper or pipe-feed,
positive displacement...

A Waukesha sanitary PD (positive displacement) twin lobe pump, with rectangular flange inlet, is manufacturer recommended for pumping highly viscous and/or sticky substrate such as meat, pet food, dough, fondant, cheese plus other similar difficult to handle products in industrial food, dairy, canning, bakery, beverage and pharmaceutical processing applications.

FEATURES:

• Versatile feed and orientation options:
  
  
  • 3 inch by 9 inch rectangular flanged in-feed opening, can be fitted with a chute for hoppper in-feed, or can be covered with a gasketed plate with a pipe fitting for pipe feed.
    
    
  • Shown in pictures as currently configured for top infeed, but mounting foot can be attached to any of three sides, to reorient inlet / outlet to top-feed, right-side feed, or left-side in-feed. 
    
    
• 3 inch threaded discharge.
  
  
• USDA / 3A Dairy sanitary food grade pump with a T316 stainless steel body, cover and shaft, with easy disassembly for cleaning and sanitation.
  
  
• Manufacturer rated for
  
  
  • 0 - 400 RPM.
    
    
  • 200 psi (13.8 bar).
    
    
  • .253 gallons (.958 liter) per revolution.
    
    
  • 101 gallons per minute (22.9 cubic meters per hour) nominal capacity.

As of this writing, this rectangular in-feed positive displacement lobe pump is in stock at ALARD, in excellent operational and mechanical condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food grade sanitary pump specifications.

ALARD item reference #: Y5775

WAUKESHA Model 134
SANITARY ROTARY LOBE PUMP,
rectangular flange in-feed
for hopper or pipe-feed,
positive displacement...

A Waukesha sanitary PD (positive displacement) twin lobe pump, with rectangular flange inlet, is manufacturer recommended for pumping highly viscous and/or sticky substrate such as meat, pet food, dough, fondant, cheese plus other similar difficult to handle products in industrial food, dairy, canning, bakery, beverage and pharmaceutical processing applications.

FEATURES:

• Versatile  feed and orientation options:
  
  
  • 3 inch by 9 inch rectangular flanged in-feed opening, can be fitted with a chute for hoppper in-feed, or can be covered with a gasketed plate with a pipe fitting for pipe feed.
    
    
  • Shown in pictures as currently configured for top infeed, but mounting foot can be attached to any of three sides, to reorient inlet / outlet to top-feed, right-side feed, or left-side in-feed.
    
    
• 3 inch threaded discharge.
  
  
• USDA / 3A Dairy sanitary food grade pump with a T316 stainless steel body, cover and shaft, with easy disassembly for cleaning and sanitation.
  
  
• Manufacturer rated for
  • 0-400 RPM.
  • 200 psi (13.8 bar).
  • .253 gallons (.958 liter) per revolution.
  • 101 gallons per minute (22.9 cubic meters per hour) nominal capacity.

As of this writing, this rectangular in-feed positive displacement lobe pump is in stock at ALARD. Has a small nick in one leading lobe edge, and is otherwise in good operational and mechanical condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food grade sanitary pump specifications.

ALARD item reference #: Y5774

WAUKESHA Model 224
SANITARY ROTARY LOBE PUMP,
RECTANGULAR INFEED,
positive displacement pump...

A Waukesha sanitary PD twin lobe pump, with rectangular flange inlet, is manufacturer recommended for pumping highly viscous and/or sticky substrate such as meat, pet food, dough, fondant, cheese plus other similar difficult to handle products in industrial food, dairy, canning, bakery, beverage and pharmaceutical processing applications.

FEATURES:

• Versatile feed and orientation options:
  
  
  • 4 inch by 11 inch rectangular flanged in-feed opening, can be fitted with a chute for hoppper feed, or can be covered with a gasketed plate with a pipe fitting for pipe feed.
    
    
  • Shown in pictures here as currently configured for top in-feed, but mounting foot can be attached to any of three sides, to reorient inlet / outlet left-side in-feed, right-side in-feed, or top feed.
    
    
• 4 inch threaded discharge.
  
  
• USDA / 3A Dairy sanitary food grade pump with a T316 stainless steel body, cover and shaft, with easy disassembly for cleaning and sanitation.
  
  
• Manufacturer rated for:
  
  • 0 - 400 RPM.
  • Up to 300 psi (20.7 bar).
  • .521 gallon (1.972 liter) per revolution.
  • 208 gallons per minute  (47.2 cubic meters per hour) nominal capacity.
    
    

As of this writing, this rectangular in-feed positive displacement lobe pump is in stock at ALARD, in EXCELLENT condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y5776

CABBAGE CORER,
continuous rotary coring machine...

ALARD-Smith four (4) head semi-automatic cabbage coring machine for coleslaw, sauerkraut and other fresh-cut processing applications. A head of cabbage is manually placed core-side up on the rotating table as a hold-down lowers to secure it in place while the coring blade routes out the core. The cored cabbage head is then ejected from the machine via the discharge.

FEATURES:

• Manufacturer rated for up to 28 heads per minute.
  
  
• Clockwise rotating table with manual product placement.
  
  
• Currently outfitted with standard sauerkraut core chopping blades - can be changed to arrowhead style coring blades for full core removal (e.g. for fresh cabbage processing).
  
  
• 32 inch working height.
  
  
• Operator control box with ON/OFF switch.
  
  
• Stainless steel food contacts and painted steel frame.
  
  
• 1.5 HP drive motor.
  
  
• 208 / 230 volt 3 phase electrical input.

As of this writing, this semi-automatic cabbage coring machine is in-stock, in EXCELLENT condition and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial volume fresh-cut process equipment needs.

ALARD item reference #: Y5781

DEMO VIDEO
URSCHEL Model GK-A DICER,
slicer, strip cutter, dicer
French fry cutter,
CUTTING POTATOES...

DEMO VIDEO
Urschel model GK-A slicer, dicer, strip cutter, french fry cutter,
cutting potatoes,
From Alard Food Processing and Packaging Equipment,
Alard item reference #: Y5505

A three-dimensional cutting machine, manufacturer rated for products input-sized up to 5.5 inches (140mm) in any dimension. Manufacturer recommends for uniform flat or crinkle cuts, for dices, cubes, French fry strips, julienne cuts and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-hour output.

Three cutting dimensions:

• Slice thickness: from 1/8 inch (3.2mm) up to 5/8 inch (16mm) -- knob adjustable.
  
  
• Circular knives: from 1/8 inch (3.2mm) to 3 inches (76mm) -- spacers and number of knives determine cut size.
  
  
• Crosscut knife spindle spacing: from 9/32 inch (7.1mm) up to 3 (76mm) inches -- change part.
  
  
• By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel GKA can also cut strip cuts (two-dimensional cuts) such as for french fries, and slices (single dimensional cut).
  
  
• Use of flat cut or crinkle cut knives determine flat or crinkle cut output.
  
  
• We can complete this machine with cutting parts to fit most standard cutting specifications -- CALL 315-589-4511 to discuss cutting specifications!
  
  

FEATURES:

• Stainless steel slice shell and impeller with 10 inch slice shell opening.
  
  
• All food grade USDA sanitary stainless steel construction including spindles, guards, shrouds and tubular stainless steel frame.
  
  
• Factory control box with safety interlock system.
  
  
• 2 HP drive motor.
  
  
• 208 / 230 volt 3 phase electrical input.

As of this writing, this reconditioned Urschel GKA dicer is in stock, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial process capacity fruit & vegetable cutting equipment needs.

ALARD item reference #: Y5505

COATING DRUM SEASONING REEL,
continuous
rotary seasoning applicator drum,
stainless steel...

This type of food grade continuous tumble mixer is widely used as a seasoning application system for gently applying dry and liquid spices & flavorings, to a wide variety of food products including potato chips, tortilla chips, crackers, nuts, seeds, snack mixes, popcorn, coffee beans, pet foods / pet snacks, cereals, frozen foods, pasta, and shredded cheeses. The ribbed interior of this seasoning applicator mixing reel allows for the application of vegetable oils, spices, seasonings and flavoring formulations to delicate products with a minimum of product stress or breakage.

FEATURES:

• 30 inch diameter by 84 inch long stainless steel coating reel / seasoning drum:
  
  
  • Four (4) 1 inch high fixed triangle shaped flights.
    
    
  • 9 inch long section with 3/16 inch perforations.
    
    
• 50 inch high infeed, 38 inch discharge height with height adjustable legs.
  
  
• Food grade sanitary stainless steel drum assembly mounted on a painted steel frame.
  
  
• Trunnion drive powered by 1HP stainless steel shrouded motor.
  
  
• 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this continuous coating drum is in stock at ALARD, in GOOD OPERATING condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y5881

FAM Model ILC-3D DICER,
high volume industrial
food grade cutter...

The FAM ILC-3D dicer, similar to the Urschel Diversacut line, is specifically designed to accept large in-feed products up to 10 inches long, providing similarly long cuts such as for  vegetable noodles. A versatile, tons-per-hour industrial food process cutting machine / dicer / slicer / julienne cutter, which uniformly cuts flat or crinkle cut dices, cubes, strips / strip cuts, french fry cuts, vegetable noodle cuts, and slices from a wide variety of food products at high production capacities with speeds dependent on materials, application and machine configuration. This dicer is designed with precise cut tolerances with slice adjustment / lock-down features which allow fine-tuning and ultimate precision.

MANUFACTURER SPECIFICATIONS:

• Slice Shell 3/32 inch (2mm) to 1 1/8 inch (28mm).
  
  
• Circular Blade Spindle 3/32 inch (2.4mm) to 1.5 inch (40mm).
  
  
• Crosscut spindle 4/25 inch (4mm) to 2.25 inch (60mm).
  
  
• Flat or crinkle cuts.
  
  
• Will accept products up to 9 inch (225mm) diameter.
  
  
• Throughput of 15,432 lb/hr (7,000 kg/hr) depending on product and cut.
  
  

FEATURING:

• Four (4) paddle impeller.
  
  
• 10 inch diameter crinkle slice drum.
  
  
• Set with 1/2 inch (12mm) cut crosscut spindle.
  
  
• Includes 1.5 inch (38mm) & 2 inch (51mm) cut circular knife spindle.
  
  
• 72 inch high infeed, 40 inch discharge height.
  
  
• Lube cluster for ease of maintenance.
  
  
• All food grade sanitary stainless steel construction.
  
  
• 5HP drive motor.
  
  
• 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this FAM dicer is in stock at ALARD and available in GOOD OPERATING condition with timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food process cutting machine requirements.

ALARD item reference #: Y4349