METAL DETECTOR with BELT CONVEYOR, PUSH-OFF REJECT, 12x10 opening,
food grade...

A refurbished Loma IQ2 metal detector, with pneumatic push off reject, on a stainless steel thru-conveyor. A food grade belt transfer metal detection system for food processing and/or other industrial process packaging applications.

FEATURES:

• 12.5 inch high by 9.75 inch wide net USABLE aperture opening with the conveyor belt in place.
  
  
• Stainless steel belt-transfer through-conveyor with a 96 inch long by 8 inch wide interlocking plastic chain type belt.
  
  
• Pneumatic PUSH-OFF reject system with notification buzzer.
  
  
  • 32 inch long reject conveyor. NOTE: The reject conveyor is separate from the through-conveyor, so that the reject arm pushes rejected product onto this separate belt.
    
    
  • 6 inch high adjustable UMHW guide rail.
    
    
• Stainless steel search head enclosure.
  
  
• Integral digital operator controls for metal detection head.
  
  
• 36 inch working height on threaded rod height-adjustable feet.
  
  
• 1/2 HP conveyor drive with variable speed control.
  
  
• 208 / 230 volt 3 phase electrical input.

This refurbished METAL DETECTOR is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & pneumatic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food inspection needs.

ALARD item reference #: Y5905

BROTHERS LEGROW
CENTRIFUGAL
VEGETABLE SPIN DRYER,
140 lb capacity...

A food grade batch centrifuge drying system for leafy and/or pre-cut produce products, such as fresh-cut lettuce, onions, shredded carrots and other similar fresh bagged type products.

FEATURES:

• Removable 24 inch diameter by 22 inch deep (6.28 cubic feet) basket with 3/16 inch perforations.
  
  
• Manufacturer rated for 140 lb maximum capacity.
  
  
• All food grade stainless steel construction including mounting base with rubber vibration isolation mounts.
  
  
• 5 HP belt drive motor with guard.
  
  
• Hinged lid with elastic lift assistance straps.
  
  
• 2 inch diameter bottom side drain.
  
  
• Operator ON/OFF controls with mechanical safety switch (cuts power to machine if lid is opened).
  
  
• 208 / 230 / 460 volt 3 phase electrical input.
  
  

As of this writing, this Brothers Spin Dryer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y5167

Eillert model CH-U-RR
SPIN DRYER,
with PLASTIC BASKET...

A compact food grade centrifugal dryer, with Eillert engineered quality construction, for fresh produce processing plants and other similar institutional and industrial food applications. Uses light plastic baskets which can be inserted and removed by hand; without need of an overhead winch. Ideal for dewatering fresh-cut vegetable products after washing, in the context of industrial produce packing and fresh-cut processing operations producing bagged salads, packaged fruits, herbs, shredded lettuce, chopped greens and other leafy or shredded vegetable products.

FEATURING:

• Uses a 1.5 cubic foot (11.5 gallon capacity), 16.5 inch top diameter by 14 inch deep, perforated plastic baskets.
  
  
  • Light plastic dryer basket can be placed, removed and dumped by hand without aid of an overhead hoist or other apparatus.
    
    
  • Basket size easily fits under cutting machines, dewatering shakers and other upstream sources.
    
    
• 3.5 inch diameter side drain.
  
  
• Control box with variable speed & timer.
  
  
• Equipped with a safety interlock system and E-stop.
  
  
• All food grade sanitary stainless steel construction with UMHW plastic lid.
  
  
• 1 HP (1740 rpm) belt drive motor.
  
  
• 208 / 230 volt 3 phase electrical input.
  
  
• Includes one (1) basket.

As of this writing, this Eillert vegetable centrifuge is in-stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 for availability and discuss your precut produce packing equipment needs.

ALARD item reference #: Y5953

DEMO VIDEO
FAM DICER
cutting hash brown potatoes...

FAM Model ILC-3D DICER,
high volume industrial food grade cutter
Video Demo

The FAM ILC-3D dicer, similar to the Urschel Diversacut line, is specifically designed to accept large in-feed products up to 10 inches long, providing similarly long cuts such as for vegetable noodles. A versatile, tons-per-hour industrial food process cutting machine / dicer / slicer / julienne cutter, which uniformly cuts flat or crinkle cut dices, cubes, strips / strip cuts, french fry cuts, vegetable noodle cuts, and slices from a wide variety of food products at high production capacities with speeds dependent on materials, application and machine configuration. This dicer is designed with precise cut tolerances with slice adjustment / lock-down features which allow fine-tuning and ultimate precision.

MANUFACTURER SPECIFICATIONS:

• Slice Shell 3/32 inch (2mm) to 1 1/8 inch (28mm).
  
  
• Circular Blade Spindle 3/32 inch (2.4mm) to 1.5 inch (40mm).
  
  
• Crosscut spindle 4/25 inch (4mm) to 2.25 inch (60mm).
  
  
• Flat or crinkle cuts.
  
  
• Will accept products up to 9 inch (225mm) diameter.
  
  
• Throughput of 15,432 lb/hr (7,000 kg/hr) depending on product and cut.
  
  

FEATURES:

• Four (4) paddle impeller.
  
  
• 10 inch diameter crinkle slice drum.
  
  
• Set with 1/2 inch (12mm) cut crosscut spindle.
  
  
• Includes 1.5 inch (38mm) & 2 inch (51mm) cut circular knife spindle.
  
  
• 72 inch high infeed, 40 inch discharge height.
  
  
• Lube cluster for ease of maintenance.
  
  
• All food grade sanitary stainless steel construction.
  
  
• 5 HP drive motor.
  
  
• 208/230/460 volt 3 phase electrical input.

As of this writing, this FAM dicer is in stock at ALARD and available in VERY GOOD OPERATING condition with timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food process cutting machine requirements.

ALARD item reference #: Y4349

COLUMN LIFT CART DUMPER
USDA, food grade stainless steel...

Roser Column Lift Dumpers are designed to lift standard meat trolley carts or buggies from the floor to tip them to dump into your downstream food processing equipment. The screw-driven dumper provides quick lifting speeds for maximum efficiency as well as added safety & durability.

FEATURES:

• 70 inch to 90 inch adjustable dump pivot.
  
  
• Manufacturer rated up to 660 lb and fits standard dumper carts.
  
  
• 26 inch wide cradle - fits standard meat buggies.
  
  
• Screw type lift action.
  
  
• Operator controls with Up, Down & E-Stop switches.
  
  
• 2 HP drive motor.
  
  
• 208/230 volt 3 phase electrical input.
  
  

As of this writing, this Meat Buggy Lift is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food handling needs.

ALARD item reference #: Y6025

COLUMN LIFT CART DUMPER,
buggy dumper, trolley tipper,
USDA, all stainless steel...

E-QUIP Column Dumpers are renowned for quality and dependability. The Model 320 standard duty column cart dumper is manufacturer rated to handle up to 1,000 lbs and equipped with an anti-drop lock feature to prevent free-fall in the event of chain failure. Designed to lift standard meat trolley carts or buggies from the floor, and to tip them to dump into your downstream food processing equipment. 

FEATURING:

• 74 to 94 inch adjustable dump pivot.
  
  
• Manufacturer rated for up to 1,000 lb lift capacity.
  
  
• 26 inch wide cradle - fits standard meat buggies.
  
  
• Chain type lift action.
  
  
• Anti-drop lock feature for added safety.
  
  
• Operator controls with Up & Down switches.
  
  
• 2 HP drive motor.
  
  
• 208/230 volt 3 phase electrical input.

As of this writing, this meat buggy lift & dump is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food handling needs.

ALARD item reference #: Y6024

Wilden DIAPHRAGM PUMP,
1 inch inlet-outlet,
food grade stainless steel...

A pneumatic powered food grade WILDEN model P2/SSPPP/FSS/FS/SFS/2020 Pro-Flo FDA series flap valve pump with 1 inch inlet / outlet ports, and ball check valves, recommended for pumping viscous & non-viscous liquids, syrups, sweeteners, pastes, sauces, creams, fruit fillings, gels, pastes, and purees, with suspended & non-suspended solids; as well as for non-food applications.

FEATURING:

• Manufacturer rated for:
  
  
  • 45.2 gallons per minute (maximum).
    
    
  • Up to 0.13 inch sized particulates.
    
    
  • Product Temperature range of 32F - 175F.
    
    
• 1 inch center horizontal inlet/outlet with 1.5 inch sanitary Tri-clamp connections.
  
  
• Self priming.
  
  
• FDA approved food grade stainless steel construction.
  
  
• Compressed air input required for operation.
  
  

As of this writing, this Wilden Pro-Flo FDA series diaphragm pump is in stock at ALARD, in EXCELLENT operational, mechanical & pneumatic condition, ready for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food grade pumping equipment needs.

ALARD item reference #: Y6072

URSCHEL Model GK / GK-A DICER,
strip cutter, crinkle cut french-fry
cutting machine...
 

A three-dimensional fruit and vegetable cutter, specified for cutting all the same flat dice and flat strip cuts as the Urschel Model G and / or G-A, but also capable of crinkle dices, and krinkle strip cuts e.g. for crinkle cut French fries; accepting product input sized up to 5.5 inches (140mm) in any dimension.

Manufacturer recommends for uniform dices, strips, and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, beets, lettuce, cabbage, broccoli, cauliflower, sweet potatoes, squash, carrots, mushrooms, turnips, cantaloupe, endive, tomatoes, cucumbers, horseradish, apples, grapefruit, citrus peel, papaya, pineapple, peaches, celery, rutabagas, melon rind, and many other foods; producing clean, uniform, high-quality tons-per-our output.

Three cutting dimensions:

• Slice thickness is hand-wheel adjustable from 1/8 inch (3.2mm) to 3/4 inch (19.1mm).
  
  
• Crosscut knife spindle (change part) - available in spacings from 9/32 inch (7.1mm) to 7/8 inch (22.2mm).
  
  
• Circular knives can be spaced from 3/32 inch (2.4mm) to 3 inches (76.2mm).
  
  
• By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel G-K dicer can also make juliennes and strip cuts (two-dimensional cuts) such as for flat or crinkle-cut French fries.
  
  

FEATURING:

• Can cut flat or crinkle-cuts, with appropriate cutting parts: Call 315-589-4511 to discuss your particular cutting specification(s).
  
  
• Food grade sanitary stainless steel product contacts.
  
  
• Stainless steel shrouding, frame, knives & cutting spindles.
  
  
• Stainless steel slice shell and impeller.
  
  
• 7 inch slice shell opening.
  
  
• This machine was built and the manufacturer tag is stamped as a model "GK", but it's cutting parts and castings have been replated and updated to all stainless steel contacts, USDA sanitary compliant; equivalent to the GK-A model.
  
  
• Aftermarket control box with safety interlock system.
  
  
• 2 HP belt drive motor.
  
  
• 208 / 230 volt 3 phase electrical input.

As of this writing, this reconditioned Urschel cutter / dicing machine is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available immediately --needing only cutting parts for your particular food process cutting requirement.

CALL 315-589-4511 to confirm availability and discuss your particular industrial food process cutting specification.

ALARD item reference #: Y5955

VIBRATING DEWATERING SHAKER,
grader, vibratory feeder, 96x36,
food grade, stainless steel...

A HMI Heinzen vibratory feeder with bolt-in screens for grading, size sorting, fines removal, grading out shorts, solids separation, dewatering and even-feeding whole or cut food products to downstream components in an industrial food processing line.

Also see Y6013 DEMO VIDEO HERE.

FEATURES:

• 36 inch wide by 96 inch long shaker bed:
  
  
  • 6 inch long dimpled surface infeed section.
    
    
  • Two (2) removable / replaceable PERFORATED screen sections:
    
    
    • 36 inch long each.
      
      
    • 1/8 inch diameter perforated.
      
      
    • Bolt-in style.
      
      
  • 26 inch long dimpled surface discharge section.
    
    
  • 6 inch high sides.
    
    
• Two (2) overhead mounted spray bars.
  
  
• 94 inch high infeed, 86 inch discharge height.
  
  
• Stainless steel water collection pan with 10 inch diameter bottom outlet.
  
  
• Open channel frame for ease of sanitation.
  
  
• All food grade sanitary stainless steel construction.
  
  
• Vibratory action provided by two (2) rotary/eccentric drives.
  
  
  • Powered by 0.4 HP motors.
    
    
  • Variable speed control.
    
    
• 208 / 230 volt 3 phase electrical input.
  
  
  

As of this writing, this vibrating conveyor is in stock at ALARD, in VERY GOOD condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food process conveying equipment needs.

ALARD item reference #: Y6013

PRESSURE BRAISING PAN,
TILT SKILLET, 45 gallon,
food grade, stainless steel...

The Electrolux Thermaline pressurized griddle is an electric fired multi-functional pressure-cooker appliance for roasting, braising, simmering, boiling, steaming, sous vide AND PRESSURE COOKING for reduced cook times.

FEATURES:

• 45 gallon capacity.
  
  
• 21.5 inch by 41.5 inch wide by 11.5 inch deep pan.
  
  
• Motor assisted power tilt to dump.
  
  
• Pressure-cooker configuration, with locking hinged stainless steel lid:
  
  
  • Gasketed for 6.5 psi working pressure.
    
    
  • Safety release vent to prevent over-pressurizing.
    
    
  • Heat proof lift handle.
    
    
• Digital temperature control & timer for precise cooking.
  
  
• Food grade sanitary stainless steel construction.
  
  
• 208 / 230 volt 3 phase electrical input.

As of this writing, this 45 gallon tilting pressure cook skillet is in stock at ALARD, in GOOD operational condition and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food process cooking kettle needs.

ALARD item reference #: Y6018

BELT BLANCHER, STEAM BLANCHER,
food grade, stainless steel,
hydrostatic fruit and vegetable
thermal blanching tunnel,
20x2 belt...

An A.K. Robins BELT STEAM BLANCHER for steam blanching of vegetable and fruit products prior to freezing or canning in an industrial food processing operation.

FEATURES:

• 20 foot long by 26 inch wide stainless steel wire mesh belt with fine 1/8 inch wide openings runs through the steam tunnel.
  
  
  • 2 foot long open belt infeed and discharge sections, with 16 foot length of travel in steam / steam vapor exposure.
    
    
• Top and bottom steam headers (over and above the belt), each with (2) zone input connections for live steam injection.
  
  
• Five (5) hinged top covers, each of which rests on all four sides in a system of hydrostatic-water-seal troughs, to prevent steam from escaping.
  
  
• Fully INSULATED body and covers.
  
  
• Vinyl flaps at each end to keep steam from escaping from the infeed and discharge.
  
  
• Six (6) side cleanout access for under-belt cleanout access (3 per side).
  
  
• Steam stacks at each end.
  
  
• All food grade USDA sanitary stainless steel construction.
  
  
• Highly polished "scalloped" stainless steel cosmetic finish.
  
  
• 3/4 HP 3 phase mechanical variable speed drive geared for 18 to 80 inches per minute belt speed.
  
  

As of this writing, this hydrostatic steam belt blancher is in process at ALARD, and will soon be available for shipment in EXCELLENT operational, mechanical & cosmetic condition.

CALL 315-589-4511 to confirm availability and discuss your specific fruit & vegetable blancher requirement.

ALARD item reference #: Y6028