SINGLE-STATION
NETWEIGH BAG PACKING TABLE,
with wash-down scale, and
adjustable-height pneumatic bag-holder,
all food grade stainless steel...

The Alard model BT1D is an American made, food grade sanitary 304 stainless steel BAG FILLING TABLE / hand-pack bag filler for fresh-cut produce packaging, with a remote readout scale, and adjustable height pneumatic bag-holder, for filling pre-cut produce and other food products into bags by weight. Ideal for whole, diced, or chopped vegetables and fruits, shredded or whole leafy vegetable products, and salad mixes.

OPERATION:

• The operator hangs the bag on the bag-filling funnel and engages the bag holder by pressing a button.
  
  
• The operator then pulls product by hand, from the table into the filling tube, until the proper weight is made, as indicated by the eye-level over/under scale. A little product can be easily removed if needed to "make weight".
  
  
• The operator then disengages the bag holder and removes the bag, puts a new bag in place, and the process is repeated.
  
  

FEATURES:

• The stainless steel bag-filler / pack table is 43 inches long by 37.5 inches wide inner/working dimensions, and has sides that taper from 14 inches high at the back, and angles down to 6 inches high at the front.
  
  
• The "D" in BT1D stands for "drain". This table features a liquid drain with strainer for sanitation and / or draining excess moisture from wet product(s).
  
  
• 30 lb capacity Cardinal wash-down over-under scale, with remote readout mounted at eye level. Other model scales / capacity are / is available to customer specification; CALL 315-589-4511 to discuss your particular fruit and/or vegetable bag weigh-filler specifications.
  
  
• 6.25 inch diameter front center filling tube, comes with removable insert for 2-inch diameter discharge spout. Call 315-589-4511 to discuss your particular filling specifications. 
  
  
• Stainless steel pneumatic bag holder with push-button operator control for holding bag on the filling tube.
  
  
• Beneath the bag holder is a 12 inch wide by 10 inch front-to-back stainless steel weigh cell platform which is adjustable to accommodate different bag heights.
  
  
• 40 inch working height at front lip, on threaded rod adjustable feet with foot-pads.
  
  
• All food grade sanitary 304 stainless steel construction.
  
  
• Made in the USA.
  
  
• 110 volt single phase electrical input (standard household current) for the scales, and requires compressed air for the bag holders.
  
  
• NEW!
  
  

As of this writing, this hand-pack bag filling table is in stock new at Alard, available for immediate shipment.

CALL 315-589-4511 to confirm present availability, and to discuss your particular pre-cut produce / fresh produce packaging equipment needs.

Alard item reference #: Y6043