ROD BELT CONVEYOR, 72 x 15,
food grade, stainless steel...

A 6 foot long by 15 inch wide rod belt Dunkley takeaway conveyor / grading belt, previously used with a Dunkley Cherry pitter (not included, available separately) to convey pitted cherries away from the pitting machine, with belt spacing to allow any loose pits to drop through.

Ideal for its original purpose, but could as well be used as a cleaning / grading conveyor (which would allow fines to drop through), a feed conveyor, takeaway conveyor, or transfer conveyor for a wide range of raw, peeled, or cut fruits and vegetables, and/or packaged food products in a pre-cut produce packing or other industrial food manufacturing process environment. The open belt could also be set over a tank as a dewatering conveyor, and / or used with overhead sprays (not included) for rinsing or washing food products.

FEATURES:

• 72 inch long by 15 inch stainless steel rod belt, with 3/16 inch rods on spacings allowing for 3/8 inch openings.
  
  
• The belt runs between stainless steel sides that flare out to a width of 20.5 inches.
  
  
• All food grade stainless steel construction, with corrosion resistant plastic bearing blocks, 4 inch diameter plastic belt pulleys, and stainless steel shafts.
  
  
• Fractional HP 208/230 volt 3 phase drive.
  
  
• Did not come with, does not include a bottom catch pan or legs, but we can fabricate to buyer specification at extra charge. Can be configured as an elevating conveyor, horizontal conveyor, or lowerating conveyor, per customer requirement. CALL 315-589-4511 to discuss your bulk food product handling needs.
  
  

As of this writing, we have this stainless steel rod-belt conveyor in stock in EXCELLENT operational, mechanical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food equipment needs.

ALARD item reference #: Y5830

Crepaco R6BS, Dairy Sanitary
POSITIVE DISPLACEMENT PUMP,
with drive and stainless steel base,
USDA 3A dairy sanitary...

An APV Crepaco dairy sanitary positive displacement lobe pump with 3 HP motor and stainless steel base. Manufacturer recommended for pumping viscous fluids, slurry and/or particulate bearing liquids in industrial food, dairy, canning, bakery, beverage & pharmaceutical processing applications.

FEATURES:

• 3 inch inlet and discharge ports with sanitary threaded connections in a horizontal flow orientation.
  
  
• USDA / 3A Dairy sanitary food grade pump with 316T stainless steel food contacts - easy disassembly for cleaning & sanitation.
  
  
• Manufacturer rated for maximum capacity of 240 gallons per minute throughout (depending on product viscosity and head pressure).
  
  
• Manufacturer rated for up to 900 RPM.
  
  
• 3 HP drive motor.
  
  
• 460 volt 3 phase electric input.
  
  

As of this writing, this Crepaco lobe pump is in stock at ALARD, in GOOD OPERATING condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial food process bulk material handling needs.

ALARD item reference #: Y1767

Urschel COMITROL PROCESSOR
Model 3600, 10 HP, slant mount...

A compact Comitrol processor mill for small volume to high capacity production operations. Widely used for rework of gelatin capsules, biscuits, candy, noodles and a full spectrum of bakery goods. Manufacturer recommended for reducing meats, fish, textured vegetable protein, fruits, vegetables, spices, seaweed, cheeses, chemical and pharmaceutical applications.

FEATURES:

• Tapered infeed hopper 8.5 inches front-to-back by 12 inches wide with safety baffles.
  
  
• 3 inch cutting head -- manufacturer offers a wide range of cutting heads and impellers for particle sizes ranging from coarse to fine emulsions / powders / granules.
  
  
• Cutting chamber / cutting head mounted at a slanted angle to facilitate product in-feed.
  
  
• 61 inch high infeed, 30 inch discharge height.
  
  
• Continuous operation for uninterrupted production.
  
  
• Designed for easy clean-up and operation.
  
  
• Food grade sanitary stainless steel product contact surfaces and support frame construction.
  
  
• Mounted on 6 inch locking casters for added mobility.
  
  
• Factory control box with safety interlock system.
  
  
• 10 HP drive with brake-motor.
  
  
• 460 volt 3 phase electrical input.

As of this writing, this Urschel Comitrol 3610 milling machine is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial volume food cutting equipment needs.

ALARD item reference #: Y6119

Votator 6x72 HEAT EXCHANGER,
scrape-surface / swept surface,
3A dairy sanitary...

A Waukesha Cherry-Burrell Votator II scraped-surface heat exchanger, steam jacketed and insulated, for continuous closed loop heating or cooling of pumpable fluids or slurries, viscous, sticky, or particulate laden products. Uses a rotating shaft with blades to continuously scrape the product from the heat transfer surface, ensuring efficient heat transfer, and preventing fouling. For bringing products to uniform temperatures for a broad range of industrial applications, including food processing, pharmaceutical & chemical production.

FEATURES:

• 6 inch diameter by 72 inch long barrel:
  
  
  • Plastic scraper blades.
    
    
  • 3 inch diameter product inlet/outlet.
    
    
• 150 psi jacket / 600 psi shell:
  
  
  • U-stamped.
    
    
  • 9 square foot heat transfer area.
    
    
  • 1.5 inch diameter inlet/outlet.
    
    
  • Insulated.
    
    
• Horizontally mounted on a stainless steel base.
  
  
• Gasketed PVC control box with ON/OFF.
  
  
• 3A dairy rated food grade stainless steel construction.
  
  
• 10 HP drive motor.
  
  
• 460 volt 3 phase electrical input.
  
  

As of this writing this tube swept surface heat exchanger is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y5255

Robins Drago
DESTONER, WASHER, RINSER,
Model TME (Tramp Metal Eliminator)
food grade, all stainless steel...

DEMO VIDEO
Robins Drago TME Tramp Metal Eliminator
DESTONER
Alard item Y3613

The Robins Drago washboard tramp metal eliminator (TME) is designed to remove foreign materials as small as rocks, stones, pebbles, gravel, sand, glass, bone and / or metal contaminants as small as .020 inch in size, as long as the food product is less dense than the foreign matter and the specific gravity of the foreign matter is less than one. Manufacturer recommended for dried beans, vegetables, fruits, pickles, seafood and many other destoning applications.

FEATURES:

• Manufacturer rated for a maximum throughput of approximately 7,000 to 10,000 lbs per hour.
  
  
• 24 inch wide by 56 inch long riffle board type operation.
  
  
• Flush lift lever for debris removal and/or daily sanitation practices.
  
  
• 36 inch wide by 88 inch long by 36 inch deep tank.
  
  
  • Side mounted tank catches trash / stones dislodged from the riffle troughs.
    
    
  • Inlet, outlet & side tank drains / clean-outs.
    
    
• 24 inch wide by 64 inch long wire woven stainless steel elevating discharge belt.
  
  
• NEW 2-inch submersible water circulation pump - approximately 150 gallons per minute, 110 volt single-phase electrical input (standard household current).
  
  
• All food grade sanitary stainless steel construction.
  
  
• Stainless steel shrouded washdown motor, 208/230 volt 3 phase.

As of this writing, this riffle board destoner is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food washing needs.

ALARD item reference #: Y3613

Hycor Rotostrainer, Model 2512
ROTARY DRUM SCREEN
for liquid / solids separation,
food grade stainless steel...

An externally fed rotary wedgewire screen, self-cleaning rotating drum screener, for separating liquids and solids, such as product recovery,  wastewater recovery, dewatering and/or liquid-solids separation in industrial food  processing and other industrial-process applications.

OPERATING PRINCIPLE:

• Unfiltered liquids are fed via an 3 inch diameter inlet into a head tank which directs the liquid / solid slurry onto the outside of the 25 inch diameter by 12 inch long wedgewire strainer reel which has .060 inch sieve openings.
  
  
• The self-cleaning strainer drum cylinder rotates so that any solids which stick to the outside of the drum are scraped off by a stainless steel doctor blade and drop off the edge.
  
  
• Meanwhile, the liquid is filtered through the wedgewire sieve screen and discharges through a 6 inch diameter bottom outlet.
  
  
• Additional screen clearing action is provided by a stainless steel spray header running through the center of the wedge-wire cylinder.
  
  

FEATURING:

• Food grade stainless steel construction including stainless steel screener drum, cabinet and support frame.
  
  
• 1/2HP drive turns the rotary screen reel.
  
  
• 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this self-cleaning wedgewire screening reel is in stock at ALARD, in EXCELLENT operational condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your waste water recovery needs.

ALARD item reference #: Y6036

INDUCTION CAP SEALER,
Enercon Super Seal Touch 500,
for tamper-evident caps...

An Enercon Model LM5609-06 induction cap sealer for in-line continuous automatic heat induction tamper evident cap sealing for food and beverage safety.

FEATURES:

• Quick change sealing head included for 24mm to 38mm cap diameters.
  
  
• Compact, modern, air-cooled system design.
  
  
• Stainless steel head enclosure with integral touchpad operator control panel.
  
  
• Stainless steel stand adjustable for height from 32 inches to 45 inches at the induction sealing head, to position over your existing container conveyor line.
  
  
• Stalled bottle detector, foil sensor & cocked cap detector included.
  
  
• 208 / 230 volt 3 phase electrical input.

As of this writing, this Enercon Super Seal INDUCTION CAP SEALER is in stock at ALARD, in EXCELLENT operational, electrical, mechanical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food packaging tamper prevention equipment needs.

ALARD item reference #: Y5211

Breddo Likwifier
150 gallon LIQUEFIER,
20HP...

A Breddo Model LDD Likwifier 150 gallon Liquifier, manufacturer recommended for dissolving and dispersing virtually any food product in low to medium viscosity liquid, including stabilizing gums, synthetic thickeners, flours, cocoas, yeast, powdered ingredients such as powdered eggs, starches, condiments, caseinates, juice concentrates, food purees,whey solids, milk solids, and to emulsify products such as salad dressings, fillings, ice cream mixes, sauces, and many other items. It is also used for reconstitution of dairy products and reestablishment of soluble products, preparation of starch and hydrocolloid solutions.

A high-shear mixer, emulsifier, blender, this liquifier FEATURES:

• 37 inch by 37 inch by 26 inch deep square body mixer vessel.
  
  
• 3 inch bottom side outlet with sanitary Tri-Clamp connection.
  
  
• Dust filter / bag dumping infeed station...
  
  
  • 31 inch wide by 18 inch high cylinder assisted lift door.
    
    
  • Safety pour grid.
    
    
  • Filter feature included in AS-IS (running) condition without controls.
    
    
• All food grade USDA sanitary stainless steel construction.
  
  
• 25 HP 1745 rpm direct drive motor powers the impeller.
  
  
• 460 volt 3 phase electrical input.

As of this writing, this Breddo liquefier is in stock at ALARD, in EXCELLENT operational, mechanical & cosmetic condition - available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial food process high-shear mixing needs.

ALARD item reference. #: Y5970