Rietz EXTRUCTOR Model RE-24,
meat grinder, block grinder,
pre-breaker, 60 HP...

DEMO VIDEO
Rietz EXTRUCTOR Model RE-24,
meat grinder, block grinder,
pre-breaker, 60 HP, Alard item Y6142

A Rietz Bepex RE-24-K7E333 EXTRUCTOR industrial pulverizer machine, engineered with slow speed and high torque for fracturing, crushing, grinding and tearing large blocks or barrels of bulk materials, such as animal products, meats, cheese, fruits and/or vegetables.

FEATURES:

• 20 inch long by 30 inch wide infeed opening.
  
  
• 24 inch diameter rotor.
  
  
• 28-spoke discharge plate / die plate / extrusion plate.
  
  
• Heavy duty tubular painted steel frame.
  
  
• Food grade sanitary stainless steel product contact surfaces.
  
  
• 60 horsepower chain drive motor.
  
  
• 460 volt 3 phase electrical input.
  
  

As of this writing, this Rietz EXTRUCTOR / pre-breaker is in stock at Alard in EXCELLENT operational, mechanical, electrical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food process cutting, grinding, pulverizing & particle reduction size needs.

ALARD item reference #: Y6142

CLOSED LOOP
HEAT PUMP DEHYDRATION DRYER,
for drying fruit, vegetable,
and other food products...

An IKE Model number WRH-300A closed loop heat pump dehydration dryer for fruit and vegetable drying, and other food processing applications, for gentle, uniform, energy-efficient food preservation that protects nutrients, color, and flavor. 

The closed loop heat pump concept replaces the traditional open-loop vaporization drying approach with  innovative closed-loop dehydration drying, achieving 100% energy recycled. It has been successfully used to dry fruits, vegetables and other fresh produce, herbs, spices, nuts, seeds, fishery products, meat products, tobacco, fabrics, wood, and other products.

Intended for use in your drying room or enclosure, the heat pumps circulates hot and dry air first absorbs the moisture inside the material and passes through a cold panel in the dryer. This moist air is then drawn back through the heat pump's evaporator to cool, condense the water, and drain it away. The recovered heat energy is then recycled to reheat the now-dry air, minimizing energy waste and preventing heat from escaping the system. Since no hot vapor is lost during the drying process, no energy is wasted, making the closed-loop heat pump dehydration dryer highly efficient with low energy consumption.

Details and SPECIFICATIONS:

• Mfg rates for 10 liters per hour dehydration capacity.
  
  
• Previously used for a drying room on mangoes.
  
  
• Requires an outlet to remove condensate water from the drying room or enclosure.
  
  
• R401A refrigerant, 2000 grams capacity. 
  
  
• 220 volt single phase, 13.3 amp rated current, 6000 watt maximum input power. 
  
  

As of this writing, this dehydrator heat pump drying system is in stock at Alard in very good operational condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food dryer, dehydration equipment needs.  

Alard item reference #: Y5949

FOOD GRADE
WATER FLUME DISCHARGE CHUTE,
stainless steel...

A food grade, stainless steel catch tank and overflow for connecting a food pump flume to a vibrating dewatering shaker. Water and solids from a flume or pipeline are fed into this dewatering conveyor feed chute, so that water and product overflow and are evenly spread on the vibrating dewatering conveyor.

FEATURES:

• 24 inches long by 18 inches wide by 19 inches deep overflow chute.
  
  
• 19.5 inch tank divider about 4 inches from infeed.
  
  
• 4 inch diameter threaded drain to the right side of the flow from the perspective of one standing at the infeed end looking downstream. 
  
  
• Feed from top or pump through the inlet from the bottom. 
  
  
• Previously used with (not included) Key Iso-Flo vibratory dewatering shaker.
  
  
• Curved discharge overflow "hump".
  
  
• All food grade sanitary stainless steel construction 

As of this writing, this dewatering shaker feed chute is in stock at Alard, in very good condition, available for immediate shipment. 

CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.  

Alard item reference #: Y6037

FOOD GRADE VAT, stainless steel, rectangular, surge tank, recirculation tank, for food processing...

An approximately 360 gallon food grade stainless steel rectangular water-catch and recirculation tank for potable liquids, such as process water in an industrial food processing application.

This surge tank, overflow tank, is suitable for use as a water catch tank, water recirculation tank, to work in concert with food processing equipment (not included) such as root crop vegetable washers, scrubbers, peelers, vibratory screeners, dewatering shakers, vibrating graders, chill flumes, food pumps, and or other whole or pre-cut produce fruit and vegetable processing and packing operations.

FEATURES:

• "Main Tank" is 65 inches long by 36 inches wide by 38 inches deep.
  
  
• Beyond the main tank is an 9 inch overflow with a threaded bottom discharge at the right corner (from the perspective of one standing at the infeed end looking "downstream".
  
  
• 46 inches to "top lip" as configured. 
  
  
• All food grade sanitary stainless steel construction.
  
  
• Previously used as a water catch tank for a (not included) HMI / Heinzen vibratory dewatering conveyor.

As of this writing, this screening and recirculation tank is in stock at Alard in good usable condition, and available for immediate shipment. 

CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

Alard item reference #: Y6039

FOOD GRADE VAT, stainless steel, rectangular, surge tank, recirculation tank, for food processing...
 

An approximately 135 gallon food grade stainless steel rectangular tank for recirculation and screening of potable liquids, such as process water in an industrial food processing application.  

This surge tank, overflow tank, is suitable for use as a water catch tank, and/or water-screening recirculation tank, to work in concert with food processing equipment (not included) such as root crop vegetable washers, scrubbers, peelers, vibratory screeners, dewatering shakers, vibrating graders, chill flumes, food pumps, and or other whole or pre-cut produce fruit and vegetable processing and packing operations. 

FEATURES:

• "Main Tank" is 41 inches long by 35.5 inches wide by 23 inches deep.
  
  
• Beyond the main tank is an 8 inch overflow with a threaded bottom discharge at the left corner (from the perspective of one standing at the in-feed end looking "downstream".
  
  
• 27 inches to "top lip" as configured. 
  
  
• Removable perforated screen (slide out with handle).
  
  
• All food grade sanitary stainless steel construction.

As of this writing, this screening and recirculation tank is in stock at Alard in good usable condition, and available for immediate shipment. 

CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

Alard item reference #: Y6038

COLUMN LIFT, CART DUMPER,
PORTABLE BUGGY DUMPER,
USDA food grade sanitary
stainless steel...

A-One Workhorse Column Dumpers are reliable, safe & efficient. The Model CDR-600-82-S standard duty column cart dumper is manufacturer rated to handle up to 600 lbs and equipped with a chain brake safety feature.

FEATURES:

• 70 to 90 inch adjustable dump height.
  
  
• Manufacturer rated for up to 600 lb lift capacity.
  
  
• 26 inch wide cradle - fits standard meat buggies.
  
  
• Chain brake feature for added safety.
  
  
• Mounted on a factory caddy frame with casters & floor brake - does not require bolting to floor.
  
  
• Food grade USDA sanitary stainless steel construction.
  
  
• Operator control panel with Up, Down & Stop switches.
  
  
• Electric drive motor.
  
  
• 208 / 230 volt 3 phase electrical input.
  
  
• Includes one (1) cart.
  
  

As of this writing, this meat buggy lift & dump is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food handling needs.

ALARD item reference #: Y6005

URSCHEL Model GKS SLICER,
for flat or crinkle slice cuts...
 

A simple, yet rugged, high-speed centrifugal slicing machine manufacturer recommended for cutting a wide variety of produce including beets, potatoes, carrots, cabbage, lettuce, eggplant, cucumbers, pickles, cranberries, apples, pears, strawberries, tomatoes, peaches and more. Engineered for continuous tons-per-hour industrial-scale production, in a simple design for easy clean-up & maintenance. Able to slice flat strip cuts as well as crinkle strip cuts.

SPECIFICATIONS per manufacturer literature:

• Slice thickness easily (knob) adjustable for slice thicknesses from 1/16 inch (1.6mm) up to 5/8 inch (16mm).
  
  
• Accepts product input up to 5.5 inches (140mm) in any dimension. Larger products must be precut. Large heads of cabbage, for example, must be quartered before slicing.
  
  
• The GKS SLICER can cut either flat or corrugated / crinkle slices.
  
  
• Crinkle cuts made with the Model GKS will have 3 1/3 crinkles to the inch, with a depth of .070 inch (1.8mm).
  
  
• This cutting machine is for industrial food processing applications, with capacity for 3,000 to 36,000 lbs per hour depending on product and cut size.
  
  
• At reduced capacities, this slicer will make slab cuts / sandwich cuts, slicing the full length of oblong products such as potatoes, carrots, and pickles, but the products must not be longer than 5 inches.
  
  
• This slicer will not cross-cut elongated products, the Urschel Model OV, which we also have in stock as of this writing, is used for crosscut slicing. Call 315-589-4511 to discuss your particular industrial food process slicing machine specification.
  
  
• Some products may need to be frozen or tempered for firmness to be successfully cut with this machine. Call 315-589-4511 to discuss your particular industrial food process cutting machine application.
  
  

OPERATION:

• Product is fed thru a hopper into a rotating impeller for high-capacity continuous production.
  
  
• Centrifugal force holds product against inside of slice case as impeller blades carry product past slicing knife.
  
  
• Distance between adjustable case gate and slicing knife determines slice thickness.
  
  
• Slicing case has a corrugated inner surface capable of producing crinkle-cut slices.
  
  

FEATURES:

• Food grade sanitary stainless steel product contacts and stainless steel frame.
  
  
• Stainless steel 7 inch opening slice shell.
  
  
• On/Off control box.
  
  
• 2 HP  belt drive motor.
  
  
• 208/230 volt 3 phase electrical input.

As of this writing, this reconditioned Urschel slicer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial food processing cutting machine needs. 

ALARD item reference #: Y6017

PISTON DEPOSITOR /
BAKERY DEPOSITOR,
pneumatic powered, food grade...

The UNIFILLER DECO-MATE 3 was originally designed to replace the conventional pastry bag. A frosting pump for decorating cakes, cupcakes, pastries and other bakery items. Equally applicable for dispensing sauces, oil, dressing, cheese sauces, fruit spreads, fruit fillings, jelly, jam, peanut butter and more.

FEATURES:

• 13.5 inch diameter by 16 inch deep hopper.
  
  
• 3 inch diameter by 6 foot long flexible applicator hose.
  
  
• ON/OFF finger toggle switch.
  
  
• Full washdown, tool-free design for quick cleaning and fast product changeover.
  
  
• All food grade sanitary stainless steel construction with Tri-clamp fittings.
  
  
• Requires 4 cfm @ 20-80psi pneumatic air input.
  
  
• A wide range of attachments are available direct from the manufacturer.
  
  

As of this writing, this Unifiller Decomate is in stock at ALARD, in EXCELLENT condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y6029

SINGLE PISTON VOLUMETRIC FILLER /
DEPOSITOR...

The Unifiller Universal Econo 1000i Series is a pneumatically operated food grade stainless steel food depositor and filling machine for filling containers, or for use as an ingredient depositor for adding sauces or other liquid food ingredients to other food products. Fills viscous liquids such as sauces, creams, pastes, and oils, including products with particulates such as salsa.

FEATURES:

• Manufacturer rated for:
  
  
  • Particulates up to 3/4 inch diameter.
    
    
  • Up to 80 cycles per minute.
    
    
• Pneumatically operated, air actuated piston:
  
  
  • 3 inch diameter by 10 inch long stroke piston.
    
    
  • 0.5 to 36 ounce fill per stroke.
    
    
  • Manual crank volume adjustment - no tools required.
    
    
• 14 inch diameter by 17 inch deep conical product hopper.
  
  
• 1.5 inch Tri-Clamp outlet.
  
  
• Support frame with manual height adjustment.
  
  
• All food grade sanitary stainless steel construction.
  
  
• Full washdown design.
  
  
• Mounted on casters for ease of mobility.
  
  
• 4 cfm @ 80 psi compressed air input required for operation.
  
  
• Does not include a discharge valve-spout; --a variety of attachments are available direct from the manufacturer suitable for different applications.
  
  

As of this writing, this refurbished Unifiller single head piston filler is in stock at ALARD, in EXCELLENT operational, mechanical, pneumatic & cosmetic condition, ready-to-go for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y6033

Urschel Model RA DICER
Model RA-A DICER...

A 3-dimensional fine dicing machine for a wide range of dice and strip cuts from a variety of products such as relish, salsa, fruits, vegetables, nuts, cheeses and processed meats. Stainless steel plated cutting parts, USDA sanitary compliant.

FEATURES:

• This machine was built and the manufacturer tag is stamped as a model "RA", but it's cutting parts and castings have been replated and updated to all stainless steel, USDA sanitary compliant; equivalent to the RA-A model.
  
  
• Maximum product input size of 3.5 inches (88.9mm) in any direction.
  
  
• Bypass feed chute bypasses the first dimensional slice, allowing for
  
  
• Three cutting dimensions (or two-dimensional cuts using aforementioned bypass feed chute).
  
  
  • Slice thickness: 1/16 to 3/8 inch (1.6 to 9.5mm) -- knob adjustable.
    
    
  • Circular knife cuts: 1/8 to 1 inch (3.2 to 25.4mm) -- knives & spacers.
    
    
  • Crosscut knife cuts: 0.05 to 3 inch (1.3 to 76.2mm) -- change part: Call 315-589-4511 to tell us YOUR cutting specification!
    
    
• USDA food grade sanitary stainless steel product contact surfaces; refurbished with castings freshly replated.
  
  
• Stainless steel control panel.
  
  
• Safety interlock system which cuts power to the machine if chutes or guards are removed, with maintenance lock-out.
  
  
• Stop switches on front and back sides of the machine.
  
  
• 5 HP stainless steel shrouded 3 phase drive motor.
  
  
• 208 / 230 volt electrical input.

As of this writing, this refurbished Urschel RAA is in stock at ALARD, in EXCELLENT operational, mechanical, electrical, and cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your high-capacity food process cutting machinery needs.

ALARD item reference #: Y5939

Agrimat BELT SLICER, FRUIT STRIP CUTTER,
continuous, food grade sanitary, stainless steel.

An Agrimat BELT SLICER for cutting fruit products into strips.  Previously run on mangoes, but can also be used for other products, such as cored, halved peaches, apples, or other similar products.

FEATURES:

• Continuous operation for high-capacity production.
  
  
• 9 foot long by 18 inches wide carrier belt, running between 2 inch high stainless steel sides.
  
  
• The belt consists of a continuous series of UHMW plastic carriers which are grooved to let the blades pass through them as the belt carries the product through the blades.
  
  
  • Each carrier has a 5.75 inch long by 16 inch wide pocket for product to be placed between two inch high cleats. 
    
    
  • In the middle of each carrier is a 3/4 inch non-slotted spacer which effectively separates the carriers / belt into two lanes (unless you want to cut 3/4 inch all the way across). 
    
    
• Blades are fixed, but can be added or removed on 3/8 inch spacings for strip cuts of 3/8 inch, or 3/4  inch, or 1.5 inch, and so on...
  
  
• If belt fed, 43 inch infeed height from the end, or if hand-fed 42 inch infeed height from the sides; on 5 inch high casters (two locking).
  
  
• Hinged knife cover for ease of sanitation and maintenance (wired to safety interlock system, cuts power to the machine if the cover is opened).
  
  
• Food grade stainless steel construction.
  
  
• Stainless steel control box with variable speed control, E-stop button, safety interlock system, cable pull E-stop over the belt, along with a beacon on the top of the control panel to signal a stoppage.
  
  
• Aluminum shrouded motor, with aluminum shrouded gear reducer. 
  
  
• 208 / 230 volt 3 phase electrical input.
  
  

As of this writing, this fruit strip cutter is in stock at ALARD, in good operational condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial fruit processing  cutting equipment needs.

ALARD item reference #: Y5945

CENTRIFUGAL PUMP,
1.5 inch inlet, 1.5 inch outlet,
food grade, stainless steel...

A TRI-CLOVER Model C114 stainless steel body centrifugal pump designed for small flow capacity with minimum head pressure for a multitude of fluid handling applications ranging from food products, washing, rinsing, recirculation, irrigation, general industrial & municipal use.

FEATURES:

• 4 inch diameter 3-blade impeller.
  
  
• 1.5 inch diameter inlet / 1.5 inch diameter outlet with Tri-clamp fittings.
  
  
• Food grade sanitary stainless steel pump, 316T stainless steel wetted parts.
  
  
• 5/8 inch shaft - appropriate for up to 1HP drive motor (not included).
  
  
• Pump curves available upon request.
  
  

As of this writing, this centrifugal pump is in stock at ALARD, in GOOD OPERATING condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial food process pump and bulk material handling needs.

ALARD item reference #: Y5779

LOGICAL Model S-5
SEMIAUTOMATIC NETWEIGH FILLER,
single lane linear scale...

A food grade vibratory feed, linear scale bulk and dribble filling machine for fill-by weight, for particulate, granular, and free-flowing food products.

FEATURES:

• 3.5 cubic foot stainless steel in-feed hopper with adjustable slide gate, at a 67 inch infeed height.
  
  
• Food grade sanitary stainless steel product contacts.
  
  
• Comes with factory-option upgrades: large platform option, hopper baffle option, and rigidized surface stick-resistant dimpled surface vibrating feed pan option.
  
  
• Powder coated steel support frame. Stainless steel frame available at extra cost. Call 315-589-4511 to discuss your food product filling machine application.
  
  
• Manufacturer rated for up to 400 containers per hour (depending on fill weight), and capacity for up to 50 lbs maximum fill.
  
  
• Digital touch-pad operator control...
  
  
  • Adjustability and controller readout to .01 lbs.
    
    
  • Auto-tare weight adjustment.
    
    
  • Comes configured with foot-pedal activation for semiautomatic operation. Optional photo-eye or relay activation setups are available. Call 315-589-4511 to discuss your food product container filling application.
    
    
  • 110 volt single phase (standard household current).
    
    
• Compact footprint, fits in four square feet of floor space.
  
  

As of this writing this fill-by-weight granular / particulate food product filling machine is in stock in excellent operational, mechanical electrical, and cosmetic condition, ready to go and available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food process filling machine needs.
 

Alard item reference #: Y6129

Spray Dynamics
SCARF PLATE DRY INGREDIENT DISTRIBUTOR,
food grade, stainless steel...

A Spray Dynamics Unispense SF-100 vibratory scarf feeder, dry ingredient applicator. Accurately dispenses dry coatings to a tumble drum, blender or conveyor belt. The Sure Flow is designed to minimize bridges and voids. Suitable for powders, granules, shreds and natural seasonings without added flow agents.

FEATURES:

• 10 inch by 15 inch by 27 inch deep hopper with pour grid.
  
  
  • Pneumatic vibrator
    
    
  • Low level sensor.
    
    
  • Quick disconnect agitator powered by 1/2 HP motor.
    
    
• 22 inch long positive displacement Delrin auger transfer tube.
  
  
• 3 inch wide by 40 inch long tapered SCARF PLATE FEEDER powered by a Syntron Magnetic vibrating shaker.
  
  
• Factory control box with:
  
  
  • Variable speed controls for product transfer and scarf feeder.
    
    
  • Safety interlock system.
    
    
• Food grade sanitary stainless steel construction.
  
  
• 208 / 230 volt 3 phase electrical input.

As of this writing, this dry seasoning applicator is in-stock at ALARD, in LIKE NEW operational, mechanical, electrical & cosmetic condition - available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y6145

ROTARY WASHER, SCREENING REEL,
dewatering drum, 90x36,
food grade, stainless steel...

Described by a variety of names, this high quality Blentech-made, food grade ROTARY DRUM WASHER, cleaning reel, dewatering reel, root crop tumble washer, rinser, is useful as a dirt reel to clean raw produce from the field, for liquid-solids separation for process water recovery, and or as a fruit and vegetable rinser for industrial-capacity  food processing applications, including frozen foods, canning, raw produce, pre-cut produce, and fresh-cut produce. For whole or cut products, including potatoes, carrots, beets, turnips, beans, rice, and others.

FEATURES: 

• 7 foot 6 inch long by 36 inch diameter stainless steel screening drum / screening reel with 3/32 inch perforations, and 5 inch high sprial flights on 12 inch spacing.
  
  
• (2) stainless steel spray headers, one inside the reel, and one outside the reel, to wash or rinse food products such as root crops, and to prevent screen blinding.
  
  
• Full length stainless steel  water catch pan under the reel.
  
  
• Mounted at an angle on a stainless steel frame, and "runs uphill". 
  
  
• All food grade sanitary stainless steel construction.
  
  
• Previously used inline after a blancher for rinsing rice. Blancher not included, but we have them if you need them: Call 315-589-4511 to discuss your food process cooking, cooling, rinsing and washing needs. 
  
  
• Qty (2) .75HP 208 / 230 volt 3 phase drives. 
  
  

As of this writing, drum type tumble washer is in stock at Alard, in VERY good operational condition, available for immediate shipment. 

CALL 315-589-4511 to confirm availability, and to discuss your particular food grade liquid-solids separation, washing, screening and rinsing equipment needs.

Alard item reference #: Y5874

INSPECTION CONVEYOR,
9.5 feet long by 28 inches wide,
food grade, stainless steel...

A bidirectional inspection belt, takeaway conveyor, or feed conveyor, for industrial food processing of fruits and vegetables.

FEATURES:

• 9.5 foot long by 18 inch wide solid (non-perforated) interlocking plastic-chain type belt, at a 36 inch working height on threaded rod adjustable feet.
  
  
• Multiple bolted-on (removable) UHMW plastic diverter rails to center or otherwise direct product as it moves across the conveyor. 
  
  
• Belt rinsing and water catch pan on one end.
  
  
• Food grade sanitary stainless steel wash-down construction.
  
  
• Bottom mounted motor-in-roller drive for reversible, bi-diretional operation. 
  
  
• 208 / 230 volt drive.

As of this writing this food process inspection table is in stock at Alard, in very good operational condition, and available for immediate shipment. 

CALL 315-589-4511 to confirm availability, and to discuss your particular food process product inspection equipment needs.

Alard item reference #: Y5426

Canco 006 CAN SEAMER...

An American Can Company (Canco) Model 006 can closing machine.

FEATURES:

• DISC infeed.
  
  
• Automatic lid feed.
  
  
• Change parts / set for 401 diameter, seaming head 24-281 seaming head for 307-404 diameter can range.
  
  
• Atmospheric closure.
  
  
• 3 HP 208 / 230 / 460 volt 3 phase drive.
  
  

As of this writing, this Canco can seamer is in stock, in good condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial canning equipment / canning machine needs.

 Alard Item Reference #: Y2350