VIDEO demonstration of reconditioned URSCHEL CC-D SLICER,
SHREDDER / STRIP CUTTER / GRANULATOR,
shredding potatoes...

  Demonstration Video
Urschel CC-D slicing machine,
cutting potato shreds,
Alard item Y6208

The Urschel CC-D slicing machine is manufacturer recommended for shredding, slicing, strip cutting and/or granulating a wide variety of food products including, but not limited to cheese, potatoes, coconut, cranberries, cooked meats, pet food and surimi.

A range of cutting head setups are available for this machine with over a dozen different types of cuts, including flat cuts, "V" slices, "Flat-V" shreds & slices, crinkle cut potato chips, match-stick cuts, strip cuts, full shreds, V-shreds, oval shreds, crescent shreds, wide crescent shreds, and various options for grating, on input of up to 3.5 inches (88.9 mm) in any dimension. Call 315-589-4511 to discuss your particular cutting specification.

FEATURES:

• USDA / DAIRY sanitary food grade stainless steel construction.
  
  
• Stainless steel slice shell, impeller and 18 inch diameter cone hopper.
  
  
• Marchant Schmidt tubular support frame, with  diamond plate platforms on each side of the cutter,  locking casters, provides for approximately 87 inch infeed height and 60 inch discharge height.
  
  
• Previously used with a discharge skirt and funnel to fill into 55 gallon drums (see demo video), but also well-configured for cutting over a bin, tote or tank
  
  
• Shown in video demo with shred cutting head -- other cutting setups available, please CALL 315-589-4511 with your cutting specification!
  
  
• Complete with 5HP brake-motor drive, stainless steel factory control box, and Urschel safety interlock system.
  
  
• 460 volt 3 phase electrical input.
  
  

As of this writing, this refurbished Urschel slicer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and to discuss your food processing needs.

ALARD item reference #: Y6208

DEMONSTRATION VIDEO of refurbished URSCHEL Model CC-D
SLICER / SHREDDER / STRIP CUTTER / GRANULATOR,
cutting potato shreds...

Video Demo of Urschel CC-D
shredding potatoes,
Alard item Y6207

The Urschel CC-D is manufacturer recommended to shred, slice, strip cut or granulate a multitude of food products ranging from cheese, potatoes, coconut, cranberries, cooked meats,  pet food and surimi. A range of cutting head setups are available for this machine with over a dozen different types of cuts, including flat cuts, "V" slices, "Flat-V" shreds & slices, crinkle cut potato chips, match-stick cuts, strip cuts, full shreds, V-shreds, oval shreds, crescent shreds, wide crescent shreds, and various options for grating, on input of up to 3.5 inches (88.9 mm) in any dimension...

FEATURES:

• USDA / DAIRY sanitary food grade stainless steel construction.
  
  
• Stainless steel slice shell, impeller and 18 inch diameter cone hopper.
  
  
• Marchant Schmidt tubular support frame, with  diamond plate platforms on each side of the cutter,  locking casters, provides for approximately 87 inch infeed height and 60 inch discharge height.
  
  
• Previously used with a discharge skirt and funnel to fill into 55 gallon drums (see demo video), but also well-configured for cutting over a bin, tote or tank
  
  
• Shown in video demo with shred cutting head -- other cutting setups available, please CALL 315-589-4511 with your cutting specification!
  
  
• Complete with 5HP brake-motor drive, stainless steel factory control box, and Urschel safety interlock system.
  
  
• 460 volt 3 phase electrical input.
  
  

As of this writing, this refurbished Urschel slicer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and to discuss your food processing needs.

ALARD item reference #: Y6207

RECONDITIONED SPIN DRYER,
Bock Model FP-90...

This refurbished Bock / North Star Engineered Products (NSEP) model FP-90 Centrifuge is a food grade stainless steel centrifugal drying machine for drying washed fruits and vegetables, including leafy vegetables, whole or cut, in the context of an industrial pre-cut produce packing operation.

FEATURES:

• 7.36 cubic foot removable basket measuring 30 inches in diameter by 18 inches deep.
  
  
  • 3/8 inch fluted perforated basket.
    
    
  • Lifting "ears" on each side of the basket provide for overhead winchlift-out and easy swivel-dumping action.
    
    
• Manufacturer rated 130 lb (dry weight) batch capacity for up to 1,950 lbs of product per hour.
  
  
• Lid-opening assist cylinders.
  
  
• Includes operator controls and safety interlock system - machine won't start with the lid open as lid locks during spin cycle.
  
  
• Durable hydraulic transmission.
  
  
• Pneumatic brake.
  
  
• All food grade stainless steel construction including basket, tank & base.
  
  
• 5 HP belt drive motor.
  
  
• 208/230 volt 3 phase electrical input.
  
  

As of this writing, this like-new BOCK FP90 spinner is in stock at ALARD, in EXCELLENT operational, electrical, mechanical & cosmetic condition, ready-to-go and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular fresh-cut/ pre-cut produce packing equipment needs.

ALARD item reference #: Y6125

BIN DUMPER / TOTE DUMPER
for up to 40 by 48 inch bins,
food grade, stainless steel,
hydraulic powered;
--IN STOCK NEW...

Alard Model BD40 food grade stainless steel forward bulk box dumper, for discharging vegetables, fruits, food products, or other bulk materials from heavy bins, crates, totes, and/or Gaylords. Typically used as a raw product infeed dumper for industrial food processing applications. In stock new and available for fast delivery.

FEATURES:

• Sized for standard 40 inch by 48 inch bin, or smaller, with bin holder measuring 45.75 inches wide by 48 inches long by 42 inches deep.
  
  
• Manually adjustable hold-down bar with adjustment steps for 28.5 inches high, 35.5 inch bin height, and 53.5 inches high bin clearance. Other hold-down settings can be provided on request; --CALL 315-589-4511 with your tote size specifications.
  
  
• Food grade stainless steel dumper construction, including heavy duty tubular stainless frame.
  
  
• Dump action provided by 3.5 inch diameter hydraulic cylinders powered by a self-contained 2 HP hydraulic power pack with reservoir and manual controls, set for 208 / 230 / 460 volt 3 phase electrical input (unless otherwise specified).
  
  
• Comes set for FLOOR LEVEL INFEED with a 38 inch pivot point and a 40 inch dump height from the edge of the dumper in a 45 degree fully inverted position (over all height and dump height from bin depend on the height of the bin). Support stands to raise the height of the dumper are available as an option and will be quoted upon request, based on customer specifications. Call 315-589-4511 to discuss your needs. 
  
  ~ Made in the USA. 

As of this writing, we have this American-made food grade stainless steel floor-level infeed BIN DUMPER is IN stock NEW and available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food process bulk material handling needs.

Alard item reference #: Y6198

VIBRATING DEWATERING SHAKER,
87x24, food grade, stainless steel...

A Commercial food grade vibratory grader, vibratory feeder, vibrating conveyor, with quick-release interchangeable screen for grading, size sorting, fines removal, grading out shorts, solids separation, dewatering and even-feeding whole or cut food products to downstream components in an industrial food processing line.

FEATURES:

• 24 inch wide by 7.25 foot long shaker bed:
  
  
  • 18 inch long smooth solid infeed section.
    
    
  • Removable / replaceable WEDGEWIRE screen sections:
    
    
    • 48 inch long.
      
      
    • 1/8 inch rods and 1/8 inch sieve -- rods are inline with flow.
      
      
    • Quick-release screen retainer clamps for fast screen replacement / changeover.
      
      
  • 1 inch step / drop to 26 inch long solid surface discharge section.
    
    
  • 5 inch high stainless steel sides.
    
    
• 41 inch high infeed, 35 inch discharge height.
  
  
• Stainless steel collection pan for grading, fines removal, liquid-solids separation, waste water reclamation, with 4 inch diameter front bottom outlet.
  
  
• All food grade sanitary stainless steel construction including tubular frame and legs.
  
  
• Ajax eccentric driven by 1 HP 230 / 460 volt 3 phase motor.

As of this writing, this vibrating conveyor is in stock at ALARD, in EXCELLENT operational, mechanical & cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food process conveying equipment needs.

ALARD item reference #: Y4866

COATING DRUM SEASONING REEL, continuous rotary seasoning applicator drum, all stainless steel...

This Marchant-Schmidt food grade continuous tumble mixer is widely used as a seasoning application system for gently applying dry and liquid spices & flavorings, to a wide variety of delicate food products including potato chips, tortilla chips, crackers, nuts, seeds, snack mixes, popcorn, coffee beans, pet foods / pet snacks, cereals, frozen foods, pasta, and shredded cheeses. The ribbed interior of this seasoning applicator mixing reel allows for the gentle application of vegetable oils, spices, seasonings and flavoring formulations to delicate products with a minimum of product stress or breakage.

FEATURES:

• 30 inch diameter by 84 inch long stainless steel coating reel / seasoning drum (including discharge cone).
  
  
  • 25 inch diameter infeed.
    
    
  • 12 inch long discharge cone with 24 inch diameter discharge opening.
    
    
  • Eight (8) fixed triangle shaped soft flights.
    
    
• Manually adjustable drum pitch.
  
  
• Trunnion drive powered by 1/2 HP drive motor.
  
  
• All food grade sanitary stainless steel construction including removable side guards.
  
  
• 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this Marchant Schmidt continuous coating drum is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y6120