A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

October 2026 Archives

HOT WATER BELT BLANCHER , pasta cooker, self-contained, gas fired, Y6218

BELT BLANCHER, PASTA COOKER,
gas-fired water blancher,
food grade, stainless steel...


y6218zf-used-gas-fired-belt-blancher-pasta-cooker.jpg

An MBC Food Machinery BELT CONVEYOR PASTA BLANCHER for HOT WATER blanching of pasta products, including ravioli, shells, lasagna strips, tortellini and cavatelli. Originally designed and used as a pasta cooker, this draper-type blancher with full-length hold-down belt, is also applicable for heat treating vegetables and fruits prior to freezing, canning, or drying, including such products as asparagus, broccoli, green beans, and many other food products. This self-contained hot water blanching system with an on-board natural gas fire-tube heating system, is in stock at Alard in excellent condition...

FEATURES:

  • y6218b-used-gas-fired-belt-blancher-pasta-cooker.jpgConveyor system powered by a 1/3 HP variable speed motor:

    • 16.5 foot long by 18 inch wide stainless steel wire mesh belt with 5/16 inch by 3.5 inch openings.

    • 12 foot long hold-down stainless steel wire mesh belt.

  • 22 inch wide by 14 foot long by 19 inch deep tank.

  • y6218l-used-gas-fired-belt-blancher-pasta-cooker.jpgNatural GAS FIRED 3 inch diameter immersion tube heating system.

  • Powered hood & conveyor hoist with chain drive 1HP motor.

  • Stainless steel factory control panel.

  • All sanitary food grade stainless steel construction.

  • 460 volt 3 phase electrical input.

As of this writing, this gas-fired hot-water blancher is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition - available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food processing equipment needs.

ALARD reference #: Y6218

Steam jacketed RIBBON BLENDER, end discharge, food grade, stainless steel, in stock, Y6282

40 cubic foot, single shaft, steam-jacketed,
DOUBLE RIBBON BLENDER,
with end-gate discharge, JACKETED, food grade, stainless steel...

y6282e-used-mueller-steam-jacketed-ribbon-blender.jpg

 

A Mueller horizontal shaft RIBBON MIXER, with a double-helix / double ribbon agitator, end gate discharge and bottom steam jacketed U-shaped shell, for rapid and thorough blending of wet, dry or granular food products.

FEATURES:

  • 36 inch wide by 60 inch long by 40 inch deep "U" shaped trough vessel with a double-spiral ribbon agitator:

    • y6282n-used-mueller-steam-jacketed-ribbon-blender.jpg5.5 inch diameter shaft.

    • 2 inch wide by 1/4 inch thick inner ribbons.

    • 3 inch wide by 1/4 inch thick outer ribbons.

    • Pneumatic gland bearings.

  • Steam jacket:

    • 90psi at 400F.

    • NB coded and U-stamped.

    • Pressure tested.

  • y6282l-used-mueller-steam-jacketed-ribbon-blender.jpgHinged safety / pour grid.

  • Pneumatic powered 16 inch wide by 6 inch high end-gate discharge.

  • 87 inch infeed height, 48 inch high discharge.

  • y6282j-used-mueller-steam-jacketed-ribbon-blender.jpg15 HP chain drive motor with 20 rpm gear box.

  • Food grade sanitary stainless steel construction.

  • 208 / 230 / 460 volt 3 phase electrical input.

  • Compressed air input required.

As of this writing, this Mueller 40 cubic foot ribbon blender is in stock at ALARD, in EXCELLENT operational, mechanical, electrical, pneumatic & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial food process blending equipment needs.

ALARD item reference #: Y6282

Food grade TUMBLE MIXER, cement-mixer-style, Y6201

FOOD TUMBLE MIXER,
10 cubic foot
stainless steel drum type batch mixer,

tilt discharge...

y6201h_crop_crop_email.jpg

A food grade stainless steel tumble mixer, in a "cement mixer" configuration for food process batch mixing and blending applications, for gentle dividing, folding, and tumbling action, with inline infeed and discharge with power tilt to dump. Well suited for mixing and blending wet or dry particulate products, spices, cut fruit, diced vegetables, salsa, sauces, wet salads (fruit salad, macaroni salad, potato salad) and/or other ingredients and products for industrial food processing production.

FEATURES:

  • y6201_crop_email.jpgFood tumbler mixer barrel has a 26 inch diameter infeed / discharge opening.

  • 36 inch diameter by 38 inch deep <>10 cubic foot batch mixer drum with (3) 29 inch long by 6 inch wide lifting paddles.

  • Power tilt discharge.

  • Tubular stainless steel tumbler support stand set for a 84 inch high infeed, 38 inch discharge height.

  • All food grade stainless steel construction.

  • 1 HP drum drive with variable speed control.
  • y6201g_crop_email.jpgStainless steel electrical box with 460 volt 3 phase electrical input.

As of this writing, this batch tumble mixer is in stock at ALARD, in VERY GOOD operational, mechanical, electrical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y6201

Urschel Comitrol 2100 PROCESSOR MILL, 40HP, in stock, refurbished, Y6168

Urschel COMITROL PROCESSOR,
Model 2100, 40HP...


y6168o_urschel_comitrol_2100_40hp_refurbished.jpg

 

The Urschel Comitrol 2100 is a continuous food grade milling machine, with a large feed hopper and positive displacement screw feed. Manufacturer recommended (with cutting parts specific to application) for particle size reduction for industrial food processing applications, including production of food pastes, pates, purees, bakery product reworks, flakes, comminuting, granulating, milling, liquefying, dispersing, emulsifying, granulation (e.g. of cheeses), and etc.

Manufacturer literature highlights applications such as fresh meats, frozen tempered meats, chicken nugget emulsions, flaked beef products, salmon paste, seaweed flakes, baby food, fruit & vegetable purees, cartilage/organ/skin processing and more.


FEATURES:

  • y6168w_urschel_comitrol_2100_40hp_refurbished.jpg6 inch diameter 3 inch cutting head; can be paired with a variety of impellers for coarse to fine reductions. A wide variety of cutting parts are available from the manufacturer for this machine, and we also have other Comitrol Mills in stock configured with slicing or microcut cutting parts for different applications. CALL 315-589-4511 to discuss your specific cutting specifications.

  • y6168x_crop_email.jpgAgitated infeed hopper powered by 2HP motor.

  • 4 foot long bottom screw feed with 3HP drive motor.

    • Variable speed to control infeed rate.

  • 64 inch high infeed, 29 inch discharge height.

  • Food grade USDA sanitary

  • Stainless steel construction including support frame.

  • 40 HP brakemotor drive.

  • y6168l_urschel_comitrol_2100_40hp_refurbished.jpgGasketed stainless steel factory electrical control box with safety interlock system.

  • 460 volt 3 phase electrical input.

As of this writing, this Urschel Comitrol Processor mill is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment. CALL 315-589-4511 to confirm availability and discuss your particular industrial food process particle size reduction needs.

ALARD item reference #: Y6168

About this Archive

This page is an archive of entries from October 2026 listed from newest to oldest.

September 2026 is the previous archive.

November 2026 is the next archive.

Find recent content on the main index or look in the archives to find all content.

Monthly Archives


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)