RECENTLY ACQUIRED at Alard Equipment Corp

A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

Commercial NS-26 SLICER, shredder for slaw, kraut, sandwich shreds, Y4497


COMMERCIAL CABBAGE CUTTER, 26 INCH,
industrial-capacity food grade stainless steel vegetable
SLICER / SHREDDER / STRIP CUTTER...


y4497e_crop_email.jpg


A Commercial Slicer Model 26NS, also known as a "Waterfall" slicer or Kibbey cutter, has long been the mainstay of the coleslaw and sauerkraut industries. Manufacturer recommended for lettuce, cabbage, onions, peppers, cucumbers, potatoes,carrots, tomatoes and celery...


FEATURING:

  • 26 inch diameter aluminum frame cutting disk with stainless steel knives; 100% cutting surface.

  • y4497g_crop_email.jpg"Three cup" counter-rotating aluminum carrying arm pusher-plow to prevent rolling and maximize throughput capacity.

  • Open infeed to easily accept heads of cabbage, lettuce and other whole vegetable products (up to 9 inch diameter).

  • Manufacturer rated for up to 25,000 pounds per hour, depending on cut size and product.

  • A range of cutting disk and blade configurations are available for one and two-dimensional cutting (slices, strip cuts, julienne cuts) in thicknesses from 1/32 to 2 inch and up to 5 inch in length. Grater blades are also available forshredding carrots, slaw, onions, and other fresh vegetables. CALL 315-589-4511 to discuss your particular industrial food process vegetable cutting / cut size specification.

  • Food grade stainless steel construction, including tubular stainless steel frame, with 52 inch infeed height and 19.5 inch high discharge and funneled discharge with 24 inch by 24 inch discharge opening.

  • y4497a_crop_email.jpgComplete with two (2) 1.5HP gear motor drives - one for main cutting wheel and the other powers plow.

  • 230/460 volt 3 phase electrical input.


As of this writing this high-capacity industrial slicing and strip cutting machine is in stock at ALARD, in good condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food process fruit and vegetable slicing and strip cutting needs.

ALARD item reference #: Y4497



Food METAL DETECTOR with CONVEYOR, 20x11, wash-down stainless steel, Y4362


FOOD PROCESS METAL DETECTOR with BELT CONVEYOR,
20x12, wash-down, all stainless steel...


y4362a_crop_email.jpg


A Cassel Metalshark2 MULTI-FREQUENCY washdown sealed stainless steel conveyorized metal detection system for industrial process applications, with...


FEATURES:

  • 10 7/8 inch (275mm) high by 19 11/16 inch (500mm) wide net USEABLE aperture opening with the conveyor belt in place...

  • The 304 stainless steel frame washdown belt transfer conveyor has a 71.5 inch (1800mm) long by 17 9/16 inch (450mm) wide interlocking plastic chain type belt, running at a 30 inch (762mm) working height, with adjustable feet allowing +/- 4 inch (100mm) height adjustment.

  • y4362d_crop_email.jpgThe thru-conveyor is complete with a belt-stop alarm reject configuration, and a variable speed control for the 110 volt single phase drive, adjustable from 16 to 75 feet per minute (approximately 5 to 23 meters per minute) belt speed.

  • A food grade metal detector specifically built for food processing and other industrial production line metal detection applications. All food grade / USDA sanitary hose-wash-down stainless steel construction (IP-67/NEMA 6 search head enclosure, IP-65/Nema4,4x,6,12 & 13 control enclosure).

  • y4362g_crop_email.jpgThe search head is complete with integral touchpad operator controls with a 5.4 inch color screen, including RS-232 and RS-485 serial data acquisition ports, and ethernet data interface, in a stainless steel enclosure. Optional data logging software is available for tracking and reporting for HACCP and other quality assurance and certification regimes.

  • 110 volt single phase (standard household current) electrical input.

  • FOUR FREQUENCY LEVELS (35kHz, 75kHz, 150kHz, and 300kHz), allowing for optimal ensitivity across an exceptionally wide range of products / product types (wet, dry, salty, meat, fruits, vegetables, fresh, frozen, hot, cold, etc) allowing for maximum versatility with the widest range of products. The optimal frequency is automatically set by the system in "product learn"mode to maximize sensitivity / minimize false rejects with your specific product.

  • y4362h_crop_email.jpgSensitivity varies depending on product run, and frequency setting (determined by product characteristics), especially where wet, salty, or acidic products that are electrically conductive introduce "product effect" into the equation, however the manufacturer rates dry sensitivity for this head, with no product in the aperture, at a maximum sensitivity of 1.7mm ferrous, 2.3mm non ferrous, and 2.7mm stainless steel at 300 kHz.

  • Quick teach feature learns new products in 4 to 7 passes.

  • The control unit allows for 120 product presets, where product presets save the frequency setting with the other tuning data.

  • Single control board technology with all control electronics on one circuit board maximizes reliability, and minimizes maintenance expenses.

  • 304 stainless steel search head and conveyor construction.

  • NEW EQUIPMENT - Includes a 2 year manufacturer warranty on hardware / parts.


As of this writing we have this metal detection system IN stock NEW available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial process metal detection need.

Alard item reference #: Y4362

Brown model 202 PADDLE FINISHER, Y4517


BROWN 202 PADDLE FINISHER
separator, pulper,
stainless steel...


y4517c_crop_email.jpg

This Brown International model 202 PADDLE FINISHER, pulper, refiner, separator, is manufacturer recommended for extracting juices and purees from fruits & vegetables, and separate fruit flesh (pulp) from fruit pits, seeds and/or other solids (stems, skins).


OPERATION:


This make / model pulping / finishing machine uses spinning paddles turning inside a perforated screen. The screens are interchangeable, and the perforation size of the screen determines the "finish" of (amount of pulp in) the product.

y4517h_crop_email.jpgLiquids (and pulp) that pass through the screen are collected in a bottom discharge pan while the solids (pits, seeds, skins) remaining inside the screen are discharged out the end.

Manufacturer recommended for industrial capacity food processing of apricots, pumpkin & squash, pears, apple, plums, prunes, figs, citrus juices, jam, soup, peanut butter, jelly and fruit nectar...



FEATURES:

  • Manufacturer rated for input rates of up to 120 gallons per minute.

  • 7 inch by 12 inch bolt-flanged infeed with a (bolted-on) 4 inch Tri-clamp connection and 3 inch tube inlet. A different infeed configuration could easily be made to bolt on to replace the existing setup.

  • y4517g_crop_email.jpgCurrently configured with 1/8 inch perforated screen -- other sizes available, CALL 315-589-4511 to discuss your pulper-finisher-separator needs.

  • Solid paddles are individually adjustable for distance to screen.

  • Stainless steel hinged side covers.

  • Bottom collection pan with 4 inch Tri-clamp outlet.

  • 5 inch by 12 inch end solids discharge at 30 inches high.

  • Food grade sanitary stainless steel construction.

  • y4517k_crop_email.jpg30 HP belt drive motor.

  • 208 / 230 / 460 volt 3 phase electrical input.

  • Currently bolted onto (and removable from) painted steel I-beam riser frame.


As of this writing, this paddle finisher is in stock at ALARD, in VERY GOOD operational, mechanical & cosmetic condition available for immediate shipment -OR- can be (at additional cost) outfitted with a stainless steel frame by our shop for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial fruit and vegetable processing pulping and finishing equipment needs.

ALARD item reference #: Y4517

8 inch FOOD PUMP with stainless steel tank and motor drive, Y4325


8-inch HYDRO TRANSPORT FOOD PUMP
with STAINLESS STEEL VORTEX TANK
and MOTOR-DRIVE.

y4325k_crop_email.jpg

Food grade pump-in-water conveyor / flume kit including Cornell 8-inch food pump, integrated with a CMI feed tank, and motor-drive. Pump whole or cut food products via pipe flume or open sluice, to cool, wash, rinse, sanitize, and/or apply preservative solutions while conveying horizontally and/or vertically for long or short distances. Ideal for food processing applications such as fruit and vegetable washing, fresh-cut / pre-cut produce hydro-cooling and chilling applications, and/or pre-heating prior to cutting, peeling, etc; including shredded lettuce and cabbage, cut romaine, whole or cut potatoes, french fries, potato chips, live fish (!), cranberries, carrots, apples, cherries, peas, broccoli, crayfish, shrimp, lettuce, green beans, nuts, peppers, olives, cucumbers, raisins, beans, corn, peaches, beets, oranges, and more.

FEATURES:

  • y4325v_crop_email.jpgCornell 8NHPP-F18K cast-iron hydro flow food pump with stainless steel impeller, eight-inch inlet and outlet. Stainless steel body pump also available; --call 315-589-4511 do discuss your specific requirements.

  • Manufacturer rated for solids handling ability for product sized up to 5 inch diameter by 9 inches in length. Larger diameter pumps are available for larger product sizes; --call 315-589-4511 do discuss your specific application requirements.

  • Expanded volute PP series pump for the ultimate in gentle handling of delicate food products. So gentle the manufacturer rates for pumping live fish!

  • Specifically designed and built for industrial food processing application use, with tons-per-hour throughput capacity.

  • Manufacturer recommends 2 or 3 to 1 ratio of water to product, with your product capacity determined by horsepower, RPM, and total dynamic head resistance. Pump curves are available by request; --call 315-589-4511 do discuss your specific application requirements.

  • y4325l_crop_email.jpgCMI stainless steel in-feed tank 48 inches long by 29.5 inches wide by 28 inches deep with a tapered bottom.

    • The tank has a 2.5 inch inner diameter NPT threaded end cleanout drain near the discharge flange end, with a valve.

  • The pump, tank and drive, are integrated, with pump and motor drive on a heavy 4 inch square tubular stainiless steel frame.

  • y4325o_crop_email.jpg7.5 HP 208/230/460 volt 3 phase belt and pulley drive.

  • Previously used as a cooling flume feed pump and configured as we received it; but if you have need for a different configuration, we are dealers for Cornell, and can offer NEW equipment configured to your exact specification; --CALL 315-589-4511 to discuss your precise requirement.


The Cornell hydro transport food pump is frequently employed to power open water flume systems, while others, pump into a closed pipe flume, which they run in a coil pattern on the ceiling to conserve floor space. The flumes provide hold time to remove heat, and extend exposure to the water, which usually includes either a sanitizing agent, or a preservative solution such as vitamin C; depending on the product. The power of the Cornell Hydro-Transport pump allows food producers to deliver their now chilled and treated food products to any point in the plant where they want to dry, mix and pack the final product.

Others use the chill flume for pre-cooling blanched (very lightly cooked to kill the active enzymes) food products in water prior to running them through an IQF freeze tunnel. Others use the cooling flume system just to convey product in water.

In every case, the powerful Cornell pump can gently move high tons-per-hour output to wherever it needs to go in the plant.

Alard also stocks and handles various kinds of dewatering, solids-separation, water recovery and filtration equipment to recover the food product from the pump water, and to recapture, treat and recirculate the water as necessary, as well as drying and packaging equipment to complete the process; all tailored to the end-user's specific food product(s) and application. Call 315-589-4511 to discuss your industrial food processing equipment need.

With Cornell's large range of hydro-transport pump size and material configurations, and with Alard's ability to configure and "gear" the pump to the buyer's specific needs, Alard's Cornell Hydro-Transport based flume kits are a superb tool for a wide variety of industrial food processing applications.

As of this writing, this Cornell food pump flume kit in in stock at Alard, in EXCELLENT operational, mechanical, and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular hydro food pump application requirements.

Alard item reference #:Y4325

Bock FP-90 SPIN DRYER test run video, Y4000

Reconditined Bock FP-90 SPIN DRYER
TEST RUN VIDEO,

Alard item Y4000


TEST RUN VIDEO
Refurbished Bock FP-90 SPIN DRYER test run,
Y4000
from Alard Equipment Corporation.


The North Star Engineered Products (NSEP) Bock FP-90 Centrifuge is a food grade stainless steel centrifugal drying machine for drying washed fruits and vegetables, including leafy vegetables, whole or cut, in the context of an industrial pre-cut produce packing operation.

FEATURES:

  • 7.36 cubic foot removable basket which measures 30 inches in diameter by 18 inches deep; with a 23 inch top opening.

    • Louvered basket perforations pull moisture out of the basket and away from the product.

    • Lifting "ears" on each side of the basket provide for overhead winch lift-out and easy swivel-dumping action.

  • Manufacturer rated 130 lb (dry weight) batch capacity, and up to 1,950 lbs of product per hour.

  • Food grade stainless steel product contacts including basket, tank, and base, with painted steel legs.

  • Lid-opening assist cylinders (new).

  • Includes (new) operator controls with 10 minute settable timer, and safety interlock system. Machine won't start with lid open, lid locks during spin cycle.

  • Durable hydraulic transmission.

  • Pneumatic brake.

  • 5HP 230/460 volt 3 phase motor.

As of this writing, this REFURBISHED BOCK FP90 spinner is in stock at Alard, in EXCELLENT operational, electrical, mechanical and cosmetic condition, ready to go and available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular fresh-cut / pre-cut produce packing equipment needs.

Alard item reference #:Y4000

Groen 2000 gallon steam jacketed KETTLE with INA agitator, Y4397


GROEN INA/2-200,
200 gallon STEAM JACKETED KETTLE
with INCLINED SCRAPER-AGITATOR...


y4397m_crop_email.jpg


A 200 gallon capacity dual-zone 100 psi steam-jacketed cooking kettle with INA scrape-surface agitation, USDA food grade sanitary stainless steel, with sanitary discharge valve and temperature probe port...


FEATURES:

  • 42 inch diameter by 45 inch deep hemispherical bottom vessel with 3 inch center bottom outlet.

  • Dual zone steam jacket manufacturer tagged and National Board coded for 100 psi working pressure.

  • y4397h_crop_email.jpgInclined scraper-agitator with drive geared for 33 RPM at the INA agitator.

  • Sanitary flush-bottom discharge valve with threaded connections, pneumatically operated.

  • Temperature probe port.

  • All USDA sanitary food grade stainless steel construction, including the (3) pipe legs.

  • y4397l_crop_email.jpg1.5HP 208 / 230 / 460 volt 3 phase agitator drive motor.

As of this writing, this Groen 200 gallon kettle with scraper agitator is in stock at ALARD, in EXCELLENT operational, mechanical & cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food process cooking kettle needs.

ALARD item reference #: Y4397

Bock FP-90 SPIN DRYER, Alard item Y4000


RECONDITIONED SPIN DRYER,

Bock Model FP-90...


y4000l_crop_email.jpg


The North Star Engineered Products (NSEP) Bock FP-90 Centrifuge is a food grade stainless steel centrifugal drying machine for drying washed fruits and vegetables, including leafy vegetables, whole or cut, in the context of an industrial pre-cut produce packing operation.


FEATURES:

  • 7.36 cubic foot removable basket which measures 30 inches in diameter by 18 inches deep; with a 23 inch top opening.

    • Louvered basket perforations pull moisture out of the basket and away from the product.

    • y4000s_crop_email.jpgLifting "ears" on each side of the basket provide for overhead winch lift-out and easy swivel-dumping action.

  • Manufacturer rated 130 lb (dry weight) batch capacity, and up to 1,950 lbs of product per hour.

  • Food grade stainless steel product contacts including basket, tank, and base, with painted steel legs.

  • Lid-opening assist cylinders (new).

  • y4000n_crop_email.jpgIncludes (new) operator controls with 10 minute settable timer, and safety interlock system. Machine won't start with lid open, lid locks during spin cycle.

  • Durable hydraulic transmission.

  • Pneumatic brake.

  • 5HP 230/460 volt 3 phase motor..


As of this writing, this REFURBISHED BOCK FP90 spinner is in stock at Alard, in EXCELLENT operational, electrical, mechanical and cosmetic condition, ready to go and available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular fresh-cut / pre-cut produce packing equipment needs.

Alard item reference #:Y4000

Urschel Comitrol 1700, 15HP, slice head, Y3873

Urschel
COMITROL PROCESSOR Model 1700,
15HP, with slicing head...


y3873a_crop_email.jpg


The Urschel Comitrol 1700 continuous food grade milling machine is manufacturer recommended (with cutting parts specific to applciaiton) for particle size reduction of free-flowing products for fruit & vegetable purees, slurries, pastes, pate, mustard, peanut butter, ketchup, baby food, horseradish, dressings, textured vegetable protein, gels, ointments, creams, liquefying, dispersing, emulsifying, etc.



FEATURES:

  • Cone hopper infeed, with safety grid in hopper.

  • Set with 30 paddle impeller and 11 blade adjustable SLICE head.

  • y3873f_crop_email.jpgManufacturer literature indicates the adjustable slicing head cuts a range from .02 inch inch (.5mm) to .060 inch (1.5mm).

  • Per manufacturer literature, maximum product input size is determined by the type of cutting head, the impeller used, and spacing within the head, but maximum input size for the slicing head configuration is 3/8 inch (9.5mm) in any dimension.

  • A wide selection of slice heads, impellers, and other change parts are available for this machine to accommodate a variety of products and cuts. CALL 315-589-4511 do discuss your particular food process particle size reduction application.

  • Grease bearings for smooth operation of high-speed cutting head.

  • Continuous operation for uninterrupted production.

  • Simplified design for ease of cleaning and maintenance.

  • Gasketed PVC electrical control with safety interlock system.

  • Food grade sanitary stainless steel construction including support frame.

  • 15HP drive with brakemotor.

  • 230 volt 3 phase electrical input to control panel.


As of this writing, this Urschel mill is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food process cutting, slicing, and milling machine needs.

ALARD item reference #: Y3873


USDA food grade sanitary stainless steel 48 inch BIN DUMPER, y4437


BIN DUMPER / TOTE DUMPER,
USDA food grade sanitary stainless steel,
for up to 48 inch wide bins,
with hydraulic power;
--IN STOCK NEW.


y4437c_crop_email.jpg


Food grade USDA sanitary stainless steel forward bulk box dumper, for discharging vegetables, fruits, food products, or other bulk materials from heavy bins, pallet boxes, crates, totes, and/or Gaylords. Typically used as a raw product infeed dumper for industrial food processing applications. In stock new and available for fast delivery.



FEATURING:

  • Sized for 48 inch wide or smaller totes, with bin-holder measuring 54 inches wide by 48 inches long by 42 inches deep.

  • Manually adjustable hold-down bar with adjustment steps for 28.5 inches high, 35.5 inch bin height, and 53.5 inches high bin clearance. Other hold-down settings can be provided on request; --CALL 315-589-4511 with your tote size specifications.

  • Food grade stainless steel dumper construction, with USDA sanitary welds on all product contact surfaces (i.e. in the bin holder); with continuously welded smooth seams all around the interior.

  • Heavy duty tubular stainless frame construction.

  • y4437_crop_email.jpgDump action provided by (2) 3.5-inch diameter hydraulic cylinders powered by a self-contained 2HP hydraulic power pack with reservoir and manual controls, set for 208 / 230 / 460 volt 3 phase electrical input (unless otherwise specified).

  • Comes set for FLOOR LEVEL INFEED with a 38 inch pivot point and a 40 inch dump height from the edge of the dumper in a 45 degree fully inverted position (overall height and dump height from bin depend on the height of the bin). Support stands to raise the height of the dumper are available as an option and will be quoted upon request, based on customer specifications. Call 315-589-4511 to discuss your specific bulk food product container dumping need.


As of this writing this NEW pallet box dumper is in stock at Alard, complete, ready to go and available from inventory for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food grade bulk material handling needs.

Alard item reference #:Y4437


Produce INSPECTION CONVEYOR, trim table, 6-8 person, stainless steel, Y4502

New Food Grade
FRUIT and VEGETABLE INSPECTION CONVEYOR,
12x24, 6 to 8 person, stainless steel...

VIDEO DEMO
Fruit and vegetable INSPECTION CONVEYOR,
trim table, 6-8 person, item reference / stock number Y4502
from Alard Equipment Corporation.


A single-level conveyorized food process inspection table with a 12 foot long by 24 inch wide conveyor belt running between 9 foot long UHMW plastic work surfaces. Ideal as a trim line for fruit and vegetable inspection, trimming, coring, sorting, and rework, sized for six to eight workstations...


FEATURES:

  • 12 foot long by 24 wide solid interlocking plastic chain type conveyor belt running between 1 3/8" high stainless steel sides.

  • High density plastic work shelves, 9 inches wide by 9 feet long, sized for six to eight person work-stations.

  • Work surfaces and inspection belt at a 37 inch working height on adjustable height feet (adjustable for approximately 32 inches to 40 inches).

  • Gasketed fiberglass control box with on / off buttons and variable speed control adjustable for up to 45 feet per minute.

  • Shown in video with standard painted steel motor and heavy duty painted steel gearbox.

    y4502_optional_wash-down_drive_crop_email.jpgAlso available with optional wash-down stainless steel motor (pictured at right) with corrsion-resistant aluminum gearbox. CALL 315-589-4511 to discuss your food process inspection and sorting conveyor specifications.

  • Food grade stainless steel construction.

As of this writing, this fresh produce inspection table, coring conveyor, trim line, is in stock at Alard, avalable NEW for immediate shipment.

Please note that other configurations are available on a build-to-order basis e.g. sizes, with lane dividers, multi level, waste cups, waste chutes, other belt speeds, etc.

CALL 315-589-4511 to confirm availability, and to discuss your particular particular food product inspection, sorting, trimming and coring needs.


Alard item reference #:Y4502

1000 pound Wolfking MEAT MIXER-GRINDER, 850 liter, 40HP, stainless steel, Y4172

Wolfking MIXER-GRINDER, model TSMG-850-200,
850 liter, 40HP.

DEMO VIDEO
Wolfking MIXER-GRINDER TSMG-850-200 Y4172
from Alard Equipment Corporation.


A Wolfking stainless steel meat mixer-grinder with twin shaft paddle mixer, bottom feed auger, and barrel, all stainless steel...


FEATURES:

  • MIXER
    • y4172y_crop_email.jpgDual shaft PADDLE mixer with nine (9) paddles per shaft.
    • W-bottom mixing vessel is 44 inches long by 44 inches wide by 32.5 inches deep.
    • Nominal 850 liters / 1,100 lbs capacity.
    • Sliding safety grid (on rollers).
    • Dual (2) new 5HP paddle agitator shaft drives.

  • y4172q_crop_email.jpgGRINDER
    • New stainless steel grinder barrel with new stainless steel auger, cutting knife, and discharge end.
    • 6.75-inch diameter grinder barrel.
    • 40HP 3 phase motor drive.

  • MIXER-GRINDER SYSTEM
    • Throughput capacity 6,500 to 13,500 lbs per hour.
    • Food grade USDA sanitary stainless steel construction, including legs.
    • Operator control panel on articularing arm.
    • y4172s_crop_email.jpgStandalone stainless steel electrical box complete with operating components, and safety interlock system.
    • Electrical requirements: 460 volt 3-phase, clean 110 volt single-phase (standard household current) control circuit.
    • Complete but for a grinding plate, which is readily available to buyer specification. CALL 315-589-4511 to discuss your particular industrial food process grinding requirements.


As of this writing, this Wolfking TSMG850 MIXER-GRINDER is in stock at Alard, in EXCELLENT operational, mechanical, electrical, and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

Alard item reference #: Y4172

Urschel Comitrol 1700, 30HP, cutting head, Y4508

Urschel Comitrol Processor Model 1700, 30HP,
with 3-inch CUTTING HEAD.

DEMO VIDEO
Urschel Comitrol 1700 30HP cutting cream corn

from Alard Equipment Corporation.


Urschel Comitrol 1700 continuous food grade milling machine, manufacturer recommended (with cutting parts specific to application) for particle size reduction of free-flowing products for granulation, slurries, pastes, patees, bakery product reworks, comminuting, granulating, milling, flaking, slicing, liquefying, dispersing, emulsifying, etc...


Manufacturer recommends (with cutting parts specific to application) for peanut butter, chicken slurries, baby food, dehydrated potato flakes, fruit and vegetable pastes, horseradish and dressings, extruded products, textured vegetable protein, biscuits and cookies, nuts, fruit pulp, various spices, corn masa, hard cheeses, and a variety of gels, ointments, and creams.

FEATURES:

  • Set up for Urschel Comitrol CUTTING HEAD for which a variety of sizes of cut heads and impellers are available for a wide range of product applications, with cutting dimensions from .010 inch (254mm) up to 1.5 inch cuts from product up to 2.5 inches (63.5mm) in size. We also have Comitrol mills in stock with slicing heads for slice cuts, or Microcut heads for very small particle size cuts. CALL 315-589-4511 to discuss your specific cutting specifications.

  • Cone hopper infeed (can optionally be fitted with a pipe feed for pump-fed applications) with safety grid.

  • Food grade USDA sanitary.

  • Stainless steel construction including support frame.

  • Complete with oil mist lubrication system.

  • 30 HP 3-phase brakemotor drive.

  • Gasketed stainless steel factory electrical control box with safety interlock system (being refurbished, not shown in video).

  • Set for 460 volt 3 phase electrical input.


As of this writing, this Urschel mill is in stock at Alard, in very good operational condition, available for timely shipment.

CALL 315-589-4511
to confirm availability, and discuss your particular industrial food process particle size reduction needs.

Alard item reference #: Y4508

Weiler 1109 GRINDER, test run video, Y4173

MEAT GRINDER, FOOD GRADE WEILER 1109
INDUSTRIAL FROZEN BLOCK GRINDER,
all stainless steel...


Weiler 1109 Grinder test run VIDEO,
Alard item Y4173
from Alard Equipment Corporation.


A Provisur / Weiler Model 1109 grinder is the meat industry standard for versatility. Designed to handle a wide spectrum of applications including pet food and rendering. High-capacity with flexibility plus heavy duty construction equates to low operating costs and premium end product quality.

y4173m_crop_email.jpg

FEATURES:

  • Currently configured as a single-plate frozen block grinder.

  • Capable of processing up 72,000 pound (32,660 kg) an hour (fresh) per manufacturer literature.

  • Fluted grinding head with NEW stainless steel feed screw.

  • Came with standard grinder plate with 1 inch holes, stainless steel.

  • Model 1398.5HB high torque / low speed gearbox powered by a 100 HP drive motor for FROZEN MEAT.

  • 67 inch infeed height with 42 inch discharge height.

  • Designed for fast & easy sanitation.

  • y4173o_crop_email.jpgUSDA food grade sanitary stainless steel construction and shrouding.

  • 230/460 volt 3 phase electrical input.

  • Includes NEW 4-blade knife assembly, NEW plate retaining ring and NEW discharge shroud.


As of this writing, this frozen meat grinder is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y4173

125 gallon jacketed KETTLE, double-motion scraper-agitator, Y4285

Lee 125 gallon STEAM JACKETED KETTLE
with DOUBLE MOTION SCRAPER-AGITATOR.

y4285n_crop_email.jpg

A Lee model 125-D9MT, 125 gallon capacity, 90 psi steam-jacketed cooking kettle with scrape-surface agitation, with temperature probe port, USDA sanitary food grade stainless steel...



FEATURES:

  • 38.5 inch diameter by 34 inch deep hemisherical bottom vessel with 3 inch center bottom outlet.

  • y4285j_crop_email.jpgDouble motion mixing action, with a scrape surface agitator running outside a counter-rotating "christmas tree" mixer.

  • Stainless steel steam jacket manufacturer tagged and National Board coded for 90 psi working pressure.

  • 57 inch infeed height, 21.5 inch high discharge.

  • Stationary stainless steel bridge with 2 inch Tri-clamp inlet port.

  • Removable stainless steel top covers.

  • Temperature probe port.

  • USDA food grade sanitary stainless steel construction including 3 inch pipe legs.

  • 2HP 208 / 230 / 460 volt 3 phase agitator drive motor.


As of this writing, this cooker-mixer kettle is in stock at ALARD, in EXCELLENT condition and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food process cooking kettle needs.

ALARD item reference #: Y4285

FLUME WASHER, Meyer Hydrowash, food grade stainless steel, Y4418


MEYER FLUME SYSTEM,
with DEWATERING shaker & PUMP,
all stainless steel...


y4418o_crop_email.jpg

An open-trough flume washer and water-conveyor / transfer system for washing, rinsing, chilling, conveying and sanitizing leafy vegetables, diced, sliced, and chopped or even whole fruits & vegetables such as berries. Non-mechanical design provides gentle action while releasing sand, stone and floating debris...



SYSTEM FEATURES:

  • MEYER HYDROWASH flume conveyor.

    • y4418ze_crop_email.jpgU-shaped 18 inch wide by 15 inch deep by 40 foot overall length flume.

    • Designed for 9 inch minimum water depth.

    • 64 inch infeed height, 54 inch high discharge as currently configured.

    • Tubular stainless steel support frame with adjustable foot pads.

      y4418zg_crop_email.jpg
    • Baffle gate on water inlet.

    • 30 inch wide discharge flare.

    • Food grade sanitary stainless steel construction.



  • MEYER Vibra-Flex II Model VFII/SDC-36 DEWATERING SHAKER DISCHARGE CONVEYOR

y4418d_crop_email.jpg

    • 36 inch wide by 78 inch long vibratory conveyor bed with 6 inch high sides.

    • Sloped 12 inch long dimpled / rigidized solid infeed section.

    • y4418e_crop_email.jpgTwo (2) interchangeable SCREEN SECTIONS one after the other. Both are removable perpendicular 1/8 inch wedgewire / tri-rod screen panels, each 36 inch wide by 27 inch long with 1/16 inch sieve.

    • Quick-release clamps for fast, tool-less screen replacement.

    • 13.5 inch long dimpled / rigidized solid discharge section.

    • 56 inch infeed height, 49 inch high discharge.

    • Full length bottom collection pan with 6 inch center bottom outlet.

    • Food grade sanitary stainless steel construction.

    • Shaking action driven by two (2) 1/3 HP rotary / centrifugal vibrators.

    • 208/230/460 volt 3 phase electrical input.



  • SUMMIT MODEL CC 4x5-8 HORIZONTAL SUCTION PUMP

    • y4418_pump_crop_email.jpgCentrifugal pump with close couple design.

    • Manufacturer rated for 500 gallons per minute -- pump curve available.

    • Stainless steel impeller and painted ductile iron housing.

    • Flanged 5 inch inlet / 4 inch discharge connections.

    • 7.5 HP (1770 RPM) wash down motor.

    • Mounted on stainless steel base plate with threaded adjustable feet.

    • 208/230/460 volt 3 phase electrical input.

  • y4418_operator_control_panel_box_b_crop_email.jpgSTANDALONE CONTROL PANEL - stainless steel, with on/off and emergency stop switches for pump, and discharge shaker.


Previously used as a washer-chiller in an industrial pre-cut produce / fresh-cut salad processing operation.

As of this writing, this food grade sanitary flume system is in stock at Alard, in EXCELLENT operational, mechanical, & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to discuss your industrial food process flume conveying, washing, cooling and/or sanitizing needs.

ALARD item reference #: Y4418

TWO HEINZEN SD150 SPIN DRYERS, with hydraulic pack, Y4372, Y4425, Y4426


A PAIR of Heinzen SPIN DRYERs, CENTRIFUGAL,
quantity (2) 150 lb capacity each,
food grade stainless steel, with hydraulic power pack...


y4372_y4425e_crop_email.jpg

A matching pair of Heinzen / HMI Model SD150 food grade batch centrifuge dryers with a hydraulic power unit, for dewatering leafy and/or pre-cut produce products, such as fresh cut lettuce, shredded carrots, and other bagged salad type food products and ingredients, in and industrial food processing production operation.


FEATURES:

  • y4372_y4425_basket_d_email.jpgIncludes a total of (3) 30 inch diameter by 18 inch deep (7.36 cubic foot) removable stainless steel dryer baskets, each with 3/16 inch perforations and bottom dump discharge.

  • Manufacturer rated for 150 lb capacity per basket / batch.

  • Food grade stainless steel construction including all product contact surfaces and base plate connected via rubber vibration isolation mounts.

  • y4372_y4425a_crop_email.jpgHinged hydraulic-power-assisted stainless steel lid with basket hold-down wheel.

  • Hydraulic drive powered with a single 40HP power pack included to power both spinners. 208/230/460 volt electrical input.

  • Stainless steel operator control boxes on pedestals, 110 volt single phase (standard household current) electrical input.


As of this writing, this Heinzen batch spin drying system is in stock at ALARD, in VERY GOOD condition, available for timely shipment.

Again, as of this writing, we have this system of quantity two (2) identical, matching Heinzen salad spinners available in stock, with a hydraulic power pack previously used to power both. These are available as a bundled system and/or unbundled as separate items. CALL 315-589-4511 to confirm availability and discuss your particular pre-cut produce / fresh-cut food processing needs.

ALARD item reference #s: Y4372, Y4425, Y4426

Heinzen Gimco high-capacity SPIN DRYER, Y4037

HEINZEN / HMI / GIMCO
food grade stainless steel SPIN DRYER,
with 14.5 cubic foot basket.


VIDEO DEMO
Heinzen Gimco SPIN DRYER Y4037
from Alard Equipment Corporation.


An all stainless steel industrial centrifugal dryer, which model was the predecesor to the Heinzen SD300 model, and was designed for dewtering leafy vegetable / pre-cut produce, including for drying iceberg and romaine lettuce, spring mixes, spinach, cabbage, onions, carrots, broccoli, and other fresh-cut vegetables after washing.


FEATURES:

  • Stainless steel removable basket:

    • 30.5 inches in diameter by 35 inches deep (14.5 cubic foot) basket.

    • This stainless steel spin drying basket has 1/16 inch perforations to allow water to escape.

    • The volume of this centrifugal drying basket will allow for approximately 300 lbs maximum batch input capacity, and roughly 3700 lbs per hour dried output on lettuce (actual results will vary with product characteristics).

    • Time-saving bottom-dump basket has bomb-bay doors, which allow the product to be discharged from the bottom of the basket without tipping or tilting the basket to dump it; --thereby decreasing cycle time and maximizing output.

  • Stablilizing top lid with anti-sling product guard that fits over the basket to prevent product from escaping.

  • Food grade stainless steeel construction, with wash-down shrouding.

  • Painted steel lid lift-assist springs.

  • Stainless steel control box including dynamic braking, soft-start variable speed controls, timers and circuitry, with lid-locking safety interlock system.

  • Complete with operator controls for stop/start.

  • Electric motor driven with belt drive, under bolt-on stainless steel shroud.


As of this writing, this Heinzen high-capacity spin dryer is in stock at Alard in EXCELLENT operatinal, mechanical, electrical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your pre-cut produce processing and packaging equipment needs.

Alard item reference. #:Y4037

CARROT TIPPER-TOPPER length-cutter, Y2012


Francis Overall Machine
CARROT TOPPER-TAILER / LENGTH CUTTER...

y2012c_crop_email.jpg


A Francis Overall Carrot Baton machine for continuous trimming, tip & butt cutting, and length-cutting carrots.



OPERATION:

  • Carrots are manually inserted, top end first, into a vertically mounted carousel wheel.

  • y2012f_crop_email.jpgThe wheel jogs into the three (3) circular cutting blades which remove the top end, bottom end and also length cuts the main body of the carrot.

  • The top end trimming is discharged out the bottom, the tail end of the carrot is discharged out a front discharge chute and the cut lengths are transferred into position to be discharged out a separate front discharge opening via a power ram.


FEATURES:y2012a_crop_email.jpg

  • Designed for "topping" and cutting carrots into 3.5 inch long plugs or "batons".

  • Maximum product size of up to 9.5 to 10 inch long by 2 inch diameter.

  • Semi-automatic with manual feed.

  • All stainless steel frame / shroud construction.


As of this writing, this carrot trimmer / increment cutter is in stock at ALARD in GOOD OPERATING condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your carrot processing needs.

ALARD item reference #: Y2012

Olney small onion and SHALLOT TRIMMER, Y2010


SHALLOT TRIMMER, RADISH TRIMMER,
CONTINUOUS high volume...

y2010a_crop_email.jpg

An Olney Model 1 TRIMMER is a continuous semi-automatic topper-tailer tip and butt cutter for trimming the ends off of small onions (i.e. shallots) and/or radishes...

OPERATION:

An operator manually places the product in feed fingers which are mounted on an endless chain. These pass thrrough two circular knives that adjust themselves automatically to the different size product, permitting the same amount to be cut off each onion, shallot or radish, regardless of size with a minimum of waste. Product may be placed in the feed fingers without regard to which side either the stem or root are facing, as long as they are oriented from side-to-side.


FEATURES:

  • y2010f_email.jpgCutting blades automatically adjust to size of the product being cut within it's size range thus reducing waste but assuring close trimming of stem and roots ends regardless of various lengths of the stems.

  • Manufacturer rated for up to 80 onions or radishes per minute for 1 inch to 1.75 inch diameter product.

  • Stainless steel guides center the product to further assure efficient cutting.

  • 27 inch wide by 55 inch long by 9 inch deep product infeed hopper.

  • 35 inch long loading section.

  • Food grade sanitary stainless steel construction including frame & shrouding.

  • Stainless steel control box with start/stop controls.

  • Safety interlock system power to the machine if access door is opened.

  • 208/230/460 volt 3 phase electrical input.


As of this writing, this radish and onion trimmer is in stock at ALARD, in VERY GOOD condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular onion trimming machine needs.

ALARD item reference #: Y2010

Rietz ANGLE DISINTEGRATOR, 40HP, Y4320


RIETZ-BEPEX ANGLE DISINTEGRATOR
Model RA2-8-K122, 40HP,

food grade stainless steel hammermill, grinder...


y4320e_crop_email.jpg


An 8-inch Rietz DISINTEGRATOR, RA series angled mill, manufacturer recommended for grinding, shredding, delumping, homogenizing, fine dispersing or fine pulping of wet & dry products. For particle size reduction in food grade high-capacity industrial production environments, such as grinding, pureeing, granulating, pulverizing, and wet grinding, in fruit & vegetable processing, nutraceutical, chemical and pharmaceutical applications.

FEATURES:

  • y4320g_crop_email.jpg7.5 inch diameter top infeed with clamp cover with removable bolt-on feed hopper.

  • 8 inch rotor diameter.

  • Four (4) sets of blunt hammers.

  • Fine perforated screen with backing screen.

  • 5 inch diameter front bottom discharge at 15 inch discharge height.

  • All food grade sanitary stainless steel construction.

    y4320a_crop_email.jpg
  • 40 HP 3600 rpm belt drive motor.

  • 208/230/460 volt 3 phase electrical input.


As of this writing, this food grade stainless steel disintegrator mill is in stock at ALARD, in EXCELLENT operational mechanical, and cosmetic condition, available for immediate shipment.


CALL 315-589-4511 to confirm availbility and discuss your food process particle size reduction needs.

ALARD item reference #: Y4320

Fitzpatrick Fitzmill 6 inch industrial impact mill, Y3847

FITZPATRICK Model D Comminutor,
food grade stainless steel hammermill
for controlled particle size reduction...



y3847d_crop_email.jpg

The Fitzpatrick D6 comminuting machine is an industrial impact mill for particle size reduction in hammer milling applications, for industrial food processing and other commercial-grade production environments.



FEATURES:

  • Hopper infeed with 13 inch by 10 inch opening.

  • y3847p_crop_email.jpgConfigured with knife-edge stainless steel blades on 0.75 inch spacings. Blunt-edged or reversible edge blades are also available. CALL 315-589-4511 to discuss your particular grinding, chopping, pulverizing need.

  • Came without a screen; --interchangeable bottom screen(s) are available to buyer specification. CALL 315-589-4511 to discuss your cutting, milling, grating or other particle size reduction specifications.

  • Food grade stainless steel product contact surfaces.

  • Heavy duty painted steel support frame.

  • 59 inch infeed height, 34 inch discharge height as configured.

  • Stainless steel operator control panel with safety interlock system, and safety lockout.

  • 5 HP belt drive high-efficiency motor.


As of this writing, this Fitzpatrick Model D grinder, chopper, pulverizer mill is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, and available for timely shipment.

CALL 315-589-4511 to confirm current availability, and to discuss your particular food process milling and / or cutting machine requirements.

ALARD item reference #: Y3847


Cornell FOOD PUMPS in stock NEW, Y3765, Y3766

CORNELL FOOD PUMPS
IN STOCK NEW,
for immediate shipment...


y3765_y3766_crop_email.jpg

Alard is a dealer for and keeps continuous inventory of Cornell Hydro-Transport FOOD PUMPS, available as pump only, or intergrated with drives and feed tanks. These offset expanded volute food pumps are an excellent foundation for a pipe flume, open flume, wash flume, chill flume, disinfectant bath, or other water conveyor configuration for gently conveying high volumes of whole or cut food products in water at tons-per-hour volume capacities.

Pictured here are just two of the pumps we as of this writing, in stock new and available for immediate shipment:

  • y3765_y3766c_crop_email.jpgA Cornell Model 6NHPP-F16K hydro transport food pump, with 6 inch inlet and outlet with flanged connections.
    Alard item reference #: Y3766

  • A Cornell Model 4NMPP-F5K hydro transport food pump, with 4 inch inlet and outlet with flanged connections.
    Alard item reference #:Y3765

  • Expanded volute PP series pump for the ultimate in gentle handling of delicate food products. So gentle the manufacturer rates for pumping live fish!

  • Specifically designed and built for industrial food processing application use, with tons-per-hour throughput capacity.

  • Manufacturer recommends 2 or 3 to 1 ratio of water to product, with your product capacity determined by horsepower, RPM, and total dynamic head resistance. Pump curves are available by request; --call 315-589-4511 do discuss your specific application requirements.

  • NEW, with two-year manufacturer warranty.

y3765_y3766d_crop_email.jpgThe Cornell hydro transport food pump is frequently employed to power open stainless steel flume systems, while others, pump into a closed pipe flume, which they run in a coil pattern on the ceiling to conserve floor space. The flumes provide hold time to remove heat, and extend exposure to the water, which usually includes either a sanitizing agent, or a preservative solution such as vitamin C; depending on the product. The power of the Cornell Hydro-Transport pump allows food producers to deliver their now chilled and treated ingredients to any point in the plant where they want to dry, mix and pack the final product.

Others use the chill flume for pre-cooling blanched (very lightly cooked to kill the active enzymes) food products in water prior to running them through an IQF freeze tunnel. Others use the flume system just to convey product in water. In every case, the powerful Cornell pump can gently move high tons-per-hour output to wherever it needs to go in the plant.

Alard also stocks and custom-configures various kinds of dewatering, solids-separation, water recovery and filtration equipment to recover the food product from the pump water, and to recapture, treat and recirculate the water as necessary, as well as drying and packaging equipment to complete the process; all tailored to the end-user's specific food product(s) and application. With Cornell's large range of hydro-transport pump size and material configurations, and with Alard's ability to configure and "gear" the pump to the buyer's specific needs, Alard's Cornell Hydro-Transport food pumps are a superb tool for a wide variety of industrial food processing applications.

As of this writing, these Cornell flume pumps are IN stock NEW at Alard, and available for immediate shipment.

CALL 315-589-4511 to confirm current availability, and to discuss your particular food process bulk product conveying, chilling, cooling, sanitizing and pumping equipment needs.

Urschel Comitrol 3600 confetti cutting sauerkraurt, Y3052

Urschel Comitrol 3600 PROCESSOR MILL
making confetti cuts from sauerkraut,
DEMO VIDEO
Alard item Y3052

VIDEO DEMO
Urschel Comitrol 3600 confetti cut sauerkraut Y3052
from Alard Equipment Corporation.


URSCHEL COMITROL 3600 PROCESSOR, hopper - screw feed, 10HP. A compact screw fed Comitrol mill for low to high volume operations. Widely used for rework of gelatin capsules, biscuits, candy, noodles and a full spectrum of bakery goods. Also manufacturer recommended for reducing meats, fish, textured vegetable protein, fruits, vegetables, spices, seaweed, cheeses, chemical and pharmaceutical applications.

FEATURES:

  • 19 inch by 19 inch by 13 inch deep tapered infeed hopper with side mounted FMC Syntron feed-hopper vibrator to prevent bridging.

  • Powered screw feeder with 1/6 HP 3 phase drive motor.

  • Existing 2 inch cutting head included, manufacturer offers a wide range of cutting heads and impellers for particle sizes ranging from coarse to fine emulsions /powders / granules. CALL 315-589-4511 to discuss your cutting specification.

  • Continuous operation for uninterrupted production.

  • Designed for easy cleanup and operation.

  • Food grade, all stainless steel product contact surfaces and support frame.

  • 10 HP 208/230/460 volt 3 phase motor for cutting head, with safety interlock system integrated with guards and shrouds.

As of this writing, this Urschel Comitrol 3600 milling machine is in stock at Alard, in EXCELLENT operational, mechanical and cosmetic condition, ready to go, and available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food processing milling and cutting equipment needs.

Alard item reference #:Y3052

300 gallon MIXER TANK, stainless steel, dome top, Y4283

300 gallon VERTICAL TANK
with sweep agitator-mixer,
single wall, food grade stainless steel...



y4283a_crop_email.jpg


A DCI 300 gallon single wall food grade stainless steel vertical mixing tank with dome top and shallow cone bottom, with sweep agitation mixer for liquid sugars, juices, water, oils and/or other free-flowing liquids, liquid products...



FEATURING:

  • 48 inch diameter by 36 inch straight sided vessel with shallow cone bottom.

  • 2-inch diameter center bottom outlet with Tri-clamp connection.

  • Dome top with one (1) 3 inch and two (2) 2 inch Tri-clamp inlets.

  • 19 inch diameter top manway.

  • y4283h_crop_email.jpgDual blade bottom-sweep agitator, with stationary baffle.

  • Stainless steel legs.

  • 208 / 230 volt 3 phase drive motor.

As of this writing, this food grade stainless steel 300 gallon mixing tank is in stock at ALARD, in very good condition, available for timely shipment.


CALL 315-589-4511 to confirm availability and discuss your food processing needs CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y4283

INCLINE SCREW FEEDER, 7x10 food grade stainless steel Y3784

ELEVATING SCREW CONVEYOR, 7x10,
jacketed, stainless steel...

y3784j_crop_email.jpg


A food grade stainless steel, portable, incline feed auger conveyor for industrial food process food product handling.


FEATURING:

  • 10 diameter by 86 inch long screw-auger with 1.5 inch wide by 3/16 inch thick ribbon, with flights on 9 inch centers around a 2 3/8 inch shaft.
  • The screw-trough is jacketed for low psi (i.e. water or glycol) heating or cooling.

  • Removable stainless steel flat covers.

  • y3784c_crop_email.jpg45.5 inch high infeed, 51 inch discharge height as configured, on 5-inch locking casters for added mobility.

  • Food grade sanitary stainless steel construction including frame.

  • 2HP 230/460 volt 3 phase chain drive motor.


As of this writing, this screw conveyor is in stock at ALARD, in GOOD OPERATING condition, available for timely shipment.


CALL 315-589-4511 to confirm availability and discuss your product handling needs.

ALARD item reference #: Y3784

SPIN DRYER, Brothers LeGrow, stainless steel, Y3991

BROTHERS LEGROW
CENTRIFUGAL VEGETABLE SPIN DRYER,
140 lb capacity...


y3991c_crop_email.jpg


A food grade batch centrifuge drying system for leafy and/or pre-cut produce products, such as fresh-cut lettuce, onions, shredded carrots, and other similar fresh bagged type products...



FEATURING:

  • Removable 24 inch diameter by 22 inch deep (6.28 cubic feet) basket with 1/4 inch perforations.

  • y3991e_crop_email.jpgThis is a modified basket which is not standard for the model, so if you have other same-make/model machines the baskets will not be interchangeable.

  • Manufacturer rated for 140 lb maximum capacity.

  • All food grade stainless steel construction including mounting base with rubber vibration isolation mounts.

  • y3991g_crop_email.jpg5 HP belt drive motor with guard.

  • Hinged lid with elastic lift assistance straps.

  • 2 inch diameter bottom side drain.

  • Operator ON/OFF controls with safety interlock switch on lid (cuts power to machine if lid is opened).

  • 230/460 volt 3 phase electrical input.


As of this writing, this Brothers Spin Dryer is in stock at ALARD, in good condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your food processing needs.

ALARD item reference #: Y3991

Cold-press JUICER, plate & bag JUICE EXTRACTOR, Y4051

PLATE and BAG JUICE PRESS,
hydraulic, stainless steel,
pilot plant / lab-size...

y4051j_crop_email.jpg


A Pressed Right Model PR-25-NS COLD PRESS JUICER for cold pressing fruit and vegetable juices such as apple, grape, citrus, leafy greens, almonds & other nuts, beets, celery, herbs plus a multitude of other fruits & vegetables. Practically idenntical to the Goodnature model X-1 juicer, this is an entry-level / lab size industrial press for small-batch producers and/or for pilot plants or R & D use in testing and scaling up to higher volumes.



FEATURES...

  • Manufacturer rated for up to 30 gallons per hour.

  • y4051i_crop_email.jpgSingle bag with dual-press plates.

  • Press plates measure 19.5 inch by 19.5 inch each.

  • All hygienic stainless steel construction.

  • Conforms to NSF/ANSI 8 food protection and sanitation requirements.

  • Includes a self-contained / onboard hydraulic system with 3 gallon reservoir.

  • 1 HP stainless steel washdown drive motor.

  • Operator controls with ON/OFF box.

  • 230/460 volt 3 phase electrical input; --NOTE: single phase electrical input setup is available; --call 315-589-4511 to discuss your juice press needs.


As of this writing, this hydraulic juice press is in stock at ALARD, in VERY good operational, mechanical and hydraulic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y4051

Tomato SLICER, onion ring slicing machine, Y2149

GRIFFIN VEGETABLE SLICER /
ONION RING SLICER / TOMATO SLICER / PEPPER SLICER,
with takeaway conveyor...

y2149c_crop_email.jpg


The Griffin Model #55 Vegetable Slicer is an industrial-capacity commercial-grade slicing machine designed with unique slicing action, which reduces plant cell damage. Straight or angled tube-fed slicing for straight 90 degree perpendicular cuts, or 45 degree crosscut bias slices, to produce superior finished product. Manufacturer recommended for a variety of fruit and vegetable products including onion rings, tomatoes, peppers, oranges, apples, pineapples, eggplant and grapefruit PLUS the bias feature can cut carrots, zucchini, squash, bok choy and celery...


FEATURING:

  • Manufacturer rated for over 500 slices per minute.

  • Three (3) 5-inch diameter vertical top in-feed tubes and one (1) 2.25 inch 45-degree angled side feed-tube . y2149f_crop_email.jpgTube diameters can be reduced with inserts.

  • The tubes feed product to a rotating cutting deck with (2) horizontal powered 14 inch diameter circular slicing blades.

  • Slice thickness is currently configured for 1/8 inch, but can be configured for up to 3/4 inch with change parts. Call 315-589-4511 to discuss your specific cutting specifications.

  • This cutting machine is positioned over a 34 inch wide by 8 foot long product discharge / take-away conveyor, with solid interlocking plastic chain type belt. y2149d_crop_email.jpg

  • All food grade sanitary stainless steel construction.

  • Complete with crank and pulley variable speed cutting head drive.

  • Electronic variable speed controller for conveyor belt speed.

  • On / off control box with safety interlock system.

  • 230/460 volt 3 phase electrical input.


As of this writing, this Griffin slicing machine is in stock at ALARD, in VERY good condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food slicing needs.

ALARD item reference #: Y2149

Urschel Diversacut 2110 cutting acorn squash Y4300

URSCHEL DIVERSACUT 2110 DICER,
VIDEO DEMO
cutting squash...


DEMO VIDEO
Urschel Diversacut 2110 cutting acorn squash
from Alard Equipment Corporation.


An Urschel Model 2100 DC dicer is the largest machine in the Diversacut line, specifically designed to accept large infeed products up to 10 inches long, providing similarly long cuts such as for vegetable noodles. A versatile, tons-per-hour industrial food process cutting machine / dicer / slicer / julienne cutter, which uniformly cuts flat or crinkle cut dices, cubes, strips / strip cuts, french fry cuts, vegetable noodle cuts, and slices from a wide variety of food products at high production capacities with speeds dependent on materials, application and machine configuration. This dicer is designed with precise cut tolerances with slice adjustment / lock-down features which allow fine-tuning and ultimate precision...



MANUFACTURER SPECIFICATIONS:

  • Slice shell: 1/16 inch to 1 inch (1.6 to 25.4 mm) -- knob adjustable.

  • Circular knife: 1/8 to 3 inch (3.2 to 76.2 mm) -- spindle with knives & spacers.

  • Crosscut knife -- change part:

    • Flat cut: 3/32 to 1.5 inch (2.4 to 38.1 mm)

    • Crinkle Cut: 9/32 to .583 inch (7.1 to 1438 mm) with .076 inch depth.

    • "Deep Crinkle Cut": 3/8 to 1/2 inch (9.5 to 12.7 mm) with either .125 or .145 depth.

    • V-cuts: 5/16 to 1/2 inch (7.9 to 12.7 mm).

  • Flat or krinkle-cut cutting parts can be used in various combinations for cubes, strip cuts, rectangular cuts, julienne cuts, slices, flat or krinkle-cut french fry strips,. Works as a one-dimensional, two-dimensional or three-dimensional cutter. CALL 315-589-4511 to discuss YOUR particular food process cutting machine requirements.

  • Manufacturer rated for input size up to 10 inches (254mm) in any dimension which reduces need to pre-cut product; --but existing impeller has (8) paddles on 5.5 inch centers, so practical product input dimensions would be 10 inches long by 5 inches in diameter. CALL 315-589-4511 to discuss your particular food process cutting machine requirements.

  • This cutter is manufacturer rated for a wide range of fruit, vegetable, and meat cutting applications, including flat or crinkle cut french fries, ham, fish, breads, cookie/candy granulations, strawberries, carrots, tomatoes, green peppers, ginger, kale, zucchini, sweet potatoes, carrots, plus many more!


FEATURES:

  • Came set for 3/8 inch flat slice dices (would require significant change parts for crinkle cuts); -- other cutting parts available from the manufacturer. CALL 315-589-4511 to discuss YOUR food process cutting machine specifications.

  • Standard 10 HP stainless steel shrouded drive motor.

  • Factory stainless steel operator control panel with safety interlock system.

  • All sanitary food grade construction including frame, guards, shrouds, infeed hopper and discharge chute.

  • 230 volt 3 phase electrical input.

As of this writing, this Urschel Diversacut 2110 dicer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food process cutting machine requirements.

ALARD item reference #: Y4300


FOOD METAL DETECTOR with VIBRATING CONVEYOR, 24x3 opening, Y4286

VIDEO DEMO
FORTRESS FOOD GRADE METAL DETECTOR

with VIBRATING CONVEYOR,
24x3, stainless steel...

DEMO VIDEO
FOOD METAL DETECTOR with VIBRATING CONVEYOR,
24x3 opening, stainless steel, Y4286
from Alard Equipment Corporation.


A Fortress Stealth metal detection system with Smalley Manufacturing vibrating bed transfer conveyor, for food processing and packaging and/or other applications where detection of metal contamination is necessary...

FEATURES:

  • 24 inch by 3 inch high USABLE aperture opening.

  • Stainless steel search head enclosure.

  • Complete with integral, digital touch pad controls.

  • Vibratory metal detector through-conveyor measuring 20 inch wide by 104 inch long shaker table with 2.5 inch high sides; --anti-static plastic body section through metal detection search head.

  • Dual feed hoppers for gentle product deceleration and feed:
    • Upper hopper measures 48 inch by 40 inch with 10 inch diameter discharge.
    • Lower hopper measures 36 inch by 50 inch with 16.5 inch wide gate and level control sensor.
    • 76 inch infeed height to upper hopper, as configured.

  • Pneumatic triggered trap-door pull-back drop-through reject.

  • Eccentric drive powered by 1HP motor.

  • All food grade sanitary stainless steel construction.

  • 208/230 volt 3 phase electrical input.


As of this writing, this food process metal detection system has just been received into stock at ALARD, and has been test run and is in VERY GOOD operational condition.

CALL 315-589-4511 to confirm current availability and discuss your specific metal detection needs!

ALARD item reference #: Y4286


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)