food processing machinery since 1952, with over six warehouses of used
food processing machinery & equipment IN STOCK!
NY 14589 U.S.A. 315-589-4511(voice)
inch FOOD PUMP
with FEED TANK and DRIVE...
on picture(s) to enlarge!
on picture(s) to enlarge!
...a Cornell Model 4NMPP-F5K
hydro transport food pump coupled with a stainless steel vortex product
in-feed tank, and a 5 HP motor, with 4 inch inlet and outlet
connections. This "flume kit" configuration for conveying food solids
in water, is an excellent foundation
for a food grade pipe flume, open flume, wash flume, chill flume,
bath, or other water conveyor configuration for gently conveying high
volumes of whole or cut food products in water at tons-per-hour volume
Manufacturer rated for:
Approximately 100 to 800 gallons per minute
depending on RPM and head resistance (pump curves available on request,
call 315-589-4511), with whole or cut food product / solids handling
ability for up to 2.94 inches (74.7mm) in diameter by 4 inches
Designed and manufactured for the sole purpose
of pumping food products in water. Ideal for agricultural applications such as
fruit washing and packing as well as food manufacturing operations such
as whole or cut food product conveying, cooling and / or sanitization
in water applications.
"PP" model indicates that this is Cornell's
patented "expanded volute" model which provides the gentlest product
handling in their line e.g. for delicate food products.
This offset expanded volute pump is manufacturer
recommended as capable of gently conveying-in-water whole or cut food
products including potatoes, french fries, potato chips, live fish,
cranberries, carrots, apples, cherries, peas, broccoli, crayfish,
shrimp, lettuce, green beans, nuts, peppers, olives, cucumbers,
raisins, beans, corn, peaches, beets, oranges, and more (larger
products may require a larger pump;--see size specification of this
specific pump above). Please note we stock several sizes of Cornell
food pump; call 315-589-4511
to discuss your food product water transport need in detail.
Single port 304 stainless steel pump impeller for
handling whole or processed foods.
Epoxy painted ductile iron food process pump
volute. Stainless steel body pump also available; --call 315-589-4511 do discuss your
The Cornell food pump has 4 inch flanged suction
inlet and discharge outlet connections appropriate for a 4 inch water
The stainless steel product feed tank is 42
inches long by 32 inches wide by 21 inches deep; with a 2 inch bottom
sanitation drain, with valve, for cleaning.
35 inch tank infeed height.
Bolted flange connection between vortex tank and
Food pump, tank, and drive mounted together on a
common tubular stainless steel frame.
All food grade pump, tank and frame.
5 horsepower belt and pulley drive, 208/230/460
volt 3 phase electrical input.
This hydro transfer food pump is NEW with a
two-year manufacturer warranty.
The Cornell hydro
transport food pump is frequently
employed to power open stainless steel flume systems, while others pump
into a closed pipe flume which they run in a coil pattern on the
ceiling to conserve floor space. The flumes provide hold time to remove
heat, and extend exposure to the water, which usually includes either a
sanitizing agent, or a preservative solution such as vitamin C;
depending on the product. The power of the Cornell Hydro-Transport pump
allows food producers to deliver their now chilled and treated
ingredients to any point in the plant where they want to dry, mix and
pack the final product.
Others use the chill flume for pre-cooling blanched food products in
water prior to
running them through an IQF freeze tunnel. Others use the flume system
just to convey product in water. In every case, the powerful Cornell
pump can gently move high tons-per-hour output to wherever it needs to
go in the plant.
Alard also stocks and custom-configures various kinds of dewatering,
solids-separation, water recovery and filtration equipment to recover
the food product from the pump water, and to recapture, treat and
recirculate the water as necessary, as well as drying and packaging
equipment to complete the process; all tailored to the end-user's
specific food product(s) and application. CALL 315-589-4511 to discuss
your food process water and solids separation needs.
With Cornell's large range of hydro-transport pump size and material
configurations, and with Alard's ability to configure and "gear" the
pump to the buyer's specific needs, Alard's Cornell Hydro-Transport
based food pump flume kits are a superb tool for a wide variety of
industrial food processing applications.
of this writing, this hydro-flow food pump is new in stock at Alard;
--new, fully assembled and available for immediate shipment.
CALL 315-589-4511 to
confirm current availability, and to discuss your particular food
process bulk product conveying, chilling, cooling, sanitizing and
pumping equipment needs.
item reference #: Y3765
Unless otherwise stated, volume, speed,
and/or capacity estimates given are those of the manufacturer(s) of the
equipment. All offers are subject to prior sales and owner's
confirmations. Unless otherwise specified, any prices shown do not
include skidding, crating, or freight.