food processing machinery since 1952, with over six warehouses of used
food processing machinery & equipment IN STOCK!
NY 14589 U.S.A. 315-589-4511(voice)
TRANSPORT FOOD PUMP
with Stainless Steel FEED TANK
on picture(s) to enlarge!
on picture(s) to enlarge!
food grade pump-in-water conveyor / flume kit including Cornell 6-inch
food pump, feed tank, and drive on common stainless steel frame. Pump
whole or cut food products via pipe flume or open sluice, to cool,
wash, rinse, sanitize, and/or apply preservative solutions while
conveying horizontally and/or vertically for long or short distances.
Ideal for food processing applications such as fruit and vegetable
washing, fresh-cut / pre-cut produce hydro-cooling and chilling
applications, and/or pre-heating prior to cutting, peeling, etc;
including shredded lettuce and cabbage, cut romaine, whole or cut
potatoes, French fries, potato chips, live fish (!), cranberries,
carrots, apples, cherries, peas, broccoli, crayfish, shrimp, lettuce,
green beans, nuts, peppers, olives, cucumbers, raisins, beans, corn,
peaches, beets, oranges, and more.
6NHPP-F16K cast-iron hydro flow food pump
with stainless steel impeller, six-inch inlet and outlet. Stainless
steel body pump also available; --call
315-589-4511 to discuss your specific requirements.
Manufacturer rated for solids handling ability
for product up to 4 inch diameter by 6 inches in length. Larger
diameter pumps are available for larger product sizes; --call 315-589-4511 to discuss your
specific application requirements.
Expanded volute PP series pump for the ultimate
in gentle handling of delicate food
products. So gentle the
manufacturer rates for pumping live fish!
Specifically designed and built for industrial
food processing application use, with tons-per-hour
Manufacturer recommends 2 or 3 to 1 ratio of
water to product, with your product capacity determined by horsepower,
RPM, and total dynamic head resistance. Pump curves are available by
request; --call 315-589-4511 to discuss your specific application
Stainless steel in-feed tank 41 inches long by 33
inches wide by 19 inches deep; with a 35 inch product infeed height,
and a 18.5 inch height to center of return flange.
The tank has a 2 inch inner diameter NPT threaded
(female) cleanout drain near the return flange end, at a 14.5 inch
The pump, tank and drive, are mounted together on
a tubular stainless steel frame.
7.5 HP 1,765 RPM 208/230/460 volt 3 phase drive.
Other RPM and/or horsepower drives, optional variable speed controls,
and / or drive-ratio setups are available: Call 315-589-4511 to tell us
what YOU need to pump food products
NEW, with two-year manufacturer warranty.
of this writing this Cornell food pump with tank and motor is in stock
new at Alard, fully assembled and ready to go, available for immediate
CALL 315-589-4511 to confirm
availability, and to discuss your particular hydro food pump
item reference #: Y4183
Unless otherwise stated, volume, speed,
and/or capacity estimates given are those of the manufacturer(s) of the
equipment. All offers are subject to prior sales and owner's
confirmations. Unless otherwise specified, any prices shown do not
include skidding, crating, or freight.