food processing machinery since 1952, with over six warehouses of used
food processing machinery & equipment IN STOCK!
NY 14589 U.S.A.
TRANSPORT FOOD PUMP
STAINLESS STEEL FEED TANK
on picture(s) to enlarge!
on picture(s) to enlarge!
grade pump-in-water conveyor / flume kit including Cornell 8-inch food
pump, integrated with a CMI feed tank, and motor-drive. Pump whole or
cut food products via pipe flume or open sluice, to cool,
wash, rinse, sanitize, and/or apply preservative solutions
while conveying horizontally and/or vertically for long or short
distances. Ideal for food processing applications such as fruit
vegetable washing, fresh-cut / pre-cut produce hydro-cooling and
chilling applications, and/or pre-heating prior to cutting, peeling,
etc; including shredded lettuce and cabbage, cut romaine, whole or cut
potatoes, French fries, potato chips, live fish (!), cranberries,
carrots, apples, cherries, peas, broccoli, crayfish, shrimp, lettuce,
green beans, nuts, peppers, olives, cucumbers, raisins, beans, corn,
peaches, beets, oranges, and more.
The Cornell hydro transport food pump is frequently
employed to power open water flume systems, while others, pump into a
closed pipe flume, which they run in a coil pattern on the ceiling to
conserve floor space. The flumes provide hold time to remove heat, and
extend exposure to the water, which usually includes either a
sanitizing agent, or a preservative solution such as vitamin C;
depending on the product. The power of the Cornell Hydro-Transport pump
allows food producers to deliver their now chilled and treated
ingredients to any point in the plant where they want to dry, mix and
pack the final product.
8NHPP-F18K cast-iron hydro flow food pump,
with eight-inch flange inlet and outlet. Stainless steel body pump also
available; --call 315-589-4511 do discuss your specific
- Manufacturer rated for solids handling ability
for product sized up to 5 inch
diameter by 9 inches in length. Larger
diameter pumps are available for larger product sizes; --call
315-589-4511 do discuss your specific application requirements.
- Expanded volute PP series pump for the ultimate
in gentle handling of delicate food
products. So gentle the
manufacturer rates for pumping live fish!
- Specifically designed and built for food grade industrial-process
applications use, with tons-per-hour
- Manufacturer recommends 2 or 3 to 1 ratio of
water to product, with your product capacity determined by horsepower,
RPM, and total dynamic head resistance. Pump curves are available by
request; --call 315-589-4511 do discuss your specific application
- CMI stainless steel in-feed tank 48 inches long
by 29.5 inches wide by 28 inches deep with a tapered bottom.
- The tank has a 2.5 inch inner diameter NPT
threaded end cleanout drain near the discharge flange end, with a
- The pump, tank and drive, are integrated, with
pump and motor drive on a heavy 4 inch square tubular stainless steel
- 7.5 HP
208/230/460 volt 3 phase belt and pulley drive.
- Previously used as a cooling flume feed pump and
configured as we received it; but if you have need for a different
configuration, we are dealers for Cornell, and can offer NEW equipment
configured to your exact specification; --CALL 315-589-4511 to discuss
your precise requirement.
Others use the chill flume for pre-cooling
blanched (very lightly cooked to kill the active enzymes) food products
in water prior to running them through an IQF freeze tunnel. Others use
the cooling flume system just to convey product in water. In every
case, the powerful Cornell pump can gently move high tons-per-hour
output to wherever it needs to go in the plant.
Alard also stocks and
handles various kinds of dewatering, solids-separation, water recovery
and filtration equipment to recover the food product from the pump
water, and to recapture, treat and recirculate the water as necessary,
as well as drying and packaging equipment to complete the process; all
tailored to the end-user's specific food product(s) and
application.With Cornell's large range of hydro-transport pump size and
material configurations, and with Alard's ability to configure and
"gear" the pump to the buyer's specific needs, Alard's Cornell
Hydro-Transport based flume kits are a superb tool for a wide variety
of industrial food processing applications.
As of this writing, this Cornell food pump flume kit in in stock at
Alard, in EXCELLENT operational, mechanical, and cosmetic condition,
available for immediate shipment.
CALL 315-589-4511 to confirm
availability, and to discuss your particular hydro food pump
item reference #: Y4324
Unless otherwise stated, volume, speed,
and/or capacity estimates given are those of the manufacturer(s) of the
equipment. All offers are subject to prior sales and owner's
confirmations. Unless otherwise specified, any prices shown do not
include skidding, crating, or freight.