food processing machinery since 1952, with over six warehouses of used
food processing machinery & equipment IN STOCK!
NY 14589 U.S.A.
TRANSPORT FOOD PUMP
with STAINLESS STEEL VORTEX TANK
on picture(s) to enlarge!
on picture(s) to enlarge!
grade pump-in-water conveyor / flume
kit including Cornell 8-inch
pump, integrated with a CMI
feed tank, and motor-drive. Pump whole or
cut food products via pipe flume or open sluice, to cool, wash, rinse,
sanitize, and/or apply preservative solutions while conveying
horizontally and/or vertically for long or short distances. Ideal for
food processing applications such as fruit and vegetable washing,
fresh-cut / pre-cut produce hydro-cooling and chilling applications,
and/or pre-heating prior to cutting, peeling, etc; including shredded
lettuce and cabbage, cut romaine, whole or cut potatoes, French fries,
potato chips, live fish (!), cranberries, carrots, apples, cherries,
peas, broccoli, crayfish, shrimp, lettuce, green beans, nuts, peppers,
cucumbers, raisins, beans, corn, peaches, beets, oranges, and more.
Cornell hydro transport food pump is frequently employed to power open
water flume systems, while others, pump into a closed pipe flume, which
they run in a coil pattern on the ceiling to conserve floor space. The
flumes provide hold time to remove heat, and extend exposure to the
water, which usually includes either a sanitizing agent, or a
preservative solution such as vitamin C; depending on the product.
8NHPP-F18K cast-iron hydro flow food pump
with stainless steel impeller, eight-inch inlet and outlet. Stainless
steel body pump also available; --call 315-589-4511 do discuss your
- Manufacturer rated for gentle solids handling
for product sized up to 5 inch
diameter by 9 inches in length. Larger
diameter pumps are available for larger product sizes; --call
315-589-4511 do discuss your specific application requirements.
- Expanded volute PP series pump for the ultimate
in gentle handling of delicate food
products. So gentle the
manufacturer rates for pumping live fish!
- Specifically designed and built for industrial food processing
applications, with tons-per-hour throughput capacity.
- Manufacturer recommends 2 or 3 to 1 ratio of
water to product, with your product capacity determined by horsepower,
RPM, and total dynamic head resistance. Pump curves are available by
request; --call 315-589-4511 do discuss your specific application
- CMI stainless
steel in-feed tank 48 inches long by 29.5 inches wide by 28
inches deep with a tapered bottom.
- The tank has a 2.5 inch inner diameter NPT
threaded end cleanout drain near the discharge flange end, with a
- The pump, tank and drive, are integrated, with
pump and motor drive on a heavy 4 inch square tubular stainless
- 7.5 HP
208/230/460 volt 3 phase belt and pulley drive.
- Previously used as a cooling flume feed pump and
configured as we received it; but if you have need for a different
configuration, we are dealers for Cornell, and can offer NEW equipment
configured to your exact specification; --CALL 315-589-4511 to discuss
your precise requirement.
power of the Cornell Hydro-Transport pump allows food producers to
deliver their now chilled and treated ingredients to any point in the
plant where they want to dry, mix and pack the final product.
the chill flume for pre-cooling
blanched (very lightly cooked to kill
the active enzymes) food products in water prior to running them
through an IQF freeze tunnel. Many users employ the flume system just to simply convey product in water.
In every case, the powerful Cornell pump
can gently move high tons-per-hour
output to wherever it needs to go in
Alard also stocks and handles various kinds of dewatering,
solids-separation, water recovery and filtration equipment to recover
the food product from the pump water, and to recapture, treat and
recirculate the water as necessary, as well as drying and packaging
equipment to complete the process; all tailored to the end-user's
specific food product(s) and application.
With Cornell's large range of
hydro-transport pump size and material configurations, and with Alard's
ability to configure and "gear" the pump to the buyer's specific needs,
Alard's Cornell Hydro-Transport based flume kits are a superb tool for
a wide variety of industrial food processing applications.
As of this writing, this Cornell food pump flume kit in in stock at
Alard, in EXCELLENT operational, mechanical, and cosmetic condition,
available for immediate shipment.
CALL 315-589-4511 to confirm
availability, and to discuss your particular hydro food pump
item reference #: Y4325
Unless otherwise stated, volume, speed,
and/or capacity estimates given are those of the manufacturer(s) of the
equipment. All offers are subject to prior sales and owner's
confirmations. Unless otherwise specified, any prices shown do not
include skidding, crating, or freight.