Supplying used food processing machinery since 1952, with over six warehouses of used food processing machinery & equipment IN STOCK!

ALARD EQUIPMENT CORPORATION
6483 Lake Avenue
Williamson, NY 14589 U.S.A.
315-589-4511(voice) 315-589-3871(fax)

IMMERSION WASHER for produce,
with AIR INJECTION for TURBULENT wash,
food grade, stainless steel...

Click on picture(s) to enlarge!

A versatile turbulent washer for almost any pre-cut / fruit or fresh-cut vegetable product with multiple spray bars to motivate product in a downstream direction and air injection for increased removal of bugs, dirt, and other detritus, using ambient or chilled water. This helical washer, with forced air bubbles, is like a gentle Jaccuzi bath for your whole, sliced, diced, fruits and vegetables, and / or leafy vegetables.

FEATURES:

13 foot long by 29 inch wide by 12 inch deep turbulent wash tank, with water jets:

Seven (7) forward facing spray nozzles with manual control valve.
Six (6) adjustable spray jets with manual control valve.
Perforated bottom plates with 3/16 inch perforations to trap sand and fine gravel -- removable for ease of clean-out / sanitation.
32 inch high infeed
Water recirculation pump powered by 4 HP motor.

AIR AGITATION / INJECTION for increased scrubbing action:

Sixteen (16) rows of headers percolate air up through the perforated bottom plates.
Manual control valves.
Air Blower driven by a 7 HP motor.

Two (2) 6 inch diameter by 24 inch wide powered poly brushes to increase release of surface debris, insects and other foreign material.

Spray bar with five (5) fixed spray nozzles and manual control valve.
1/3 HP chain drive motor.

Equipped with "bug reel" for scavenging insects and other floating debris from recirculating wash water:

24 inch diameter by 28 inch wide drum with 1/4 inch perforations.
1/3 HP drive motor
Reel is hinged for cleaning & sanitation.
Collected debris is deposited onto a side overflow tank with removable perforated screens.

Inline bag filter for removal of fines from water stream.
Elevating product discharge conveyor with stainless steel wire woven belting:

1.5 inch high flights on 10 inch centers.
Four (4) water spray bar headers with a total of fourteen (14) adjustable jets and manual control valve.
1 HP drive motor for conveyor.
48 inch discharge height.

Stainless steel operator control panel.
All food grade sanitary stainless steel construction.
460 volt 3 phase electrical input.

As of this writing, this air injected immersion jet washer is in stock at ALARD, in VERY GOOD condition and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food washing needs.

Alard item reference #: Y4500

Unless otherwise stated, volume, speed, and/or capacity estimates given are those of the manufacturer(s) of the equipment. All offers are subject to prior sales and owner's confirmations. Unless otherwise specified, any prices shown do not include skidding, crating, or freight.

Search our website

search tips

advanced search

See our
General EQUIPMENT LISTINGS

See our
PRE-CUT PRODUCE
EQUIPMENT LISTINGS

RECENT ACQUISITIONS

Watch
ALARD.TV

We won't share your Email address or other information with anyone, and we won't abuse your trust by sending constant nagging messages.Our Email updates are no-more-than-monthly.

HOME

EMAIL
US

IMMERSION WASHER for produce, with AIR INJECTION for TURBULENT wash, food grade, stainless steel...

IMMERSION WASHER for produce,
with AIR INJECTION for TURBULENT wash,
food grade, stainless steel...