food processing machinery since 1952, with over six warehouses of used
food processing machinery & equipment IN STOCK!
NY 14589 U.S.A.
6 INCH HYDRO
TRANSPORT FOOD PUMP
with STAINLESS STEEL FEED TANK
and MOTOR DRIVE...
on picture(s) to enlarge!
on picture(s) to enlarge!
grade pump-in-water conveyor / flume
kit including a NEW Cornell
food pump, integrated with a pre-owned / like-new Commercial vortex feed tank,
with new motor-drive. Pump whole or cut food products via pipe flume or
open sluice, to cool, wash, rinse, sanitize, and/or apply preservative
solutions while conveying horizontally and/or vertically for long or
short distances. Ideal for food processing applications such as fruit
and vegetable washing, fresh-cut / pre-cut produce hydro-cooling and
chilling applications, and/or pre-heating prior to cutting, peeling,
etc; including shredded lettuce and cabbage, cut romaine, whole or cut
potatoes, French fries, potato chips, live fish (!), cranberries,
carrots, apples, cherries, peas, broccoli, crayfish, shrimp, lettuce,
green beans, nuts, peppers, olives, cucumbers, raisins, beans, corn,
peaches, beets, oranges, and more.
Cornell hydro transport food pump
is frequently employed to power open
water flume systems, while others pump into a closed pipe flume, which
they run in a coil pattern on the ceiling to conserve floor space. The
flumes provide hold time to remove heat, and extend exposure to the
water, which usually includes either a sanitizing agent or a
preservative solution such as Vitamin C. The power of the Cornell
Hydro-Transport pump allows food producers to deliver their now chilled
and treated ingredients to any point in the plant where they want to
dry, mix or pack the final product. Others use the chill flume for
pre-cooling blanched (very lightly cooked to kill active enzymes) food
products in water prior to running them through an IQF freezer tunnel.
Others use the cooling flume system just to convey product in water. In
every case, the powerful Cornell Food Pump can gently move high
tons-per-hour output to wherever it needs to go in the plant.
- A new
Cornell 6NHPP-F16K cast-iron hydro
flow food pump with stainless steel impeller, six-inch inlet and
outlet. Stainless steel body pumps are also available in stock (as of
- Manufacturer rated for solids handling ability for products up to 4 inch diameter
by 6 inches in length. Larger
diameter pumps are available for larger product sizes -- CALL
315-589-4511 do discuss your specific application requirements.
- Expanded volute PP series pump for the ultimate
in gentle handling of delicate food
products -- so gentle the
manufacturer rates for pumping live fish!
- Specifically designed and built for industrial food processing application
use with tons-per-hour product throughput capacity.
- Manufacturer recommends 2 or 3 to 1 ratio of
water to product, with your product capacity determined by horsepower,
RPM and total dynamic head resistance. Pump curves available by request.
- NEW with
two (2) year manufacturer warranty.
- Pre-owned / like-new Commercial Mfg. stainless
steel feed tank 42 inch long by 30 inch wide by 20 inch deep stainless
steel tapered bottom.
- Tank has a 2 inch threaded bottom drain and
flexible coupling to the pump.
- New 5 HP
belt drive with pulley-type variable
- 208/230/460 volt 3 phase electrical input.
ALARD also stocks and handles various kinds of dewatering,
solids-separation, water recovery and filtration equipment to recover
the food product from the pump water, and to recapture, treat and/or
recirculate the water as necessary, as well as drying and packaging
equipment to complete the process; all tailored to the end-user's
specific food product(s) and application.
With Cornell's large range of hydro-transport pump size and material
configurations, and with ALARD's ability to configure and "gear" the
pump to the buyer's specific needs, ALARD's Cornell Hydro-Transport
based flume kits are a superb tool for a wide variety of industrial
food processing applications.
As of this writing, this hydro food
transfer pump is in stock at ALARD, in EXCELLENT operational,
mechanical, electrical & cosmetic condition, available for
CALL 315-589-4511 to
confirm availability and discuss your particular food process bulk
product conveying, chilling, cooling, sanitizing and/or pumping
item reference #: Y4759
Unless otherwise stated, volume, speed,
and/or capacity estimates given are those of the manufacturer(s) of the
equipment. All offers are subject to prior sales and owner's
confirmations. Unless otherwise specified, any prices shown do not
include skidding, crating, or freight.