food processing machinery since 1952, with over six warehouses of used
food processing machinery & equipment IN STOCK!
NY 14589 U.S.A.
inch FOOD PUMP,
Expanded Volute (for delicate products)
on picture(s) to enlarge!
Cornell 8-inch food pump is a
food grade pump-in-water conveyor pump
for pumping whole or cut food products via pipe flume or open sluice,
to cool, wash, rinse, sanitize, and/or apply preservative solutions
while conveying horizontally and/or vertically for long or short
distances. Ideal for food processing applications such as fruit and
vegetable washing, fresh-cut / pre-cut produce hydro-cooling and
chilling applications, and/or pre-heating prior to cutting, peeling,
etc; including shredded lettuce and cabbage, cut romaine, whole or cut
potatoes, french fries, potato chips, live fish (!), cranberries,
carrots, apples, cherries, peas, broccoli, crayfish, shrimp, lettuce,
green beans, nuts, peppers, olives, cucumbers, raisins, beans, corn,
peaches, beets, oranges, and more.
Cornell hydro transport food pump
is frequently employed to power open
water flume systems, while others, pump into a closed pipe flume, which
they run in a coil pattern on the ceiling to conserve floor space. The
flumes provide hold time to remove heat, and extend exposure to the
water, which usually includes either a sanitizing agent, or a
preservative solution such as vitamin C; depending on the product. The
power of the Cornell Hydro-Transport pump allows food producers to
deliver their now chilled and treated ingredients to any point in the
plant where they want to dry, mix and pack the final product.
8NHPP-F18K cast-iron hydro flow
food pump with stainless steel impeller, eight-inch inlet and outlet.
Stainless steel body pump also available; --call 315-589-4511 do
discuss your specific requirements.
- Manufacturer rated for solids handling ability
for product sized up to 5 inch diameter by 9 inches in length.
Larger diameter pumps are available for larger product sizes; --call
315-589-4511 to discuss your specific application requirements.
- Expanded volute PP series pump for the ultimate
in gentle handling of delicate food products. So gentle the
manufacturer rates for pumping live fish!
- Specifically designed and built for industrial food processing application
use, with tons-per-hour throughput capacity.
- Manufacturer recommends 2 or 3 to 1 ratio of
water to product, with your product capacity determined by horsepower,
RPM, and total dynamic head resistance. Pump curves are available
by request; --call 315-589-4511 to discuss your specific application
- Feed tank and drive available separately (not
included unless otherwise specified); --call 315-589-4511 to discuss
your specific configuration requirements.
Others use the chill flume for pre-cooling blanched (very lightly
cooked to kill the active enzymes) food products in water prior to
running them through an IQF freeze tunnel. Others use the cooling flume
system just to convey product in water.
In every case, the powerful Cornell pump can gently move high
tons-per-hour output to wherever it needs to go in the plant.
Alard also stocks and handles various kinds of dewatering,
solids-separation, water recovery and filtration equipment to recover
the food product from the pump water, and to recapture, treat and
recirculate the water as necessary, as well as drying and packaging
equipment to complete the process; all tailored to the end-user's
specific food product(s) and application.
With Cornell's large range of hydro-transport pump size and material
configurations, and with Alard's ability to configure and "gear" the
pump to the buyer's specific needs, Alard's Cornell Hydro-Transport
based flume kits are a superb tool for a wide variety of industrial
food processing applications.
As of this writing, this 8 inch
Cornell FOOD PUMP is in stock NEW at Alard available for immediate
shipment as a pump only, or can be integrated with a feed tank and
drive (at extra charge) for a timely shipment.
AVAILABLE (extra cost) OPTIONs - can be configured with tank and drive,
8 inch food pump TANK shown above is in stock new, Alard item Y5130
CALL 315-589-4511 to confirm
availability, and to discuss your particular hydrofood pump application
item reference #: Y4997
Unless otherwise stated, volume, speed,
and/or capacity estimates given are those of the manufacturer(s) of the
equipment. All offers are subject to prior sales and owner's
confirmations. Unless otherwise specified, any prices shown do not
include skidding, crating, or freight.